pollux1 Posted March 10, 2009 Report Share Posted March 10, 2009 Hi all, my bezel insert from my PT sub won't stay on, I've taken the bezel off to file down the teeth for more positive clicks, but when I try to re-attach the bezel insert it won't stay with pressure fitting only, should it be glued on? Thanks for reading. Quote Link to comment Share on other sites More sharing options...
alligoat Posted March 10, 2009 Report Share Posted March 10, 2009 That's the best bet. I finally glued in my gen insert on my euromariner V3- it held 95% of the time but would pop off when I bumped the watch. Tolerances on these rep bezels isn't as good as the gens. Quote Link to comment Share on other sites More sharing options...
pollux1 Posted March 10, 2009 Author Report Share Posted March 10, 2009 That's the best bet. I finally glued in my gen insert on my euromariner V3- it held 95% of the time but would pop off when I bumped the watch. Tolerances on these rep bezels isn't as good as the gens. Thanks for the reply Alli, tell me did you glue the edge of the insert nearest the bezel itself? Quote Link to comment Share on other sites More sharing options...
BobM Posted March 11, 2009 Report Share Posted March 11, 2009 Be sure you do not put glue at the joint where the bezel rotates or you will have a niceinsert in a bezel that no longer rotates. Put glue only to the outside edge of the insert. Quote Link to comment Share on other sites More sharing options...
pollux1 Posted March 11, 2009 Author Report Share Posted March 11, 2009 Be sure you do not put glue at the joint where the bezel rotates or you will have a niceinsert in a bezel that no longer rotates. Put glue only to the outside edge of the insert. Thanks Bob Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.