Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

DIY PVD process


mastergod

Recommended Posts

Hi all.

Building on ideas spawned by the Tantalium/OxyClean project here on RWG: What about DIY PVD? This company sells four blackening coats for iron and steel (oxyclean only works on titanium and doesn't give very many options). Just thought I'd pass this on in case somebody's feeling adventurous. The "Mikrolok" finish might look like old pvd unless its too silvery. Price about USD 100/gallon. Some coatings need high temperatures. Others don't. Could it be the "TruTemp" coating is the shiny cartel pvd? Just a thought. Hope somebody out there gets some ideas ;) If anybody have any experience with this, please show your experiments.

cheers,

http://www.birchwoodcasey.com/metal/iron.html

Edited by mastergod
Link to comment
Share on other sites

Guest avitt

If you want to find out everything you've ever wanted to know about dark coatings, head over to the gun forums. You'll find that there are many "spray and bake" coatings, but nothing that can be compared with the finish and durability of PVD or DLC.

Link to comment
Share on other sites

  • 1 month later...

Sorry for chiming in here so late, I missed this thread until now.

Caswell Inc is selling a product that they claim able to blacken stainless steel:

http://www.caswellplating.com/kits/black.htm#stainless

In reality, I tried it and it did not work on rep cases other than on quite unusfeul parts like the bezel's inside. :(

Link to comment
Share on other sites

Sorry for chiming in here so late, I missed this thread until now.

Caswell Inc is selling a product that they claim able to blacken stainless steel:

http://www.caswellplating.com/kits/black.htm#stainless

In reality, I tried it and it did not work on rep cases other than on quite unusfeul parts like the bezel's inside. :(

Interesting. How about some pics anyway? Unless its a hassle:)

Link to comment
Share on other sites

Interesting. How about some pics anyway? Unless its a hassle:)

ASAP, and as long as I manage to find back those parts I tried... I might have thrown them away, in consideration of how bad they had come out. :(

Link to comment
Share on other sites

ASAP, and as long as I manage to find back those parts I tried... I might have thrown them away, in consideration of how bad they had come out. :(

Even if we find a product that blackens like PVD only half the battle is over--we'd still be left w/ the bead balsting which provides at least half the look of the final PVD.

Link to comment
Share on other sites

you cannot do it by yourself.

first , you need the right granulate and the right glass ceramic bead.

and you need the right experience.

in the dental technic, they use the right blasting machine.

but you need another bead material.

and another very important point is..., you may not blasting few ranges on the pam case.

my goldsmith in my local pvd company, who makes the blasting, knows exactly what is to do.

it's always better to use an expert. otherwise it will be a bad job and dilettantism.

rolli

Come on bead blasting places are not hard to find, i know of 3 with in 5 miles of my home. for less then 500 euros you can buy a cabinate, compresser ect and do it your self.
Link to comment
Share on other sites

I have to agree with Rolli on this one. This requires someone with a lot of experience and the appropriate equipment if you are trying to match up PVD's. I would not spend a lot of money on DIY pvd. ;)

Plus, let's face it: aside from Jack, PVD isn't that expensive. Even if you figure your time @ minimum wage, by the time you learn how to do it, you won't save much and probably won't like the result. I'll be outsourcing the PVD on my new 28 and spending my time on projects that have a reasonable chance of success.

Link to comment
Share on other sites

Plus, let's face it: aside from Jack, PVD isn't that expensive. Even if you figure your time @ minimum wage, by the time you learn how to do it, you won't save much and probably won't like the result. I'll be outsourcing the PVD on my new 28 and spending my time on projects that have a reasonable chance of success.

Yeah. Leave the risk-taking to the risk-willing. Totally agree with you regarding reasonable chance of success, however learning by doing terrible mistakes can be a good thing too ;)

Edited by mastergod
Link to comment
Share on other sites

Agree.

My tryings with the SS blackener were intended not to blacken a whole case (what I tried for the sake of experimenting, though), but rather small bits like screws, lever, lever pin, crown (it was a time when PVD crowns were not easy to find), and minor scratches on the PVD surface.

Also, hard to find a PVD company in my country.

Link to comment
Share on other sites

unfortunately, best pvd companies in germany and swizzerland.

rolli

Agree.

My tryings with the SS blackener were intended not to blacken a whole case (what I tried for the sake of experimenting, though), but rather small bits like screws, lever, lever pin, crown (it was a time when PVD crowns were not easy to find), and minor scratches on the PVD surface.

Also, hard to find a PVD company in my country.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up