Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Swiss 7750 Tag Carrera


verbal

Recommended Posts

Not easy but possible... for an amateur that is...

This type of work must be a walk in the park for the The Zigmeister's and RBJ amongst us, but hey, i pulled it off and am very pleased with the result. :thumbsupsmileyanim:

Here's the idea; I got a Valjoux 7750 off Ebay some time ago (I was planning to install that in my Ti GST but failed miserably (lesson learned)), and it would be a good candidate for the new Carrera, the datefont bothered me so initially I figured out that a simple datewheel swap will do the trick but decided to swap the movement and see if I can do the trick..

When the Carrera arrived from King the datwheel looked like this:

207973-168.jpg

You see what I mean with "wrong"

A side by side , on the left the Swiss

207973-169.jpg

Swapping the movement is easy, even for me but then the challange started, the hands and especially the center seconds hand.

I've read The Zigmeister's post before and knew the hands weren't interchangable so I ordered the correct size from Ofrei.

I was planning to use just the .25mm bus and glue it on the rep seconds hands, but is was easier to cut the hand down to just the center piece holding the bus and glue that on the rep seconds hand..

here's what I mean, hope it makes sense:

207973-170.jpg

The Ofrei hand didn't fit right away, it was a pain to get in on, mainly caused by the fear of breaking the movement in the process... <_<

All in all I very pleased with the result, it does look a lot better than the original datewheel plus I get the bonus of a real smooth running movment.. :victory:

207973-171.jpg

207973-172.jpg

Thanks for reading :rolleyes:

Link to comment
Share on other sites

Wow... I really like it! The ETA datefont looks so much better than the stock Asian one. Correct regulator on the movement and correct date wheel..

I am thinking about doing the same, I just bought the Racing Carrera from Dani, and I have a stock ETA 7750 in the drawer..

Congrats! :victory:

Link to comment
Share on other sites

Putting back the chrono hands is indeed a pain. To make it easier, try using either a bit of Rodico on a toothpick, the hand will stick on the Rodico and it won't leave any staines, or cut a cotton bud in half and use that as a 'pick-up and place tool'.

That looks awesome. I hate putting on subdial hands! Thats one of the toughest things to do when putting your watch back together unless I'm missing some trick.

-bosk

Link to comment
Share on other sites

...

Swapping the movement is easy, even for me but then the challange started, the hands and especially the center seconds hand.

I've read The Zigmeister's post before and knew the hands weren't interchangable so I ordered the correct size from Ofrei.

I was planning to use just the .25mm bus and glue it on the rep seconds hands, but is was easier to cut the hand down to just the center piece holding the bus and glue that on the rep seconds hand..

here's what I mean, hope it makes sense:

The Ofrei hand didn't fit right away, it was a pain to get in on, mainly caused by the fear of breaking the movement in the process... <_<

All in all I very pleased with the result, it does look a lot better than the original datewheel plus I get the bonus of a real smooth running movment.. :victory:

Thanks for reading :rolleyes:

Whoa, great post and great result. I'm planning on something similar, but still hunting for Swiss 7750 on bay. How much did you pay for it ?

Did you have to get small subdial hands also ? In The Zigmeister's article it seems they are also different. Do you happen to have part numbers you ordered from Ofrei ?

Congrats again on your almost-gen :thumbsupsmileyanim:

bye,

Ivan

Link to comment
Share on other sites

@Ivan,

The movement came off Ebay for EUR 140 (about USD 170) and the subdial hands fitted right away, I'm sure it's not a 100% fit as The Zigmeister mentioned, but the hands move smoothly when chrono is running and they all reset to "0" perfectly, but more importantly, they don't fall off when wearing :brow:

The second chrono hand is a .025mm hand (http://www.ofrei.com/page499.html#12932) I've cut off the 'hand' and used only the bus plus the base..

Thanks for the compliment, I'm still waiting for a replacment dial from King, but I guess it's lost in the mail. The chrome ring around the bottom subdial is croocked, but that seems to be the case on all "red needles"

Whoa, great post and great result. I'm planning on something similar, but still hunting for Swiss 7750 on bay. How much did you pay for it ?

Did you have to get small subdial hands also ? In The Zigmeister's article it seems they are also different. Do you happen to have part numbers you ordered from Ofrei ?

Congrats again on your almost-gen :thumbsupsmileyanim:

bye,

Ivan

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up