RWG Technical Posted April 14, 2008 Report Share Posted April 14, 2008 This started life as a Asian 7750 (3) powered watch. I replaced the dial with an ETA 7753 compatible one, and installed an ETA 7753 in place of the Asian model. The dial fit fine, but needed a lot of material cut from the outer edge to get it in the case, the bezel ring for the 7753 was too large for the case so I transplanted the old Asian 7750 bezel ring onto this dial. One noted problem was that the "swiss made" was cut off on the bottom, owing to the narrower bezel ring. I fixed the "swiss made" by removing the lettering from the dial. Here is the final rendition, looks good... Other work includes Tritium lume. Thanks for looking. RG Link to comment Share on other sites More sharing options...
Guest porsche356a Posted April 14, 2008 Report Share Posted April 14, 2008 Rob, your work doesnt cease to astound. PERFECTION! Enjoy it W- Link to comment Share on other sites More sharing options...
b16a2 Posted April 14, 2008 Report Share Posted April 14, 2008 Another demonstration of your excellent work! Link to comment Share on other sites More sharing options...
HauteHippie Posted April 14, 2008 Report Share Posted April 14, 2008 A beautiful monster!!! Link to comment Share on other sites More sharing options...
fishgodeep Posted April 14, 2008 Report Share Posted April 14, 2008 One of a kind ....as are your skills Rob. This is franken monster from the deep !!! Link to comment Share on other sites More sharing options...
Sir-Lancelot Posted April 14, 2008 Report Share Posted April 14, 2008 Looks good Kruzer. You always have top notch watches. I like the idea of removing the swiss made. It looks better that to have it half missing. Great work as usual Mr. The Zigmeister. Link to comment Share on other sites More sharing options...
szvwj Posted April 14, 2008 Report Share Posted April 14, 2008 Beautiful job! I wish I had the skills to do work like that. Tritium lume? That must glow forever! I wonder if we can buy that stuff in the US. Do you prefer the Tritium over Superluminova or Noctilumina? Link to comment Share on other sites More sharing options...
RWG Technical Posted April 14, 2008 Author Report Share Posted April 14, 2008 Beautiful job! I wish I had the skills to do work like that. Tritium lume? That must glow forever! I wonder if we can buy that stuff in the US. Do you prefer the Tritium over Superluminova or Noctilumina? The Tritium is a mixture I custom mix with Super Lume. Tritium is illegal in most countries... RG Link to comment Share on other sites More sharing options...
owdeguy Posted April 14, 2008 Report Share Posted April 14, 2008 Wow, great job! How did you remove the lettering without having to refinish the black matt finish? Link to comment Share on other sites More sharing options...
RWG Technical Posted April 14, 2008 Author Report Share Posted April 14, 2008 Wow, great job! How did you remove the lettering without having to refinish the black matt finish? V E R Y Carefully...with a fine needle... RG Link to comment Share on other sites More sharing options...
tanya Posted April 14, 2008 Report Share Posted April 14, 2008 Awesome Once again !!!! Just Awesome!!!! Link to comment Share on other sites More sharing options...
tmg Posted April 14, 2008 Report Share Posted April 14, 2008 Artwork as usual The Zigmeister! Link to comment Share on other sites More sharing options...
milsub5517 Posted April 14, 2008 Report Share Posted April 14, 2008 The Zigmeister, you should have put T MADE IN The ZigmeisterLAND T on the dial instead great work ! Link to comment Share on other sites More sharing options...
dluddy Posted April 14, 2008 Report Share Posted April 14, 2008 Another Kruzer 1 of 1 done. Looks outstanding Zig Link to comment Share on other sites More sharing options...
Guest asad Posted April 14, 2008 Report Share Posted April 14, 2008 Very Nice! Link to comment Share on other sites More sharing options...
Stephane Posted April 14, 2008 Report Share Posted April 14, 2008 Now you remove stuff from a dial? Come on Ziggy, admit you are a robot If not, then you must be at least a bionic man Congrats on another very nice work Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now