olreon

hello, the strange thing is that it runs perfect for about 1 month and then it started stopping. so if the hairspring is bent then i should have the problem from first time winding and runing the movement! when i take a closer look at the balance, i see that the balance staff (the pin that goes into the balance [censored]) is moving from left to right when the balance is swinging, and the balance staff that comes into the movement plate is absolutely in correct position, no moving from left to right! hmmm! this starts getting realy strange... bet wishes olreon

thank you very much for the link. the explanantions are very good. best wishes tomi

@leitztozeiss do you also got problems with your 6497? it´s strange, it runs perfectly about 1 month and then it starts stopping . so, if i understood ziggy correctly it is a problem of the hairspring. but what is bent on the hairspring and where did it touch the balance [censored]. my english is not that good, what is the balance [censored], can someone show it to me on a pic? thanks! best wishes olreon

hello, i got a problem with my 6497 swiss swan neck movement. the balance stops swinging when i put the watch on my wrist. i took a closer look at the mobement and recognized that the balance when it is swinging also is moving up and down (see the pic). the movement works perfect for a month. i never dropped the watch or did hit something with the watch. what could this be? first of all could it be fixed? best wishes olreon

hello, i think if rep makers would produce a accurate eigiziano they also would sell it very well. i think that every pam rep collector wants to add the eigiziano to his collection, and also the gen pam collectors best wishes olreon

hello, @finepics i talked with jos about the eigiziano. he told me that rep makers are afraid of making watches that are bigger then 40-44mm. this one is a very nice pice, i got also a couple of pics, where the eigiziano is reassambled. so, if it would come to a run i could also help with pics. best wishes olreon

hello, of course, you have to grind down the hands! best wishes olreon

hello, no, it is a small pam. a 40mm chrono with el primero movement. looks like a pam072 with leather strap. best wishes olreon

@finepics, thanks a lot! best wishes olreon

.... and then you should make a nice review, with lots of pics. best wishes olreon

hello, count me in, for one more datwheel. so, i need 2 2892_A2 datewheels. best wishes olreon

@avitt what do you think is a adequate price for such a franken sea dweller? best wishes olreon

the bezel is totaly wrong, it´s a sub bezel.

for the pam183h, pam127 and pam212 it won´t work, for sure!!!!! best wishes olreon

hello, it´s a matt dial. thanks a lot! best wishes olreon

hello, i wanted to know if there is something that could be done to remove scatches from dials? thank you! best wishes olreon

hello, i have to say that on the last generation pam reps that i have bought from jos, the dial lume is very good! so, no upgrade needed....

hello, @torresp nice to see what you have made of my old sub lv! best wishes olreon

hello, @finepics very nice 004! which palp crown did you use for your pam004, the 2.1mm or the 2.2 or mybe of the earlier run the 2.0mm? best wishjes olreon

...or is it the one in the left down corner? best wishes olreon

@speedy1 which one of these 3 davidsen dials is the base for your work. i assume that it is the one in the middle? best wishes olreon

@finepics how did you got this nice thick crown guard for this pam? i was searching around the board but i was not able to find such one. best wishes olreon

hello, the white dial version is spelling tachymetre and the black dial version is spelling tachymeter, see at their homepage. www.panerai.com but maybe the white dial version on their homepage is the prototyope and the ones that go out for sale have the spelling tachymeter! best wishes olreon

hello, and now i´m totaly confused! which one is better, the 117 or the 581 cased fiddy? best wishes olreon