Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

How to relume Rolex markers correctly?


Bodo

Recommended Posts

Some of my Reps have bad Lume in the markers, but they look like genuine because they´re lumed flatly, even and with matt-white finish

Others ahve rather great lume which glows green in the dark but: In the light you can tell it´s a fake from the hi gloss finish and uneven application.

I have a genuine Yachtmaster and TT Sub so I can compare them.

Genuine Rolex never has hi gloss finish on the luminova.

It´s always matt, always even, always recessed from the edges.

So how can I relume the markers with matt finish Super-Luminova to give my reps the genuine look?

Is there anyone in Europe, better Germany, who does that job?

If someone had already done it I´d appreciate a how-to.

Edited by Bodo
Link to comment
Share on other sites

Its a combination of both things. When the gens are lumed they are done by machine and there are certain machine application varnish/binders that are mixed with the lume powder that give a glossy finish. This is not possible when applying lume by hand as different varnish/binders have to be used so after the lume has dried it will be matte. Then a coat of the varnish needs to be applied over the lume which will give the gloss finish to it.

Hand application will never be as good as a machine finish so it should be borne in mind as we all have a tendancy to examine our reps under magnification where, of course, any faults will be more apparent. But under the naked eye they should not be that visible. A rep is a rep so if perfection is what you want then buy the gen.

Link to comment
Share on other sites

only one guy that seems to get this mod right... The Zigmeister. i had him lume my 1680... he used an ivory matte lume which is very bright in the dark and has a smooth matte yellowish look of a real vintage in the light... i doubt this picture will show what i'm talking about well, but here it is (the dk flecks are not on the lume, but rain drops from when i took the pic outside):

83521-29874.jpg

Link to comment
Share on other sites

only one guy that seems to get this mod right... The Zigmeister. i had him lume my 1680... he used an ivory matte lume which is very bright in the dark and has a smooth matte yellowish look of a real vintage in the light... i doubt this picture will show what i'm talking about well, but here it is (the dk flecks are not on the lume, but rain drops from when i took the pic outside):

Not sure that only one guy gets it right!!!! I also have the Vintage Rolex lume in stock.

Link to comment
Share on other sites

I know very little about Polexes, but I suppose that reluming is not very different in different brands once the relumer knows about the needed nuances in different models and vintages. Then it all comes to hand precision and skill. And, as for that, I can add my witness that Finepics is second to noone (with all my respects to The Zigmeister), on the gorgeous job he made on my best watch.

Link to comment
Share on other sites

A genuine 16610 marker up close. The lume looks like snow packed into the marker...

83623-29861.jpg

However, I have seen a few genuine (modern) markers done a bit sloppily from Rolex SA. Seems that every now and then, a less than perfect ne will slip out of QC...

Edited by ubiquitous
Link to comment
Share on other sites

A genuine 16610 marker up close. The lume looks like snow packed into the marker...

83944-29796.jpg

However, I have seen a few genuine (modern) markers done a bit sloppily from Rolex SA. Seems that every now and then, a less than perfect ne will slip out of QC...

That´s what I mean.

Even, matte and recessed from the frame.

I´m curious how these markers are produced at the factory.

BTW I didn´t mean the old non frame markers. These are different from the modern type.

Link to comment
Share on other sites

And, as for that, I can add my witness that Finepics is second to noone (with all my respects to The Zigmeister), on the gorgeous job he made on my best watch.

I will second that :thumbsupsmileyanim: Finepics does a finerelume :yu:

Link to comment
Share on other sites

Thanks for all the compliments guys - the thing you have to remember is that Rolex do not hand lume their markers. They are all machine made on highly specialised equpiment and this cannot be nearly as well reproduced when luming by hand. Really the only solution to this would be to source an original dial - this is why Frankenwatches are the Rolls royce of reps - so to speak!!

Link to comment
Share on other sites

mee too! :D:D;)

finepics/palp... post a pic or two pics, that's more convincing. the tricky thing about the vintage lume jobs is that they do not have the metal retaining border that we see in ubi's closeup pic of that standard marker. without that, it takes a very steady hand. the other thing i like about zig's work is that it not only has the correct vintage-yellow tint, but it glows like a torch at night...

side story: i walked into an AG yesterday... one of the largest in metro NYC, in order to try on an Oris tt1. I was wearing the 1680 and took it off to try on the Oris. So the salesman picks up my 1680, looks it all over, then says "so how's your R-L-X running"... I said "runs fine, but i just wear that as a 'beater'" ... the guy's jaw dropped and nearly hit the floor... but, fwiw, this guy was pretty green and wouldn't have known a gen from a rep anyway... goes to show you who's really manning the counters at these AGs...

Link to comment
Share on other sites

Well, the great thing about the vintage dials is that the lume can vary so much with each specific example. Lots of different suppliers of dials, varying conditions that the watch was kept or stored in over time, etc. You have thick, puffy markers, uneven markers (from tritium swelling), flat markers, etc.

5513 Gilt dial:

84723-29630.jpg

1680:

84723-29631.jpg

1665 Rail Dial:

84723-29632.jpg

^_^

Link to comment
Share on other sites

finepics/palp... post a pic or two pics, that's more convincing. the tricky thing about the vintage lume jobs is that they do not have the metal retaining border that we see in ubi's closeup pic of that standard marker. without that, it takes a very steady hand. the other thing i like about zig's work is that it not only has the correct vintage-yellow tint, but it glows like a torch at night...

mine do not glow or only a little bit, i can vary that like i want to! the genuine vintages usually do not glow anymore or only a little bit...

85213-29536.jpg

85213-29537.jpg

Edited by palpatine
Link to comment
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up