-
Posts
2,143 -
Joined
-
Last visited
-
Days Won
74
Posts posted by hologramet
-
-
Chillax a bit? Everyone can see your thread, bumping it every 12hs isn't going to increase your PM's.
Also.. Why is this in general discussion? Don't the same rules and good manner apply to you?
-
1
-
-
-
-
My JF bracelet also broke..
Trimmed a 12mm wide Aprox 1,6mm thick doubleflanged springbar and made it flqngeless with short (2mm) pins. Easy.... Very easy. Max 2 min work
-
36 minutes ago, Pombok said:
Hey holo, is this a double AR crystal? I like it without the cyclops, where did you get it?
Sent from my iPhone using TapatalkHi! Yup... I'm not a big fan of cyclops either. That one is from ProfSteve..
usilg@comcast.net
Aprox 200 USD w/ shipping.
-
1
-
-
7 minutes ago, themannier said:
Where is the chrystal ?
Exactly... ProfSteve knows his thing...
-
-
10 hours ago, themannier said:
Good luck mate !
Where does this bracelet came from ?
It's a mix of LF v2 116610 and JF v2 116610-bracelets!
-
-
Let's throw this daily beater-baby in too...
JF 116610 v2, SH3135 with gen mods, runs +5s/d (on purpouse) on winder being +0 to 1 s/d on wrist. Not temperature-compensated balance...
LF 3135 SELs + JF links & clasp
Noob v7 bezel insert
Prof 2xAR no-cyclops x-tal
Waiting on Gen dial & hands + gen datewheel
Tested to 10 bar w/ magnificent results.
-
Hi guys...
I was supposed to greet a client last week... Imagine mine and his surprise when a flying Rolex projectile is coming at him.
In short.. Something inside the SEL broke and the whole bracelet-watch combo left my wrist.
So now, I'm looking for a way to reattach the SEL back on the bracelet.
I'm guessing it's some sort of flange-less-springbar?
Any tips regarding the Rolex-original item number or a similar aftermarket product? The braclet is a JF 116610. Looks like this:
-----
Nevermind.. I took things in my own hands and made a little custom springbar from an existing one. Perfect fit.
holo - JF Bracelet
1 - 0
-
-
I'm looking for the Tudor Anthology
-
On 2017-04-15 at 8:49 PM, slay said:
I could be wrong, but I think it's because of the clearcoat that goes ontop of the dial. I've seen some gen gilt dials where there is more depth but also some with less or almost no depth.
Sent from my iPhone using TapatalkYou might be right!
However the "hole" in the dial in the right angle doesn't happen with these..
But we sure are nitpicky..
Aren't we?
-
That's old school "Platinum Paint Mod"
This is new school: For more info, check the RepGeek / Rolex-subforum. I haven't done it, nor am I the author. It looked, however, very-very promising.
Noob ceramic insert with platinum plating
As a sub rookie, I bought my first V6 sub no date last year. At that time, I was satisfied with the quality and wore it often. With a great opportunity, I’ve compared with gen hulk, I’ve found out most parts of this rep are good, but there are still many defects which can get some better works. The most obvious one I noticed is the color of numbers on the ceramic insert. The index digital color on gen is metal luster, but rep is too dark, moreover, the rep’s index digital’s surface is very rough compared to gen. Another tell is that the sharp edge on rep index, the edge on gen is chamfered and it looks very stereoscopic. So I was thinking about the way to get these better, after researching, I’ve found some experts who is able to mod index by liquid painting, but the edge is still too sharp not round. Last December, a bright idea occurred in my mind, why not try to do a REAL WORK which is plating platinum on the insert? Then here is my result.....
I collect some noob v7 inserts to test my idea. The plating material is 99.99% platinum and it would be coated on top of my inserts. After a few experiments, I got the best result. Some photos are taken to present as followings. As you can see, here are gen, my work and without modded insert (stock) under different light condition for comparison.
Gen Hulk say hi to everybody.
Comparison between gen, modded and V7 insert under sunlight
Modded insert on the top.
Gen / my modded insert / V7 stock insert.
Comparing to these 3 inserts, the index color on stock V7 insert is more grayish and it is a known issue that it is getting darker after several weeks usage. My work - platinum plated one is closed to gen (see the mark "50" and "20").
Since I don't have rep hulk, I put this green insert onto my sub no date, this index works for me except the dark green color lol......
Comparison under different light condition
These photos were taken under different light condition, the color is closed to gen after my platinum modification.
Under fluorescent light:
Under yellow light:
Both of color on the insert scale are closed to each other whichever different light was applied.
Marco view after mod
Before plating, the surface inside the groove is rough (more grain can be observed, please see the V7 stock). The platinum coated index looks much more smoothly and might even more better than gen? Will double confirm that.
Edge smoothing mod
During the mod process, I realized that the Noob ceramic is able to be machined, so some abrasive was applied to chamfer the edge. The smoothing test was tested on my rep GMT master II inserts and the result is brilliant. (the index color on this smoothed insert is incorrect, please ignore it.) -
What meds are you?
The bipolar disorder, is it type 1 or 2?
Regarding addiction, you have a huge predisposition due to your bipolar diagnosis, and you will be inclined wether you like it or not to alter your state of mind with behaviors and if that is too complicated with chemicals.
My tip to you, speaking from experience.
Don't try to drink less, ergo don't try to limit your consumption, cut it fully. And it will be hard, relapses are part of it.
If you need someone to speak with, send me a PM and I will do my best to aid you from both a professional and personal experience.
Admitting the problem and asking for help is the hardest obstacle. Congratulations! Now starts the rest of your life!
-
1
-
-
-
Creativity and trying new stuff and usually finding awesome solutions is why I consider RJ to be the best modder/builder doing it on a hobby basis.
Also, if he helps you with a build... Take it easy, remember that nothing worth anything here in life comes easy.
-
1
-
-
Nowadays... It doesn't take much to become an internet "hero". Just be annoying enough. And provide "knowledge", and the masses of uninformed "me too's" will follow.
-
-
Saw it on your instagram earlier... B-e-a-utiful!
-
1
-
-
15 minutes ago, jigelow said:
Change it to what, though? At that size, there probably isn't a non-cyclops alternative out there.
There's always an alternative somewhere...
Worst case scenario. Remove the cyclops, chemically remove the AR on inner part of the xtal.
-
Nicer lugs and overall shape, although 43mm here and there says nothing until I can see it on the wrist. The cyclops though... I would change that xtal ASAP if the overall fit was good and I liked it.
-
1
-
-
I thought the overlayed text from the previous scammers advert on the new one, being identical doesn't exactly in addition with the remaining factors, inspired a "not guilty until otherwise proven". The proof is above. Better proof than that.. Well sure. I'll take the Sub. Payment upon delivery. I don't even need it, but if that's what it takes to save a bargain seeker, sure.
Rolex 5513 with Pointed Crown Guards... Pics of during and after
in The Rolex Area
Posted
Awesome work... However? Not stock Cartel bezel right?