dieselpower Posted October 13, 2008 Report Share Posted October 13, 2008 Does anybody have any experience of the pushers that cousinsuk are selling for 6263 Daytonas? I have been recommended the ones that ofrei is selling but have noticed something similar on the Cousins website and was wondering what the quality was like - they are certainly a lot cheaper! Thanks. Quote Link to comment Share on other sites More sharing options...
Stephane Posted October 13, 2008 Report Share Posted October 13, 2008 So far, no chance to install cousins pushers on a DW for us. "When they are installed the inner pusher is too long and you can Quote Link to comment Share on other sites More sharing options...
freddy333 Posted October 13, 2008 Report Share Posted October 13, 2008 "When they are installed the inner pusher is too long and you can’t install the Movement". Most pushers are made to fit many different watches, so the center pin is long & must be cut or ground down to the proper length to fit your case (if you buy a Rolex-packaged pusher, the extra cost goes to having them pre-cut the pusher pin to the proper length (more or less). 1 option is to install each pusher & then estimate how long the pin needs to be & remove it & cut it to length with heavy duty wire cutters (if you choose this option, cut a bit too long & then file it down to the exact length to avoid cutting too short). The other option is to install the pusher, estimate how long it needs to be & then use a small grinding bit with a Dremel to grind the pin down to the desired length. Quote Link to comment Share on other sites More sharing options...
Omega Posted October 13, 2008 Report Share Posted October 13, 2008 Not sure, but I think tribal has a tap for these cousins-pusher threads... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.