kingkaiser Posted October 30, 2008 Report Share Posted October 30, 2008 Guys, I was wondering about this: the sweeping movement on my ingy seems to actually be 5 rapid ticks. Is this correct? Or should it be a ridiculously smooth sweep with no visible ticks (even if you're looking hard for it)? From 3 feet away you cant tell, but anything less than that, you can actually see a slightly jerky movement...wanted to know if thats what the gen looks like too, or is it because the movement isnt up to snuff? Cheers Link to comment Share on other sites More sharing options...
Logan Posted October 30, 2008 Report Share Posted October 30, 2008 All mechanical movements have a discernible tick to the hands, it'll never be truly smooth. Its actually 8 ticks per second Link to comment Share on other sites More sharing options...
RWG Technical Posted October 30, 2008 Report Share Posted October 30, 2008 The smoothness of the sweep is directly related to the speed of the balance wheel. ETA's are mostly 28,800 Beats per Hour, or 8 ticks per second. Most Asian movements are 21,600 BPH, or 6 ticks per second. Handwinds are 21,600 or 18,000 (2.5 per second). If it's running ok, and keeping good time, then the ticks are what they are, you can't smooth it out. If you can open the caseback you can identify the movement type and then you'll know for sure the speed. What was it advertized as having for a movement? RG Link to comment Share on other sites More sharing options...
kingkaiser Posted November 2, 2008 Author Report Share Posted November 2, 2008 The smoothness of the sweep is directly related to the speed of the balance wheel. ETA's are mostly 28,800 Beats per Hour, or 8 ticks per second. Most Asian movements are 21,600 BPH, or 6 ticks per second. Handwinds are 21,600 or 18,000 (2.5 per second). If it's running ok, and keeping good time, then the ticks are what they are, you can't smooth it out. If you can open the caseback you can identify the movement type and then you'll know for sure the speed. What was it advertized as having for a movement? RG The movement was advertised as having an ETA 2824-2 Its keeping incredible time; I dont have the right equipment to pop the caseback, but since it was from PT, I'm pretty sure it is as advertised. I'm assuming then that its actually 8 ticks per second... The reason I asked this question is because I was looking at a Rolex which seemed to have no ticks at all (ie: perfectly smooth movement). Perhaps Rolex have more fluid movements than ETA (I think Rolex has inhouse movements - could be wrong), or perhaps it was just the poor lighting that made it seem that way... Link to comment Share on other sites More sharing options...
kingkaiser Posted November 2, 2008 Author Report Share Posted November 2, 2008 And I'm wondering if this answers the part about the Rolex with the smooth movement: http://www.rwg.cc/members/index.php?showto...amp;hl=sweeping If I understood it correctly, there is no "smooth" automatic watch...and the closest would be the Seiko Spring Drive... ( http://www.seikospringdrive.com/flash.html ) Link to comment Share on other sites More sharing options...
FxrAndy Posted November 2, 2008 Report Share Posted November 2, 2008 Thats right, there are some 36000 running chrono movements that would look very smooth too Link to comment Share on other sites More sharing options...
gbc Posted November 8, 2008 Report Share Posted November 8, 2008 The movement was advertised as having an ETA 2824-2 Its keeping incredible time; I dont have the right equipment to pop the caseback, but since it was from PT, I'm pretty sure it is as advertised. I'm assuming then that its actually 8 ticks per second... The reason I asked this question is because I was looking at a Rolex which seemed to have no ticks at all (ie: perfectly smooth movement). Perhaps Rolex have more fluid movements than ETA (I think Rolex has inhouse movements - could be wrong), or perhaps it was just the poor lighting that made it seem that way... The seconds hand in the Ingy are longer than that of most Rolexes. Longer hands will make the ticking more preceptible. All so check the timing of your watch. You can do this by setting & comparing with your PC's clock. See whether your watch is running slow over 3-5 day period. Had UPO losing a min a day. After speeding it up to keep good time ... the sweep was smoother as it was ticking faster than before. Link to comment Share on other sites More sharing options...
yellomen Posted November 9, 2008 Report Share Posted November 9, 2008 Thats right, there are some 36000 running chrono movements that would look very smooth too Indeed, the El Primero would look pretty smooth... Girard Perregaux also made several 36000 beats movement and probably several other high end brands have one or two high beat movements as well. Link to comment Share on other sites More sharing options...
apowers Posted November 19, 2008 Report Share Posted November 19, 2008 If you're are looking for fast movement, buy a Seiko Springdrive... It also has a 72hours power reserve, and is more accurate than 99% of the swiss movement Link to comment Share on other sites More sharing options...
Vlad1980 Posted November 19, 2008 Report Share Posted November 19, 2008 ^ that movement is sick! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now