TeeJay Posted April 21, 2009 Report Share Posted April 21, 2009 I was just wondering if anyone knew how deeply the holes are drilled into lugs, when they are not drilled though completely? Is it just a few mm, or a bit deeper? Quote Link to comment Share on other sites More sharing options...
jockl1978 Posted April 23, 2009 Report Share Posted April 23, 2009 I recieved a Explorer 1 (1016) which has fake outer lugholes - I tried to push out the pins from the outside like a maniac, until I saw they don Quote Link to comment Share on other sites More sharing options...
TeeJay Posted April 23, 2009 Author Report Share Posted April 23, 2009 I recieved a Explorer 1 (1016) which has fake outer lugholes - I tried to push out the pins from the outside like a maniac, until I saw they don Quote Link to comment Share on other sites More sharing options...
automatico Posted April 23, 2009 Report Share Posted April 23, 2009 Most that I have seen were drilled deep enough that the plug tip on a single or double flanged springbar will go in all the way to the shoulder. A few have been too shallow and had to be drilled out a little more by hand using a drill bit in a pin vice. As long as there is enough depth to hold the springbar securely, everything is Ok. plug = the part of the springbar that telescopes in and out of the springbar tube plug tip = the part that goes into the lug Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.