Cousins pushers

[dieselpower]

Does anybody have any experience of the pushers that cousinsuk are selling for 6263 Daytonas? I have been recommended the ones that ofrei is selling but have noticed something similar on the Cousins website and was wondering what the quality was like - they are certainly a lot cheaper! Thanks.

[Stephane]

So far, no chance to install cousins pushers on a DW for us.

"When they are installed the inner pusher is too long and you can

[freddy333]

"When they are installed the inner pusher is too long and you can’t install the Movement".

Most pushers are made to fit many different watches, so the center pin is long & must be cut or ground down to the proper length to fit your case (if you buy a Rolex-packaged pusher, the extra cost goes to having them pre-cut the pusher pin to the proper length (more or less).

1 option is to install each pusher & then estimate how long the pin needs to be & remove it & cut it to length with heavy duty wire cutters (if you choose this option, cut a bit too long & then file it down to the exact length to avoid cutting too short). The other option is to install the pusher, estimate how long it needs to be & then use a small grinding bit with a Dremel to grind the pin down to the desired length.

[Omega]

Not sure, but I think tribal has a tap for these cousins-pusher threads...