Guest HeWhoIsLikeGod Posted April 18, 2006 Report Share Posted April 18, 2006 (edited) Okay here is my new watch! It is a DW 6263 PN with 7760 movt. It is a manual version of 7750. I had to clean some finger prints of the hands, but other than that, it was absolutley amazing to see this watch in person. It is almost flawless. The thing I love the most is the fact that it is a fully functioning chronograph as opposed to the other DW's that are frozen at the 6 sub. Please share with me your opinions on the watch and any flaws you can find and how you would correct the flaw if possible. Also, I am not in a position to be able to afford to have this watch serviced as I had to stretch my budget to afford this anyway. It was my 19th birthday present. Anyway, if one of our watchsmiths here on the board would like to service it at a substantial discount and do a review of the movt for everyone's future reference let me know. Thanks for looking. Edited April 18, 2006 by HeWhoIsLikeGod Link to comment Share on other sites More sharing options...
Guest overboosted Posted April 18, 2006 Report Share Posted April 18, 2006 I just made a mess in my pants. Seriously though, BEAUTIFUL watch. I am no expert so I dunno the flaws but sweet. Where and how much !! Oh yeah, hit enter after your pics and your post wont be 3 feet wide or is it just me? Link to comment Share on other sites More sharing options...
Richard Tracy Posted April 18, 2006 Report Share Posted April 18, 2006 Beautiful Piece ! I never knew about the 7760.. is it Asian or Swiss ...? Thanks ! Link to comment Share on other sites More sharing options...
Guest avitt Posted April 18, 2006 Report Share Posted April 18, 2006 Niiiiice. OK, so many questions...Where to start....Did you have to mode the case? How does the movement fit? Is it secure with case clamps? Who's dial is that...DW? Are you using VJ72 hands, or DW hands? Did the stem line up? Please share what you can...This is intriguing. Link to comment Share on other sites More sharing options...
ubiquitous Posted April 18, 2006 Report Share Posted April 18, 2006 Hmmmm... Very interesting. 7760... Time to do some research Link to comment Share on other sites More sharing options...
Guest overboosted Posted April 18, 2006 Report Share Posted April 18, 2006 WE NEED ANSWERS! Very impatient we are. How dare you post this and walk away. I will never sleep tonight. Link to comment Share on other sites More sharing options...
Guest HeWhoIsLikeGod Posted April 18, 2006 Report Share Posted April 18, 2006 I expect lots of questions as there are a few so far. I will do my best to answer them all, but I really don't know that much about the finer details of the watch. That is why I would love it if one of the watch movt. experts would volunteer to take apart and evaluate the movt. Anyway, I have to go, but I will come back later tonight and answer any questions I can. Link to comment Share on other sites More sharing options...
Guest HeWhoIsLikeGod Posted April 18, 2006 Report Share Posted April 18, 2006 (edited) Oops, double posted the above post. Edited April 18, 2006 by HeWhoIsLikeGod Link to comment Share on other sites More sharing options...
ridnwind Posted April 18, 2006 Report Share Posted April 18, 2006 WOW! Congrats... That is one fine watch. Click "Paul Newman" Link to comment Share on other sites More sharing options...
Guest avitt Posted April 18, 2006 Report Share Posted April 18, 2006 I think that the only flaw in this watch would be the subdial spacing, which is probably the same as the 7750...If so, it's just about ideal. Link to comment Share on other sites More sharing options...
rek001 Posted April 18, 2006 Report Share Posted April 18, 2006 Did you get this with the 7760 movement directly from David, or was a different movement installed after you got it? Link to comment Share on other sites More sharing options...
abakan Posted April 18, 2006 Report Share Posted April 18, 2006 http://www.boley.de/pbilder/explosion/ESA%5CESA7750%2Epdf 7760 seems to have subdials as 7750: at 12, 9, and 6 with day/date at 3. It has to be modified for PN, but at 7mm movement thickness I think it is pretty tight in DW's case. more information please Link to comment Share on other sites More sharing options...
Craytonic Posted April 18, 2006 Report Share Posted April 18, 2006 Please more info!!! Link to comment Share on other sites More sharing options...
