Assasimon Posted April 10, 2006 Report Posted April 10, 2006 Howdy Folks! Is it possible to remove the cyclops on for example a Sub without destroying rest of the glass? Best regards! Jim
ubiquitous Posted April 10, 2006 Report Posted April 10, 2006 Howdy Folks! Is it possible to remove the cyclops on for example a Sub without destroying rest of the glass? Best regards! Jim If sapphire... Yes. Acrylic poses more of a problem, and hence requires more caution.
Assasimon Posted April 11, 2006 Author Report Posted April 11, 2006 If sapphire... Yes. Acrylic poses more of a problem, and hence requires more caution. Ok, but how do I do it? Regards! Jim
Kerbus Posted April 11, 2006 Report Posted April 11, 2006 (edited) I wonder if the use of a newer kind of plastic razor blade, the kind seen for boat and automotive applications, may add one more measure of safety to the procedure. But maybe it wouldn't be strong enough? Edited April 11, 2006 by Kerbus
Canuck88 Posted April 11, 2006 Report Posted April 11, 2006 I wonder if the use of a newer kind of plastic razor blade, the kind seen for boat and automotive applications, may add one more measure of safety to the procedure. But maybe it wouldn't be strong enough? I've used a soldering iron to head up the cyclops (and thus the bonding agent) and it simply slid off... then wiped the rest off and presto. YMMV of course.
Assasimon Posted April 11, 2006 Author Report Posted April 11, 2006 Ok, super! Thank you for the advices... Now I only have to think witch method to use. Regards! Jim
Assasimon Posted April 12, 2006 Author Report Posted April 12, 2006 Well I tried a little heat yesterday to without any luck. I´ll better leave the cyclops alone for now then... Thank´s for all the suggestions! Regards! Jim
rbj69 Posted April 12, 2006 Report Posted April 12, 2006 i use a heat gun and heat it till it gets too hot to touch then i use a razor and pust it off , then i wait till it cools and use a razor blade to peel off the residue glue from the crystal, hope this helps
Assasimon Posted April 14, 2006 Author Report Posted April 14, 2006 Hmm... Should I really warm the cyclops/chrystal that much? Can´t the movement or the bezel get damaged?
Chronus Posted April 15, 2006 Report Posted April 15, 2006 I tried a little heat (well, a LOT of heat) and mine didn't come off. Magnification looks off...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now