elwopo Posted May 22, 2007 Report Share Posted May 22, 2007 Hello, I just received what I thought was a gen Tag. The model number is CK1112.BA0328 but it is not listed on their website. Maybe it's an old model....I don't know. I went to adjust the bracelet and take out what looked to be screws. 1mm in diameter yet the "screw heads" are extremely shallow. Too shallow for a driver. I tapped lightly to get the driver into the slot....and the "screw" turned out to be a pin that pushed through. Does anyone know if this is how they are truly made.....or did I get a rep with pins that are meant to look like screws? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
deltatahoe Posted May 22, 2007 Report Share Posted May 22, 2007 i don't know anything about tags, but i'm guessing pictures would probably help the experts figure out if this watch is a replica or genuine... hoping you've got yourself a genuine... deltatahoe Quote Link to comment Share on other sites More sharing options...
miquel Posted May 22, 2007 Report Share Posted May 22, 2007 (edited) I have a 2000 Professional, model # 973.006. My bracelet has pins. On the inside of the bracelet it also has arrows to show which way the pins need to be pushed out. Edited May 22, 2007 by miquel Quote Link to comment Share on other sites More sharing options...
Sweattdogg Posted May 22, 2007 Report Share Posted May 22, 2007 A lot of Gen Tags have pins. I agree with the above poster in looking for the arrows which tell you which way the pins come out. The pins are split in the middle which could give the look of a screw. What model is it? Quote Link to comment Share on other sites More sharing options...
J-Auz Posted May 23, 2007 Report Share Posted May 23, 2007 Hello, I just received what I thought was a gen Tag. The model number is CK1112.BA0328 but it is not listed on their website. Maybe it's an old model....I don't know. I went to adjust the bracelet and take out what looked to be screws. 1mm in diameter yet the "screw heads" are extremely shallow. Too shallow for a driver. I tapped lightly to get the driver into the slot....and the "screw" turned out to be a pin that pushed through. Does anyone know if this is how they are truly made.....or did I get a rep with pins that are meant to look like screws? Thanks in advance. anyway to post some photos? that might really help! Quote Link to comment Share on other sites More sharing options...
elwopo Posted May 23, 2007 Author Report Share Posted May 23, 2007 Hello all. Thanks for the assistance! It's exactly like some of you said. Pins that look like screw heads when compressed. I was able to get them out using a 1mm screwdriver to push them. The bracelet is now sized perfectly and the watch is in rotation. BTW....looking for a good rep rlx a long time ago has gotten insanely expensive! 14 reps...a gen sub....gen tag....and in the last week....gen tt rlx black and gen tt rlx blue....ugh!! anyway to post some photos? that might really help! Quote Link to comment Share on other sites More sharing options...
Physher007 Posted May 24, 2007 Report Share Posted May 24, 2007 One should also note that yours is a less popular model (i have the same) and therefore less likely to be rep'd. Wear it well Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.