Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Need help to find CG


messenius

Recommended Posts

Hi

New to this forum and started my pam affection by putting together a franken pam. I know this might not be the easiest way to start, but I'm allready on my way and found out that to complete this project I need your help and wisdom.

So the situation is following. I have a jimmyzfu case with bezel, crystal, caseback and dial and hands. The movement is on its way, so what I need most a this point is a crown guard. Since Jimmy has run out his guards I have to find one that fits to his case.

By reading earlier threads, I have found out that this isn't a easy quest. It seems that Jimmy's cg quality is hard to match. Also Jimmy told me that his case is based on F series and in my understanding these guards are smaller than present 'historic' (H series onwards) ones. So what I am dreaming of is to find cg that is right size, good quality and don't need excessive modding. Am I asking too much?

Best

Messenius

Link to comment
Share on other sites

Rep crownguards will fit but you need to make sure the screws do as well. The CG's are almost impossible to find. I have seen more than four figure PAM trade fall apart over the lack of a Jimmy CG. I would guess the going rate, if you can find one, is well in excess of the cost of any other part - certainly $200+. :wounded1:

Link to comment
Share on other sites

Rep crownguards will fit but you need to make sure the screws do as well. The CG's are almost impossible to find. I have seen more than four figure PAM trade fall apart over the lack of a Jimmy CG. I would guess the going rate, if you can find one, is well in excess of the cost of any other part - certainly $200+. :wounded1:

True.. couldn't have said it better.

Link to comment
Share on other sites

Yep, yep, yep yep... Jimmy's crown guards are the bomb....

Feast you eyes on these pics.... purchased this second hand jimmy crown guard from V just after jimmy sold his last one.... I broke in to a panic thinking I would never get a another chance to get my hands on one of these master pieces... luckily V posted this one in the offers section and I snatched this of V's hands in like a nano second...It surprised me that several members had past this by, disapointed that it was second hand....

Anyway I and more the happy with this baby, looking for a gen crystal and gen dial to build a handsome franken Panerai painted dial base....

Good luck on your quest...

Configuration:

Jimmy case

Jimmy CG

Jimmy Bezel

Palp Crown

PS sorry but this baby is not for sale, not even for 500$

post-406-1183676802_thumb.jpg

post-406-1183676808_thumb.jpg

post-406-1183676813_thumb.jpg

post-406-1183676819_thumb.jpg

Link to comment
Share on other sites

Thanks for help guys.

I was almost ready to settle for any cg that fits my case, but after having closer look of ravishingrick's pictures there seems to be only one option for me :(

So what is needed from me right now is patience, good luck and serious cash... and offers from you lucky owners of this small piece of fine crafted metal ;)

messenius

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up