mellons

barcelona wrist-check!

This case set needs an aftermarket plexi!

new arrival- shots before disassembly and mods: river 6152 no cg on buhr

Very nice- movement is superb Great photos also!

dsn 6154 on buhr by the sea

some images on a sunny day on buhr strap: wristies

The research is half the fun!

Nice looking movement...

Super work steph! Seeing these makes me want to start another build...

Good informative post Gen buckles also were 1.5mm thick- most of the copies are 2mm Iir the genesis of the prev are modded verstions of he gen 26mm gpf buckle- they were sewn in but had the ends manually curved in to fit curvature of strap better. Elias and timeband do really accurate 2mm thick versions of these buckles at the moment- i have a few straps with these and compression-fit lug bars and you can really see why they were used for military timepieces!

Normal registered post

trying out destro...

saga's amazing lume pip mod!!!!

All i can say is i have seen the previous generation 312 and it looked great- this one the movement looks really good

Jackson tse has somilar for less

Looks good: would look great with midcase reshaped

finally got the best strap! as comfortable as leather but can be worn in water: mm on 22mm isofrane

Built as only nightwatch can do- superb

another mod here- patinated bronze bezel: this finish wears really well after a day or two patina lightens up on shaprp edges etc-

finally got build back together today big thanks to elias who tapped case for athaya tube and got micro-welding done, and also to necky for tidying up welds and re-drilling new lug holes work completed: existing lug holes micro-welded, new holes drilled and micro-welding additional material around crown tube. Case tapped and has athaya brevet crown and tube installed. I had tried a modded two-piece bezel along with a nightwatch slid thinner caseback- decided on keeping the stock (higher) one-piece bezel and thicker caseback and go for lower dome. Further modding required (more work to crown area + plexi to be lowered slightly). Build has southy gaposis + seagul 6497 from roland kemmner. More work to be done: shorten lug bars, lower plexi and more work to crown area. revised dimensions as follows: lug-to-lug 54.64mm (wider), 12mm from bottom of dsn caseback to top of bezel, 15.5mm overall height. Case shots: ] hanging shot modded crown area wristies beside river unmodded display-back 6154

Athaya still is around and active- he is a sponsor over on hf and still has ss cases afaik River also is still active and has 6154 case sets The other type (not posted) is oyang- these were cery limited and no longer available The reshped silix case set makes a nice 6154, silix called them 6154. They need a lot of work but can look relly good- nightwatch poated a great one

I wear on both to give to give wrist a rest If wearing in bed i change from one to the other Also with lawrger watches (fiddies etc) if a normal (non destro) model frequently i wear on right to keep crown from digging into wrist

just back from the works- i wanted to see how far this case would go (i.e. test to destruction): case is still around!!! microwelding of lug holes and additional material added around crown (crown tapped) - thanks elias new lug-holes drilles furrther along lugs and micro-welds cleaned up - thanks necky i await athaya crown to see how it looks/ how much i need to take back here are some shots of case as-is atm: comparo with river reshaped 6154 (better to come)