Lovecraft

Ah, not so strange then. Glad to have contributed to the noobiness of the noob thread

Why is the red line visible on the back case of the last picture but not the picture before that? Am I missing something?

Looks great except for the pearl, like everyone else stated. I'd ask for a new. I like how the dial and leather bracelet makes it look so different from the B/W with SS bracelet.

Just got my QC pics, and rejected the watch right away. The pearl was way off. I did specify in the order and the mail correspondence that the pearl placement was the one single thing that needed to extra attention so I was a bit surprised to find it so very off center. Hopefully I will get a new set of QCs soon. Andrew has been nothing if not helpful, and I'm sure he can find a better bezel or watch for me.

Oh no! That's awful Think it would have worked with a real press or was it that it simply wouldn't fit with the gasket? You bought a case kit - including the actual case? Isn't that insanely expensive - like $1k or something?

I'm not the only one with small wrists then, although my 6,5" are smaller than yours. I'm 6 feet (184cm) so I think it's a bit thin - not to mention a bit unfair considering my father's wrists are twice as thick as mine. Either way I think I'm a bit limited when it comes to watches. The larger ones look ridiculous on my wrist. I once owned a gen Speedmaster reduced that looked fine on my wrist. Kinda regret selling it - I haven't seen any resonably priced in some time and the size was just right. So you are going to do the mod yourself? I've been thinking about it, but haven't decided yet. It's kind of fun with that sort of stuff, but I figure the tools alone costs way more than sending it away to someone experienced to do it for you, no?

Actually, it seems they don't want any emails. The only way to contact them is by phone or snail mail. As far as I can see they don't even want consumers - just businesses. I guess it makes sense, but it still sucks.

Yeah, I agree. I haven't decided for sure either. I just ordered one, so waiting for QC pics now. Speaking of parts - I can't imagine they have a crown for each and every model they make, do they? I was just wondering if it was possible to get a new crown for my 39mm Aqua Terra, even if they don't sell AT parts per say. Might be the same crown as another watch that they do sell parts to. Just don't know how to go about finding it out.

Thanks! Really great! Yeah, I've never experienced a web shop even remotely as bad as cousins uk. Thanks a lot for getting me the ref number! Also thanks for the tips in the post above, I'm leaning towards the white numerals right now and I can decide what to get as a gen.

So, I'm thinking about getting a PO as well. Everyone else got one, why not me? Right now I figure the best choices for my rather thin wrists would be the 42mm all black/white one: http://www.yourtrustytime.com/index.php?main_page=product_info&cPath=35_114&products_id=7063 or the black/white one with red numerals: http://www.yourtrustytime.com/index.php?main_page=product_info&cPath=35_114&products_id=7086 I figured I'd go with Andrew since I've ordered from him before and I've been more than happy with everything. As a matter of fact, I even found this forum through him. I researched rep watches by just using google and looking around, and finally I decided on Andrew and he had a link to this forum on his page. I will probably want to go franken with it sooner or later. As far as I gather from the earlier threads on this forum, this is the best out of the box model. Is it still the model to get if I'm going to change dial and hands? Bezel? As for now though, I'm thinking of keeping the rep bezel if it looks okay. How is the out of the box AR on this model? I like the one with red numerals slightly, slightly better. I was thinking of going with the all white/black rep since it's supposedly slightly more accurate, and then get the gen dial with red numerals. Thoughts? One problem though - all I could find at cousins UK was the all white/black one. http://www.cousinsuk.com/catalog/4/166/450.aspx So what should I look out for in the QC pictures? HE valve placement? Bezel pearl? Thanks guys!

I'm looking for a 42 for my girly wrists but if I saw one I'd probably would have bought it.

Great review! As I said before, I really like this watch and it's on my list. It's definitely beautiful. I don't know if I prefer automatic or manual. If you use just one watch all the time, automatic is more convenient, but if you change a lot it doesn't really matter.

I have 6,5" - but you are right, it looks great on you. I might actually give it a shot! So many watches, so few wrists... what to do

It's pristine imo! It looks really great! I've done business with Andrew as well, and I couldn't be happier with my experience.

They look awesome, Vandal! Makes me want a Panerai, even though they are too big for my girly wrists Have fun!

I'm thinking about getting a PO myself, how could I not after reading all the countless threads here... I really like the one with the red 6/9/12, although I might go for the one with white numerals and then get the gen dial with red numerals when I inevitably would want to start to franken my PO. Without knowing for sure, I'm guessing no-one will see the faint difference in hue unless you compare it next to a gen - I doubt it would be a problem. However, YOU would know and that's a different story

I've been lurking in this thread since joining. Congrats Vandal! I guess you can exhale now I hope you are going to be happy with your watches!

Thanks a ton! Great link!

Hey everyone! I'm looking to buy an easy movement to just mess around with and learn more before I open up my other watch. I don't mind if it's cheap or if it's without a watch case. What would be an easy and common movement to start out with? And where would I buy it? Thanks in advance

Update: I got the strap from TimePieceRepublic and I couldn't be happier. Great tip!

Wow, really nice work. I guess I'll have to keep my eyes open on ebay then.

I haven't found any within driving distance and I'm not too keen on sending €1000-2000 to somebody without seeing what I'm getting in return. The new ones with the teak dial sell for about €3000 here, which is a tad too expensive for me even if I do get the nice 8500 movement. I just wouldn't be comfortable wearing it though, because of the price. I guess there's always the quartz option, but I know I'd hate it It's good that I really like my rep AT. It got a handful of small things that irritate me, including the happy feet, but it's still a lovely rep imo.

I went with timepiecerepublic's straps. It's yet to arrive but seems promising. I took a bunch of photos, but with bad lighting (I'm at a cabin at the moment) and just my camera phone the results were anything but good. I'll post the two that were the "best" of the bunch. You are probably better off looking at the QC pics though, at http://imgur.com/a/DiA0r which are very similar to my watch. I like it a lot even if I'm not using it right now - it will have to wait a few weeks. If you were to franken it, what parts would you go for? I'm thinking dial, but apart from that?

I saw some of the newer ATs at Omega's site and thought they looked pretty great with their vertical lines on the dial. Does anyone have an idea if they might be showing up as reps anytime soon? The ATs aren't exactly as popular as the POs and they might not be replicated at all? I just recently bought an "older" AT - the one with blue hands - from Andrew. I'm much too happy with it right now to do anything with it, but would it be possible to franken it in the future? It looks close enough to be 1:1 to me, but the site says 39mm while I think the gen is 39,5mm. It would be a future project anyway, but would be nice to know if it's an option. http://www.yourtrustytime.com/index.php?main_page=product_info&cPath=35_66&products_id=1766 Lovecraft

Thank you! I would have preferred to have the omega logo on the clasp, but the straps and the clasps look really nice and I'll probably go for one of those! Thanks again!