JWR Posted June 16, 2006 Report Share Posted June 16, 2006 what is the correct diameter spring bar to fit inside a panerai deployant clasp (on the semi-circular end)? I have had one just bend and I can't find a suitable replacement anywhere in my box of tricks... Additionally, where might one procure said appropriately sized springbar? Link to comment Share on other sites More sharing options...
Chronus Posted June 16, 2006 Report Share Posted June 16, 2006 i dont know the answer but europelli sell buckles, maybe they would have spares (like tubes and screws). Link to comment Share on other sites More sharing options...
ubiquitous Posted June 16, 2006 Report Share Posted June 16, 2006 Is this for a 44mm PAM? If so... My guess would be that the strap tapers down to 22mm (i.e. a 24/22 strap), so the deployant would probably be 22mm as well... Link to comment Share on other sites More sharing options...
JWR Posted June 16, 2006 Author Report Share Posted June 16, 2006 yeah, i know it's 22 mm, i meant the diameter of the actual spring bar -- like, is it 1 mm, or 2 mm thick? all the ones that i have won't fit through the hole in the buckle Link to comment Share on other sites More sharing options...
ubiquitous Posted June 17, 2006 Report Share Posted June 17, 2006 Ahhh... Good question. I dunno? Link to comment Share on other sites More sharing options...
swdivad Posted June 17, 2006 Report Share Posted June 17, 2006 It's not a spring bar, it is a component of the deployant. I think you'd be hard pressed to find a replacement as it is made for that model only. I think trusty and river both sell deployants (with rubber straps) and they won't break your bank. Link to comment Share on other sites More sharing options...
JWR Posted June 17, 2006 Author Report Share Posted June 17, 2006 It is actually a spring bar that has two small sleeves that cover it on either side of the 'post' -- i have ordered a selection of diameter bars from The Watch Prince and will report back -- I have the two side sleeves, but the actual spring bar has bent ... Link to comment Share on other sites More sharing options...
rocket Posted June 17, 2006 Report Share Posted June 17, 2006 It is actually a spring bar that has two small sleeves that cover it on either side of the 'post' -- i have ordered a selection of diameter bars from The Watch Prince and will report back -- I have the two side sleeves, but the actual spring bar has bent ... I fixed one of mine that broke with a 22 x 1.5 mm spring bar from my local watch shop Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now