P4GTR Posted April 11, 2008 Report Share Posted April 11, 2008 my strapculture has been rubbing against the case, you can see the wear. I think that the spot where the wear is occuring got wet at one time or another, which concerns me that its permanent damage. Can anyone give me some tips on how to care for this issue? Comments greatly appreciated! Link to comment Share on other sites More sharing options...
dluddy Posted April 11, 2008 Report Share Posted April 11, 2008 Let me quess....Is it a Davidsen model? Not much you can do other than get a strap with a thinner profile at the case side. 3-4MM max. The issue is the strap thickness - it rubs against the case side. Probably nothing to do with getting wet there.... Link to comment Share on other sites More sharing options...
P4GTR Posted April 11, 2008 Author Report Share Posted April 11, 2008 Nah, it's a 177H from Josh. Link to comment Share on other sites More sharing options...
dluddy Posted April 11, 2008 Report Share Posted April 11, 2008 Some models (most of Davidsen's) the lug holes are such that really thick straps like SC straps will rub.... Link to comment Share on other sites More sharing options...
dadog13 Posted April 11, 2008 Report Share Posted April 11, 2008 I am having my SC gator on my 029 and it happens the same...but I don't think there is anything to do... Link to comment Share on other sites More sharing options...
FxrAndy Posted April 11, 2008 Report Share Posted April 11, 2008 You might be able to limit the damage bu not using tubes or the other solution is to thin the strap at the lug end by reaming out the tube hole, i learnt this early on when i had to remake a couple of straps for a cutomer who uses DSN cases as they have shorter lugs, 47mm cases dont have this problem in general as they are rounded but all the 44mm i have seen require the lug ends quite thin to totaly avoid it. Link to comment Share on other sites More sharing options...
Masticore Posted April 11, 2008 Report Share Posted April 11, 2008 I had that problem with a mario paci strap on my 111 from davidsen. There is actually a very easy fix: Take a small screwdriver and scrape off some leather, in the hole where the screw goes into, against the case side. That way you make the strap thinner at the part that gets scratched by the case. If it isent enough, skip the tube. If you are really desperate, mill down the screw ( I would not do this personally.) A way to fix the the part thats already scratched by the case: Use some non-colour shoecreme, so it gets back its darker tone. Link to comment Share on other sites More sharing options...
P4GTR Posted April 12, 2008 Author Report Share Posted April 12, 2008 Excellent, I'll give that a try. Thanks guys. Link to comment Share on other sites More sharing options...
frankt Posted April 12, 2008 Report Share Posted April 12, 2008 Simple fix.... just rub some neutral Kiwi Shoe polish on the affected areas occasionally....Works for me!! ;) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now