redwatch Posted May 21, 2009 Author Report Share Posted May 21, 2009 Ok so it seems I have hit a little snag. The little wishbone assembly that is geared to turn the date wheel seems a little off and because it is plastic, I can't seem to fix it. Either that, or when I put the thrust plate back over top of the date wheel, maybe its moving. I am not sure. Here are some photos. If anyone has any thoughts, input would be appreciated! Close up of the gear mechanism Close up of the "wishbone" pusher Link to comment Share on other sites More sharing options...
offshore Posted May 21, 2009 Report Share Posted May 21, 2009 To me, the shoulder on the high point of the "Y" seems a little "mulched up" One big problem with the OS movements, is that if when the movement enters the date change phase, and then the operator decides to reset the time, some level of damage occurs internally, which basically renders the movement US. I have never bothered to disassemble a movement like this, preferring to just swap in a new one, so have never investigated this. Maybe this is what we are seeing here? This problem is also very common in a lot of Seikos. particularly the 7T32. Offshore PS I think I may have a couple of dead OS movements in my box, however I believe they have the same symptoms Offshore Link to comment Share on other sites More sharing options...
a-replica Posted May 21, 2009 Report Share Posted May 21, 2009 Very professional tools.... i bet they are expensive Link to comment Share on other sites More sharing options...
redwatch Posted May 21, 2009 Author Report Share Posted May 21, 2009 To me, the shoulder on the high point of the "Y" seems a little "mulched up" One big problem with the OS movements, is that if when the movement enters the date change phase, and then the operator decides to reset the time, some level of damage occurs internally, which basically renders the movement US. I have never bothered to disassemble a movement like this, preferring to just swap in a new one, so have never investigated this. Maybe this is what we are seeing here? This problem is also very common in a lot of Seikos. particularly the 7T32. Offshore PS I think I may have a couple of dead OS movements in my box, however I believe they have the same symptoms Offshore That seems to be the exact problem with this one. Due to the nature of the plastic "Y" it seems to be sitting higher than it should naturally. May be a little beyond repair at this point. I will keep playing with setting it a couple more times and then it may be time to order a new one. Certainly learning a lot though! Having the magnifying headband sure does make life a whole lot easier! Link to comment Share on other sites More sharing options...
Chasingrabbits Posted May 21, 2009 Report Share Posted May 21, 2009 That seems to be the exact problem with this one. Due to the nature of the plastic "Y" it seems to be sitting higher than it should naturally. May be a little beyond repair at this point. I will keep playing with setting it a couple more times and then it may be time to order a new one. Certainly learning a lot though! Having the magnifying headband sure does make life a whole lot easier! You might try filing the high (rough) part down to see if this makes a difference. Of course this, would be a very tricky task and probably impossible to do. Your efforts have encouraged me to try a similar operation on one of my movements that has a broken tube. Thanks for supplying the great photos as well. I never knew my G9 could take such good macro's - it's a great little point and shoot, like you say. Link to comment Share on other sites More sharing options...
redwatch Posted May 21, 2009 Author Report Share Posted May 21, 2009 You might try filing the high (rough) part down to see if this makes a difference. Of course this, would be a very tricky task and probably impossible to do. Your efforts have encouraged me to try a similar operation on one of my movements that has a broken tube. Thanks for supplying the great photos as well. I never knew my G9 could take such good macro's - it's a great little point and shoot, like you say. The G9 is awesome. Of course a little mini tripod is mandatory for good, in focus macro's. Also, if you set it to Professional 'P' mode, and then press the center 'Func. Set' button, you can set a ton of things up custom. Choosing the white balance, and then moving the selection to the right to 'Custom 1' or 'Custom 2' allows you to do a white balance check. By pressing the 'Display' button, it will analyze the white balance and it is usually perfect. I also have the lens adapter LA-DC58H and an Opteka High Definition 10X Macro Lens. I also have a Polarizing Filter attached to that. It's an amazing combo. As for the 'Y' point, I think I might try that. It does seem to be binding on the bottom of the thrust plate when I re-attach it. That might do the trick. Thanks for the tip! Link to comment Share on other sites More sharing options...
redwatch Posted May 21, 2009 Author Report Share Posted May 21, 2009 So I just had a thought. Since I have come this far, why not improve upon things. The most obvious flaw in using this movement is the fact that the running seconds are at 6 o'clock instead of 9 o'clock like the gen. Is it worth it, or even possible to upgrade the movement in this watch? Or would I be better off putting the quartz movement back in, and then selling and buying a better quality rep? I am guessing that the hands will not fit the new movement, but maybe someone can give me some options? I am loving this project and I would like to take it further if I can. Link to comment Share on other sites More sharing options...
