jasf2002

Its a great watch - Here is mine with a 'bit' of work

Highoe Is there anywhere you know does a decent aftermarket clasp I.e. With the straight aligned adjustment holes?

Yip and yip

Ah - did not realise that you got a dial so thats good. BTW just measured my Noob dial against the sub Supreme flat S dial and the Noob is 1mm smaller - mind you, who knows if all the Noob dials are the same!! Looks a very nice case to start from

Not saying it's different just that the case needs to be pretty cheap to as there are loads of parts needed to complete. Size wise - certainly on my sub supreme the dial is bigger than a noob dial - I.e. If you put the noob dial in the case you need to align it and the markers do not go right up to the rehaut. If this case is the same size then that is a consideration

Certainly gen like construction but need to try a gen sized insert in there. The case threads for the case back look badly done or is it the photo. Agree with highoeyazmuhudee that would need to see with a dial to gauge. Would also be useful to know if the crown tube will take a gen crown. Also it's just a case so need to find a movement ring, date wheel overlay, dial, hands and obviously a movement then stick it all together. The big issue there being a decent dial cause a noob will probably be a bit small. What was the cost of the sub case?

Hi - is the bezel construction like gen and the dimensions? + 1 care to share the dealer? They do look pretty good though

Sub Supreme from Precious Time would be my choice

I thought the 2846 is a slow beat 21000bph and the 2836 is a modern 28800bph

You are spot on!! As I said ... Always learning. Guess it's easy enough to say it's an aftermarket replacement but no doubt I'll spend some time trying to find or sort. Do any of the dealers do a correct clasp? Ta

Thanks for the comments Your watches are looking good - know what you mean though the vintage is a real classic design WM9 insert is Genuine, Fits perfectly on a WM9 so took the opportunity of getting one on the bay. Close up I have to say that the Watchmaterial pearl is very very close.. just a bit off white. A for the bracelet - Dremmel then various grades of sandpaper. I took it to polished and then used a scotchbrite pad to get an even brushed finish Ta

Hi Thought I would post a few pics of my two subs I first found this place in October last year and am fascinated by the amount of info that there is here - the how to topics and examples have been so helpful as before last October I had never taken the back of a watch. I started with couple of Timeshop Nooobmariners and they were really good - I think they gave me the bug as they were considerably better than I had expected. The problem with this forum though is that the more you read the more picky you get - Rehut depth, Crown size, Pearl etc etc all make you strive for a better 'look'. Up first is my Sub Supreme from PT - I think this is the same as the old WM9 V1 or BK's current Sub but don't really know. I got a non engraved rehaut version as I was a bit wary of alignment issues - the Noob's were poor and I ended up removing on them.... thats a long story on its own! I have done the following Mod's PT Sub Supreme: Noobmariner Bracelet Sub Supreme clasp Clark Crystal 2.5mm Rolex Gasket (BK recommends this in a post somewhere to go with Clark Crystal and get the right Crystal HeightGen InsertReplace All Crown Tube seals with new ones Crown Guards shaved (takes a lot of effort) Gen Crown - fits straight on Noobmariner Dial Next up is Josh's 5512 - I was inspired by another thread on this. Its a great case but guess the Crown Guards could be better but the overall construction is really good. I have not done ageing as I like it looking like it is - I intend to replace the dial with a 5513 and say its a Service replaced. Josh's 5512 Drilled out lug holes Rehaut needed a good bit of TLC Crown guard work New thick tube (did not use a gen as I think these are to wide for the low crown position - I installed a gasket between the tube and case just like gen)Gen Crown Sorted the clasp lock (removed the incorrect indents Gen Tropic 19 (that took a bit of searching) Gen Bezel Let me know what you guys think

There are two size's of T19 and I found that while both would fit my case well, only one would allow the retaining ring to fit over - 303mm rater than 305mm. Don't know if this is the same issue that you are having - got mine from Cousins UK http://www.cousinsuk.com/catalog/4/0/1957.aspx

Thanks guys, appreciate the info

Hi I have 5512 with the Asia 21j movement - when removing the second hand from the cannon pin it snapped and stuck in the hand. I have a spare Asia 21j movement and thought u could upgrade the hands. Does anyone know if ETA hands will fit this movement? and if so a good supplier e.g. Yuki? And if they don't fit on the Asia is there anywhere to get decent 5512 replacements for the Asia?

I had that issue - it's the washer / tension ring whatever you call it. I used some fine sand paper and sanded one side down - be careful and take it slowly as it's pretty thin. Mine now turns fine.

Understand - thanks for the info on that. New Pics look really great!

Frank Thanks this is a great review with lots of info. Can I ask you mentioned a few posts ago that "standard sub crown fits on the tube" but then I think you have changed the tube - was this to fit a smaller crown or did the gen crown not fit? If you did change the tube what did you use and was it a straight swap or a machining job?

Ok the watch material pearl insert arrived and with a bit of patient work making the whole in the bezel bigger - here is the result

Ok thanks tictoc21 I was not looking hard enough - the pearl at Watch material looks the business and I have ordered one up. The wanted $15 for shipping for the UK but were really good and reduced this to $5 which seems like a fair dael! I will let you know how i get on when received and fitted.

Thanks for the replies - looks like there are a few options: ofrie - however it looks like the dot that sits in the metal surround rather than the whole part, any one know if this is so? Yuki - this looks clear and i guess you put the lum inside to suit it again looks interesting as it seems to be the entire piece but is all acrylic rather than metal and the dot - guess there were different versions on gen's hence the wide variety. Also sure I have read somewhere that these are out of stock. I have ordered a full bezel from the bay (Luxury Deals Store - i'm not allowed to attach a link) it looks similar to the yuki offering i.e. all acrylic rather than having a metal surround like a gen 16610 - I attach a picture of what I mean by the metal surround

Hi folks looking for a bit of guidance. I got a Noobmariner from Timeshop and am really pleased. Yes it has flaws like the crown etc but you need to be really into watches to know these are flaws. My problem is that the bezel pearl including the metal surround has fallen out. Despite a lot of searching about I cannot find where to get a replacement part. As the pearl was a poor part of the rep I would like to replace with a better part. Can anyone recommend a supplier or do I just need to buy an entire replacement bezel and take the pearl out? Thanks for any help