-
Posts
13,070 -
Joined
-
Last visited
-
Days Won
12
Posts posted by FxrAndy
-
-
If you have an ETA style movement you will need new hands to fit to the 3804 movement
-
Have you tried to buy one?
-
Cousins UK normally has crowns and tubes
-
Hmmm interesting
-
Hi florian the only way of getting one if them is from a member as they sold out many years ago
-
Jake ref your first post I deleted it, if you want to deal here then you have to make the grade and that takes time and effort, not to mention trust on both sides and that has to be earned, any post that looks like it may be underhand dealing will be deleted immediately
-
Nope 2824 3035 3135 1570 Have a good look2824 and 3135 the same way except the 1570 and 3035 so a modern 3135 will turn the the same as a 2824Not true. A 2836-2/24 rotate the opposite of a 3135. A 3035 and eta will have the same hand rotations but not the same date rotation. -
Have you tried removing and refitting the stem?
-
No 3135s rotate the same as eta only the older movements rotate counter clockwise
-
Lots and lots
-
what rep movement? swiss movement? gen movement?
do you have a problem with the current movement?
-
We don't delete threads just because the poster may have been an idiot We leave then there for the education of all who choose to read them
- 2
-
Both would be reliable and both would not look gen with the case back off as neither are the original omega movement ( although it is based on the 2892) Have a read here if you want to know about how good a 2892 can be http://www.chronometrie.com/eta2892/eta2892.html
-
That one that came out is not an eta or any clone of an eta it is a variant of the Asian 21 j, so looks like you are slagging the Selitas for no reason
-
And the close op pics of the movement look good too, nice anglage on the corners of all the plates, the pearlage looks a bit rough compared to quality Swiss but that could also be caused by the plating process, The power reserve is great if it is 72 hours Just a shame that the p3000 is such a flat boring movement but still well done !
-
Oh bob that was dumb!!! Hope it does. It hurt too much but I bet you won't do it again
-
A 2824 would be a good movement and the gen dial, hands, date wheel should all fit
A 2892 would be even closer to gen though
-
Got more, that was the best part of my day
-
There are a couple of breitling rotors on eBay right now for €60 as well
-
Any 6.9.12 7750 will fit, you just need to get a new or serviced one, I have two sat in my spares box, a top grade longiens with full pearlage and a more standard Hamilton one if you are in the eu
-
Shame they can't fixed that little fault, but the bb is a lovely watch
-
I would love to be seeing all that world
-
Gruss aus NRW
-
Nice classic
My Christmas Presents have arrived!
in The Rolex Area
Posted
There is far more to the sky dweller than a simple 24hour wheel http://m.rolex.com/en/the-new-sky-dweller/