TmeShare Posted February 23, 2007 Report Share Posted February 23, 2007 I have one of the new generation Breitling Chronomat Evolutions. Nice watch but at either end of the flip top claps there are srew heads on each side that continue to come loose. Any one else experiencing this problem? TimeShare Quote Link to comment Share on other sites More sharing options...
b16a2 Posted February 24, 2007 Report Share Posted February 24, 2007 I have one of the new generation Breitling Chronomat Evolutions. Nice watch but at either end of the flip top claps there are srew heads on each side that continue to come loose. Any one else experiencing this problem? TimeShare I havent had a problem, but screws coming loose in a rep is not uncommon. A bit of loctite always does the job. Quote Link to comment Share on other sites More sharing options...
Del_RFC Posted February 24, 2007 Report Share Posted February 24, 2007 I havent had a problem, but screws coming loose in a rep is not uncommon. A bit of loctite always does the job. Whats the best kind of Loctite for the job. Simple superglue or are we talking a product designed for locking threads? Cheers Del.... Quote Link to comment Share on other sites More sharing options...
Usil Posted February 24, 2007 Report Share Posted February 24, 2007 Use LocTite that can be removed, not permanent. It will keep them inplace but allow you to reove if you have to. I use LocTite Blue 242 (removable) - part number 24200. Obtain from hardware stores. Usil Quote Link to comment Share on other sites More sharing options...
Del_RFC Posted February 24, 2007 Report Share Posted February 24, 2007 Use LocTite that can be removed, not permanent. It will keep them inplace but allow you to reove if you have to. I use LocTite Blue 242 (removable) - part number 24200. Obtain from hardware stores. Usil Thanks Usil, Will try to pick some up today. Del.... Quote Link to comment Share on other sites More sharing options...
watcher Posted February 24, 2007 Report Share Posted February 24, 2007 The same thing happened on my Bentley clasp but all the screws can give problems. Check them periodically if you wear it often. Quote Link to comment Share on other sites More sharing options...
jkerouac Posted February 24, 2007 Report Share Posted February 24, 2007 If you are talking about the screws for the small links directly on either side of the clasp, remember that you can't just tighten each side separately. Rather, you have to hold one side still with a screwdriver while tightening the other side with a second screwdriver. Quote Link to comment Share on other sites More sharing options...
rhoderage Posted February 1, 2009 Report Share Posted February 1, 2009 The number 30 on my bezel fell off likely due to a loose screw and I just received the watch. I didn't even notice it was missing until i put it on. Can anyone tell me where I can get the replacement part? It's just the number 30 and the screw. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.