RickHiC Posted May 25, 2009 Report Share Posted May 25, 2009 I still don't see any rodico in your kit. That is mandatory. Besides removing marks, once you have some, you won't believe how you ever manipulated hands/screws/etc. into position without it. I just got an ultra-fine plastic tweezers of ebay that I like as well. Doesn't have the precision of metal ones, but they have their place as they won't scratch. As far as the G9, it's in the shirt pocket of many a professional photog along with the rest of their gear. The saying goes the best camera is the one that's with you. Can't always have a big dslr over your shoulder. I think the G9 in particular is still a better value than the newer G10, and the video is not bad either. Link to comment Share on other sites More sharing options...
krpster Posted May 25, 2009 Report Share Posted May 25, 2009 Nice work. Looks like you are having fun and learning stuff in the process. Best combo you can get. I look forward to seeing how this works out. Link to comment Share on other sites More sharing options...
redwatch Posted May 26, 2009 Author Report Share Posted May 26, 2009 I still don't see any rodico in your kit. That is mandatory. Rodico came in my last order from ofrei. Just didn't include it in the newest pics! It's awesome! I can't believe I didn't know about it before I got into watches. It's so useful in so many ways! Link to comment Share on other sites More sharing options...
redwatch Posted May 27, 2009 Author Report Share Posted May 27, 2009 Still waiting on any comments about upgrading this watch to a better movement. Anyone have any good franken mod suggestions for this project? Thanks! Link to comment Share on other sites More sharing options...
P_Diddy Posted June 1, 2009 Report Share Posted June 1, 2009 impressive job Being new to this hobby and don't want to buy any expensive tools at this early stage of experimentation. How can I remove the case back on a Rolex, Omega Planet Ocean using normal household DIY tools. Thanks for any comments/instructions P_Diddy Still waiting on any comments about upgrading this watch to a better movement. Anyone have any good franken mod suggestions for this project? Thanks! Link to comment Share on other sites More sharing options...
Toadtorrent Posted June 1, 2009 Report Share Posted June 1, 2009 How can I remove the case back on a Rolex, Omega Planet Ocean using normal household DIY tools. Ball of duct tape...balled up sticky rubber glove...snap ring pliers (carefully)...these all work. Link to comment Share on other sites More sharing options...
redwatch Posted June 5, 2009 Author Report Share Posted June 5, 2009 So after some research, it looks as though an A7750 would do the trick. The Miyota Quartz movement has one really obvious flaw. The running seconds are at 6 o'clock instead of 9. The 7750 looks like it might work, but I am wondering if the spacing on the dial will work out for a 7750. Any thoughts? Link to comment Share on other sites More sharing options...
redwatch Posted June 5, 2009 Author Report Share Posted June 5, 2009 One other thought. Are there any other members who have some Miyota OS10 movements lying around that are broken that I can take the broken date wheel gear assembly from? Offshore, I know that you mentioned you might have some but they have the same issues that mine has currently. Thanks! Link to comment Share on other sites More sharing options...
Logan Posted June 5, 2009 Report Share Posted June 5, 2009 Nice work so far, its the best way to learn trust me. (well at least the most fun..) A 7750 swap does come with some issues, eg does the stem line up, and are the dial holes correct for the movement. You can of course get genuine Omega dials and hands from Ofrei's but I'm not sure if the case you have is worth that. If the case is the same as the 7750 based rep then it might all fit together.. Link to comment Share on other sites More sharing options...
redwatch Posted June 11, 2009 Author Report Share Posted June 11, 2009 So I decided to go with the quartz movement for this watch. I definitely have the bug though, and now I am lusting after a new franken project. Just can't decide which one.......although the Tuder Sub is one sexy beast! I will post some pics once the SMP Chrono is assembled Link to comment Share on other sites More sharing options...
redwatch Posted June 12, 2009 Author Report Share Posted June 12, 2009 Watch Re-Assembly Complete!!!!! Thank you to everyone who periodically checked in on this thread and gave your support and encouragement!! Couldn't have finished it without you! And now some pics!!! And the wrist shot: Link to comment Share on other sites More sharing options...
offshore Posted June 12, 2009 Report Share Posted June 12, 2009 Good work rw! And nice job by the looks! O/S Link to comment Share on other sites More sharing options...
stolikat Posted June 12, 2009 Report Share Posted June 12, 2009 Cool thread and nice pics! Link to comment Share on other sites More sharing options...
redwatch Posted June 12, 2009 Author Report Share Posted June 12, 2009 Good work rw! And nice job by the looks! O/S Thanks offshore! Appreciate it! Also thanks to stolikat! I had a lot of fun on this one and learned a lot along the way. I hope that this inspires others to take on the challenge to repair their own watches. It is nerve racking, stressful, and at times very frustrating. However, once you complete the project, there is no better feeling of accomplishment!!! Link to comment Share on other sites More sharing options...
gazumi Posted June 12, 2009 Report Share Posted June 12, 2009 Congratulations on getting the watch back together. Great work! Link to comment Share on other sites More sharing options...
redwatch Posted June 12, 2009 Author Report Share Posted June 12, 2009 Congratulations on getting the watch back together. Great work! Thanks gazumi! Link to comment Share on other sites More sharing options...
jfreeman420 Posted June 13, 2009 Report Share Posted June 13, 2009 (edited) Excellent work. The last watch I tried to mod was rendered totaly useless. I ruined a perfectly good BCE just trying to install a diamond bezel. You shouldn't use a ball peen hammer to press on a bezel. Now I have limited myself to sizing bracelets. Edited June 13, 2009 by jfreeman420 Link to comment Share on other sites More sharing options...
redwatch Posted June 13, 2009 Author Report Share Posted June 13, 2009 J, Well, as I learned in this project, the right tools are the key to any succesful repair job. I of course learned that the hard way. By using the thumb tack to push the stem release, I inadvertantly created a whole new project for myself!!! However, I am very happy that I did that as I forced myself to learn more about watch repair and assembly. Of course, now I have the bug and I want more, more, more!!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now