stilty Posted January 23, 2008 Report Share Posted January 23, 2008 I'm looking to get a new set of screwdrivers and upgrade from my current set. My local supply house carries both lines, but does not have either set in stock so I can't compare. Anyone use either the Horotec or Bergeon screwdrivers? Thoughts? I'm thinking of going Bergeon as they seem to be a standard on most benches. $100+ for a set with stand. Link to comment Share on other sites More sharing options...
HauteHippie Posted January 23, 2008 Report Share Posted January 23, 2008 I'm looking to get a new set of screwdrivers and upgrade from my current set. My local supply house carries both lines, but does not have either set in stock so I can't compare. Anyone use either the Horotec or Bergeon screwdrivers? Thoughts? I'm thinking of going Bergeon as they seem to be a standard on most benches. $100+ for a set with stand. Horotecs are nicer. But as much as I'd like a set of these... ....$225 is out of my league as a part time tinkerer. Bergeons are fine. Link to comment Share on other sites More sharing options...
offshore Posted January 23, 2008 Report Share Posted January 23, 2008 There was discussion recently @ NAWCC forum, that the Bergeon blade quality had dropped off of late.(but i'm sure they were still happy enough with the drivers) I have an old set, which are great, and fortunately got a large supply of older blades (but not all sizes) May pay to ask the question, and also see if Horotec blades, (or whatever your guy stocks) will retrofit! I could spare you a few, (although the popular sizes are light on) Offshore Link to comment Share on other sites More sharing options...
stilty Posted January 23, 2008 Author Report Share Posted January 23, 2008 Thanks guys! I'll look for that discussion on the blade quality. I'll check if they are compatible as well. Link to comment Share on other sites More sharing options...
freddy333 Posted January 23, 2008 Report Share Posted January 23, 2008 I use Bergeon, but mainly because I was taught to use them. But I have heard nothing but good things about the Horotecs, so I think it is mostly a case of personal preference -- which feels better in your hand (similar to the way you try on watches). Both are industry standards, so you cannot lose either way. Link to comment Share on other sites More sharing options...
RWG Technical Posted January 23, 2008 Report Share Posted January 23, 2008 I sold my Bergeron screwdrivers and replaced them with the Horotec ones. Horotec in my opinion is far better quality, the Horotec ones are all ball bearings on the rotating heads, and you can really feel the difference when your using them. The Horotec blades are also so much better than the Bergeron ones. Most of my tools are Horotec, bezel remover, bracelet tool, crystal press etc... expensive YES, high quality YES YES... I bought the 9 piece Horotec set in the wooden box, and installed them in my Bergeron holder, they were just over $100 for the set. And I sold the Bergeron ones for $75...so I got a good deal. RG Link to comment Share on other sites More sharing options...
stilty Posted January 23, 2008 Author Report Share Posted January 23, 2008 Awewome, thanks for the replies. Link to comment Share on other sites More sharing options...
stilty Posted January 23, 2008 Author Report Share Posted January 23, 2008 Horotecs are nicer. But as much as I'd like a set of these... ....$225 is out of my league as a part time tinkerer. Bergeons are fine. This looks like a deal: http://www.stauntonweb.com/cloktols2.html $159 for a set. shipping included. Link to comment Share on other sites More sharing options...
HauteHippie Posted January 23, 2008 Report Share Posted January 23, 2008 This looks like a deal: http://www.stauntonweb.com/cloktols2.html $159 for a set. shipping included. That's pretty good! I wonder if they have the $580 Horotec crystal press for cheap... I drool everytime I see that thing. Link to comment Share on other sites More sharing options...
takashi Posted January 23, 2008 Report Share Posted January 23, 2008 Go for Horotec. Blade replacement is cheaper but has excellent quality. I use Bergeon but like stated above, I got my blade replacement from another brand. Link to comment Share on other sites More sharing options...
hooky Posted January 30, 2008 Report Share Posted January 30, 2008 Just bought Bergeon: Screwdrivers + replacement blades tweezers handsremover movement holder blower grease for the O rings magnifiers etc etc Link to comment Share on other sites More sharing options...
Daytona4me Posted January 31, 2008 Report Share Posted January 31, 2008 Dont buy the FB-1201 found here http://www.ofrei.com/page238.html I'm not happy with them. As someone else said, the blade quality has dropped. Link to comment Share on other sites More sharing options...
hooky Posted January 31, 2008 Report Share Posted January 31, 2008 Dont buy the FB-1201 found here http://www.ofrei.com/page238.html I'm not happy with them. As someone else said, the blade quality has dropped. That is what i also noticed with my new Bergeon's. The blades are easily damaged... How bout those Horotec? Link to comment Share on other sites More sharing options...
stilty Posted March 18, 2008 Author Report Share Posted March 18, 2008 I bought the 9 piece Horotec set in the wooden box, and installed them in my Bergeron holder, they were just over $100 for the set. I ended up buying the same set. I've been looking around, and found a set for $65/ including shipping. I haven't used them yet, but they sure do feel nice. I like the ball bearing top as well. Link to comment Share on other sites More sharing options...
maxmilian Posted March 18, 2008 Report Share Posted March 18, 2008 I ended up buying the same set. I've been looking around, and found a set for $65/ including shipping. I haven't used them yet, but they sure do feel nice. I like the ball bearing top as well. Do you mind telling us where you picked up ths set my friend ? Link to comment Share on other sites More sharing options...
drhydro Posted March 18, 2008 Report Share Posted March 18, 2008 I have a Bergeon set, about a year old, and have also found that the blades are pretty easily damaged- seem a bit brittle. So far I have not replaced blades, still sharpening them often- but I thinkI may grab a Horotec set. Link to comment Share on other sites More sharing options...
stilty Posted March 18, 2008 Author Report Share Posted March 18, 2008 Do you mind telling us where you picked up ths set my friend ? Don't mind at all.... www.bostonwatchexchange.com I think I may have bought the last set as I don't see them listed anymore. They were on sale so I'm guessing they were on clearance. $49.95 + $15 to ship to Canada. I wanted a set on the rotating stand, but for that price, I could not pass. The SLP was $119.99. Ofrei has them for $98, so I think I found a good deal. Link to comment Share on other sites More sharing options...
HauteHippie Posted March 18, 2008 Report Share Posted March 18, 2008 I ended up buying the same set. I've been looking around, and found a set for $65/ including shipping. I haven't used them yet, but they sure do feel nice. I like the ball bearing top as well. That is a great deal!! Link to comment Share on other sites More sharing options...
maxmilian Posted March 18, 2008 Report Share Posted March 18, 2008 Indeed a great deal !! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now