Duffy33333 Posted August 1, 2008 Report Share Posted August 1, 2008 Hi, just had it for 2 days and now that: Winding it up, the crown got loose, it is only hold by the CG. Tried to screw it in , no chance, no hold. How can i handle this? Andr Link to comment Share on other sites More sharing options...
Guest carlsbadrolex Posted August 1, 2008 Report Share Posted August 1, 2008 What the hell is that gray stuff all over everything in those pics? Is it that dirty after two days? I kinda think that maybe I see the stem in there. If it has simply come unscrewed, then you will need to remove the case back, remove the stem from the movement, put the stem back in to the crown and replace the stem and crown as one piece back in to the movement. Sounds like alot of work, but for someone with some experience it is a 10 minute job. If you are not comfortable doing it (or have the proper tools) I would suggest finding someone who does. Link to comment Share on other sites More sharing options...
StormTooper4 Posted August 1, 2008 Report Share Posted August 1, 2008 Dudes im not sure its the stem, from what i can see inside the crown it looks like the spring, so the crown may of actually broken so you'll need to do what CBR suggested but remove whats left of the crown on the stem and then use the stem in a new crown good luck ST4 Link to comment Share on other sites More sharing options...
Duffy33333 Posted August 1, 2008 Author Report Share Posted August 1, 2008 What the hell is that gray stuff all over everything in those pics? Is it that dirty after two days? Think thats dirt, because the watch was used. Chance to clean it up... Thinks its only loose, not broken... Andr Link to comment Share on other sites More sharing options...
Duffy33333 Posted August 8, 2008 Author Report Share Posted August 8, 2008 Ok, so i have got the backplate open and turned the small screw near the stem. Does the stem get completely loose of this ? do i have to pull hard ( which is difficult, cause the rest is still in thee, hrd to reach) ? Andr Link to comment Share on other sites More sharing options...
capice Posted August 8, 2008 Report Share Posted August 8, 2008 don't pull too hard or you will wreck it..it has to come out pretty easy after you turn the releasescrew a little, if not give it another half turn. Should do the trick Link to comment Share on other sites More sharing options...
mikerblade Posted August 8, 2008 Report Share Posted August 8, 2008 Turn & 1/2 max should have the stem free You'll probably have to use tweezers to pull the stem but if its just backed out of the crown you could try to screw it back in & then pull it Dont be tempted to just unscrew the stem release or you'll pop the keyless & trust me thats a PITA to put back together (hands & dial will have to come off) Link to comment Share on other sites More sharing options...
dadog13 Posted August 8, 2008 Report Share Posted August 8, 2008 good lord...what's all the "oil" on the crown...never seen this on any of my PAM's...has somebody try to fill in the gas in that watch? that really shouldn't be there...you should clean it...IMO the stem unscrewed itself... maybe this tutorial will help you a little bit..it helped me when I changed crowns on one of my PAMs http://www.rwg.cc/members/index.php?showto...p;hl=palp+crown Link to comment Share on other sites More sharing options...
Duffy33333 Posted August 9, 2008 Author Report Share Posted August 9, 2008 Hi, thanks dadog for the tutorial, helped me very well. So i had to take the movement out to get the rest of the stem...seems to be broken, he? If i look into the crown (after pulling out the spring) there is nothing to see inside, not even a thread, is this ok? it looks very different to your crown, dadog... Andr Link to comment Share on other sites More sharing options...
Duffy33333 Posted August 18, 2008 Author Report Share Posted August 18, 2008 Hi, me again guys, after looking at my pictures again and again... could it be, that the circled part is the one i am missing inside my crown? Is it only pressed in ? or glued? whats the spring in the crown for? Andr Link to comment Share on other sites More sharing options...
sssurfer Posted August 22, 2008 Report Share Posted August 22, 2008 I think you are correct, Andr Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now