DuDro Posted January 21, 2008 Report Posted January 21, 2008 There was once a dealer that carried these... I even saw one that was double-sided and opened both the 44mm and 47mm cases! Who has one? Where did you get it? How much did you pay? Are these still available at a "reasonable" price? Thanks in advance for your input!
Cats Posted January 21, 2008 Report Posted January 21, 2008 I also once have seen a "double" one but i can't recall it anymore. HOpe some one can tell us if they work properly and were to buy the "double" one. Carpe Diem Cats
babola Posted January 21, 2008 Report Posted January 21, 2008 Davidsen once had double sized (44 & 47mm) aluminium case opener. It was made as a knockout of the 2 genuine caseback openers you posted above, but IMO much better as it combined the two in one. See if he's got any left... :-) babola
PAMman Posted January 21, 2008 Report Posted January 21, 2008 I have one of these 44mm openers and can recommend it. I'll look back through my records to see if I can check where it came from.
chubbchubb Posted January 21, 2008 Report Posted January 21, 2008 They are from Angus, (Pure Time) and they are about 45$ each plus shipping. This is the best you can get for your PAMs. I have both sizes and I can only recommend getting these. Just send Angus a PM...
PAMman Posted January 21, 2008 Report Posted January 21, 2008 Mine came from 'Watchinger', who had these posted on Paneristi, but I don't have any contact details now.
tech Posted January 21, 2008 Report Posted January 21, 2008 Watchinger from DE supplied mine...it works like a champ
lello Posted January 22, 2008 Report Posted January 22, 2008 My supplier here in Florence (Firenze), has them in stock. Not sure about the price, but it should be something around
TeeJay Posted January 22, 2008 Report Posted January 22, 2008 I use dish-washing gloves, and have been able to maintain a water-tight seal, on closing the watch, every time with them. Also good for use on Omegas and Rolexes... And dishwashing
kenmasters Posted January 25, 2008 Report Posted January 25, 2008 I picked up one of these from Ofrei... its not that bad.. just don't throw it near a dog..
jaclarkaus Posted January 30, 2008 Report Posted January 30, 2008 When I opened mine, the 'o' ring popped out before fully undone, and now seem too big to fit back in. Are they replaced every time you take the back off? If so, are they standard parts?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now