RWG Technical Posted April 18, 2006 Report Share Posted April 18, 2006 Based on past experiences, I think that this is the same Asian 7750 (not a typo) I have seen in other watches, including the PAM 050 models... I just finished servicing a PAM 050, which is an asian 7750 with the autowinder - but the chrono parts removed. The "7760" is only a 7750 - with the autowinder removed. The movement would be a bit thinner than the 7750, only due to the Rotor not being on the movement. The same thing could be done with any 7750, simply remove the rotor and autowinder gears... It would be nice to have the caseback removed so we can get the answers to the questions. There are plenty of Daytona cases that the 7750 series fits into, I suspect that this is the situation with this one. Any way to open the caseback and take a picture? RG Link to comment Share on other sites More sharing options...
Guest HeWhoIsLikeGod Posted April 18, 2006 Report Share Posted April 18, 2006 @ The Zigmeister How would I go about taking of the caseback? Link to comment Share on other sites More sharing options...
Guest overboosted Posted April 18, 2006 Report Share Posted April 18, 2006 Where did you get this watch? Link to comment Share on other sites More sharing options...
Guest HeWhoIsLikeGod Posted April 19, 2006 Report Share Posted April 19, 2006 Where did you get this watch? I got the watch from David Wong. Link to comment Share on other sites More sharing options...
ubiquitous Posted April 19, 2006 Report Share Posted April 19, 2006 Had a look into the '7760', and, just as ziggy mentioned above, the movement is simply a 7750 without a rotor. That means incorrect subdial spacing, and too high of a beat rate. Probably a very nice watch none the less, but one I'll probably not inquire on with DW. Link to comment Share on other sites More sharing options...
Guest avitt Posted April 19, 2006 Report Share Posted April 19, 2006 I believe, based on this thread, and another member's experience, that this 7750 based watch is now DW "standard issue" Daytona. It makes those VJ23 models even more valuable... Link to comment Share on other sites More sharing options...
Guest HeWhoIsLikeGod Posted April 19, 2006 Report Share Posted April 19, 2006 DW actually offers the VJ72 copy or I guess it is the VJ23. I had to ask to have this movt installed because I wanted full functionality and still have manual wind. I have compared to genuines and the subdial spacing is almost dead on. I can't even notice a difference with the naked eye. I have been running the chronos for quite a few hours now and everything is smooth as can be. I love this watch and think it is a better rep than any of the vj23 reps. The only complaint I have is the cheap bracelet. I am looking to put a leather strap on the watch. I think it would take a 19mm strap, right? Where could I find a rolex buckle? And what size would I need? Lastly, anyone know where I can find a smooth black calf strap to fit this watch? I have search everywhere and can only find it with croc print, which I am not a fan of. Thanks Link to comment Share on other sites More sharing options...
krustybrand Posted April 19, 2006 Report Share Posted April 19, 2006 The Rolex buckle can be had on Ebay. Try to find some gen pics first so you can get the correct design. I believe 16mm will do nicely. The trick will be finding a 19mm band. It's a very odd size nowadays. Try this link http://www.watchnetwork.com/watchstraps/index.html Link to comment Share on other sites More sharing options...
Guest avitt Posted April 19, 2006 Report Share Posted April 19, 2006 I'm sure that this movement has advantages over the VJ23...But the drawback is the fact that you won't be able to change the dial to a genuine Singer if you want to...It may never matter to you. Beautiful Daytona...Enjoy it! Link to comment Share on other sites More sharing options...
krustybrand Posted April 19, 2006 Report Share Posted April 19, 2006 (edited) A pic shamelessly stolen from someone on TZ of a gen with leather; Edited April 19, 2006 by krustybrand Link to comment Share on other sites More sharing options...
nicknoh Posted April 19, 2006 Report Share Posted April 19, 2006 (edited) Beautiful watch. Subdial spacing looks fine to me, although slightly wide. The one flaw I notice on all Rlx reps is the metal crown on the dial is always too flat... and not rounded like genuine. Edited April 19, 2006 by nicknoh Link to comment Share on other sites More sharing options...
rbj69 Posted April 19, 2006 Report Share Posted April 19, 2006 thats very nice, i would be interested to know if the subdial spacing is correct, if so then it is definitely the better choice for this watch , wear it well, for the record the braclet should fell cheap, cause it is lol Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now