Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

WM9 z-16610 SS


rosnik

Recommended Posts

I received it two days ago, by FedEx , after 32 long days of delivery time. :(

I replaced the delivered insert with Gen one ( not for necessity, but because I got one around ). :)

The bud thing of this WM9 is (BMW) the bracelet ;

if I get in paragon it, with the high quality of the watch, the bracelet is really poor and not 1:1 made.

It appare to be the same low quality bracelet delivered with SSD.

The good thinks instead are:

the Z-16610 it's really 1:1,

the glass retainer is exactly like Gen,

The rotating bezel and the rotating bazel system is like Gen,

the case is like Gen but accept 2836-2;

this WM9 SUB accept Gen crystal,

It accept Gen Insert too,

it has big crown tube lke Gen,

and the Case back is interchangeable with Gen one.

I hope you'll enjoy my low quality pictures.

cheers! :animal_rooster:

Nico

2000829005605203827_rs.jpg

2000887952408052704_rs.jpg

2000809317060225677_rs.jpg

2000832606177114497_rs.jpg

2002170612402489932_rs.jpg

2002794991228654623_rs.jpg

2000874714555897776_rs.jpg

2000835245953463944_rs.jpg

2000823289453568385_rs.jpg

2000039227571977473_rs.jpg

2000092081464131216_rs.jpg

2001067751193279135_rs.jpg

2005722355250066072_rs.jpg

that's the delivered insert , but I get Gen one.

2002138058739180225_rs.jpg

Link to comment
Share on other sites

so thats it then, this is the perfect sub,

its high price negated by the fact that, to bring an mbw to this level of modding would cost the same amount or more?

or...?

I'm modding one MBW to this level.

I'm spending quite double.

If you like I can post some pictures about................... :wub:

Link to comment
Share on other sites

I'm modding one MBW to this level.

I'm spending quite double.

If you like I can post some pictures about................... :wub:

sounds good, you're doing the mods yourself? brave man

subs were never really my thing, but when you have the mbw finished it will surpass the wm9 or each will have their merits and demerits?

Link to comment
Share on other sites

Thats a damm nice Submariner and it will beats the MBK in my opinion...

When it's really accept a Gen Crystal thats fantastic....

Also the Bezel construction looks like Gen to me...

Do you must shape the Gen Insert or will it fit with no modification...?

I think Tube and Crown will be the same than on the SSD...

Hope the other Dealers will have access to this nice watch....

But I stated in an other Thread a new MBW Submariner is in the piipeline....

I will post News when they are done...........

Link to comment
Share on other sites

Congrats for this amazing Sub rosnik!

You can never mod the MBW into this level, imho. This version has perfect crystal/rehaut merging. It's quite easy to spot from the TW and MBW. This is the only 16610 that really looks like the gen to me. I'm certain that nobody would ever spot the low crown position, unless the watches are side by side.

The pearl looks like utter shite though... and the Noob dial is better.

PS: This is not gospel, but just my 2 cents. ;)

Link to comment
Share on other sites

@ Tribal: No I do not shape the gen insert, it fit perfectly but I glued one bit for safety.

@By-tor : I'm in accord with you. It's impossible to update MBW to that point because the Crystal retaining system in MBW is only on pressure.

Here,

to get you idea I get some pictures of my working progress MBW modding:

Gen Crown

Gen TUBE

Gen Retaining bezel Ring

Gen Bezel ring

Gen insert

Ps: To get the gen. retaining bazrl ring I get on a lathe the case to leave out the edge around the glass support .

I then added space to the retaining bezel ring to fit on MBW case and glued it in place with the gen spring .

Wile all this work can not reach BMW the WM9 quality one!

In WM9 the retaining bezel ring, it'is really working to take the crystal in the correct and sealed position,

and under the retaining ring, on the WM9, like in Gen, is located one BIG o-ring too.

That's the starting MBW case:

2002494946494001913_rs.jpg

Gen tube and Gen crown:

2002483413168861719_rs.jpg

Retaining ring in position with the 'Clic' spring.

2002476791760393459_rs.jpg

2002414470456509168_rs.jpg

2002462770531105299_rs.jpg

That's the case finished.

I have not get the novement jet becouse I'm waiting for one Noob dial.

To see: the perfect crystal/rehaut merging

2002428325760468222_rs.jpg

2002496689124881153_rs.jpg

2002438771065089865_rs.jpg

2002408924001065440_rs.jpg

2003178872083322566_rs.jpg

2003110034854557672_rs.jpg

The bud thing for all this two watches is that the position of the steam is always not correct!

They use 2836-2 movement.

I think that to solve it, we have to pass to the 2892 or....................... to get Gen 3135. :D

Link to comment
Share on other sites

it's no doubt it has the best case. but like by-tor said the dial is not as good as the F520117's (aka noob's). Neither is the date font. The biggest problem I have with it (besides the high price which I think will eventually come down) is the bezel. Thanks rosnik for your clear pictures. It confirms that the bezel teeth are too slanted and look short. Good thing this sub has a gen bezel construction. I can get a gen bezel to put on it. But I can't justify the cost, given the watch is $655, a gen bezel is easily $300 or move. That's why I'm not pulling the trigger. I think my old-case MBW has much better bezel teeth. Here're a couple pics of it next to a gen:

frontal03.jpg

rehaut.jpg

frontal01.jpg

crystal02.jpg

-bk

Link to comment
Share on other sites

Are 3 days long that I'm using my MW9 . :balloon:

I can tell you that I was kindly impressed by the GEN feeling that this REp can get to the user.

To get one example:

Rotating the bezel the "Click Click" is like gen :) , nothing to get in paragon to the "ClanG ClanG" that my MBW did out of the box :bye2: .

Screwing the crown, it's gently braked by the big o-rings that get their works, that's like in my Gens. :cc_canadian:

Just to get you one paragon,

when I received the MBW (out of the box), I used it 5 minutes ...............and I decided to mod it.

This one, after 3 days, I feel it like "my Rep watch".

I'm in accord with you guys :cc_detective: that some particular have to be inproved in this WM9 too, but jet out of the box it's really good. :rolleyes:

Link to comment
Share on other sites

Are 3 days long that I'm using my MW9 . :balloon:

I can tell you that I was kindly impressed by the GEN feeling that this REp can get to the user.

To get one example:

Rotating the bezel the "Click Click" is like gen :) , nothing to get in paragon to the "ClanG ClanG" that my MBW did out of the box :bye2: .

Screwing the crown, it's gently braked by the big o-rings that get their works, that's like in my Gens. :cc_canadian:

Just to get you one paragon,

when I received the MBW (out of the box), I used it 5 minutes ...............and I decided to mod it.

This one, after 3 days, I feel it like "my Rep watch".

I'm in accord with you guys :cc_detective: that some particular have to be inproved in this WM9 too, but jet out of the box it's really good. :rolleyes:

Rosnik,

Nice review. I have the Z case WM9 TT Sub. The points you make are all accurate and I agree with your observations 100%

Especially your point that this watch "feels" most like Gen.

Pictures can not describe this quality that the other Rep subs do not have...

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up