Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Sun-bleached look...


TeeJay

Recommended Posts

I was thinking about this photo Nanuq posted a while back, which showed how the lume had been bleached white by the sun, and the UV had also started to 'brown the dial'.

chocolate.jpg

When I tried aging my dial, I did so by baking it under the grill for 30 seconds, and achieved the following result...

DSCN1621.jpg

Obviously a bit too much browning on the dial, but also, the markers are similarly much darker. For my second attempt, I was planning on only baking the dial for 10-15 seconds, to get a less browned result on the dial, but, I'm thinking that the result of the indices would still be too dark, so I've had an idea, and wondered if anyone thought there was any validity to it...

Might precisely covering each hour marker with blutac protect it from the heat, while the dial is being baked?

Has anyone any other suggestions how I might be able to achieve a baking of the dial while protecting the markers to create that sun bleached look?

Link to comment
Share on other sites

If you're looking to replicate the look of Nanuq's DRSD, you have another problem aside from the indices. The dial text. Crisp white and pinky-red. Yours will turn as coffee-coloured as the unmasked indices have on your first attempt.

I don't think there's a solution to be honest - as for the indices alone, I doubt blu-tac would hold up to heat anyway even for a short period, it would probably liquify and mess up your dial.

You have to remember that it's not just the years of UV exposure that gives that 1665 that effect, it was specific to those Mk.II dials, the type of paint that was used and how it aged generally (same deal with the rare cream dial Explorer II), hence why it is now known as a "chocolate" dial.

Link to comment
Share on other sites

Looks like you like your dials "well done." Thanks for posting your methods. I'll be aging some pieces eventually and this will help. hopefully the experts will chime in with some great methodolgy.

I'm definitely a fan of the vintage look, much less low-key than modern box-fresh :)

All I did with the dial was stuck it under the grill for 30 seconds, nothing fancy :lol: I'm just wondering if something over the markers might protect them from the heat, so the dial surface cooks, but the markers don't... That said, thinking about it, if the base of the dial heats up, then that would heat the markers from underneath... I think the only way to find out for sure is to actually do it :lol:

What about placing it directly under a UV lamp in the back of a closet or garage?

Never done this, just brainstorming.

I think it might work, but, would the emissions of a UV lamp be concentrated enough? I don't want to have to leave it running for 20 years to get the look :lol:

If you're looking to replicate the look of Nanuq's DRSD, you have another problem aside from the indices. The dial text. Crisp white and pinky-red. Yours will turn as coffee-coloured as the unmasked indices have on your first attempt.

I don't think there's a solution to be honest - as for the indices alone, I doubt blu-tac would hold up to heat anyway even for a short period, it would probably liquify and mess up your dial.

You have to remember that it's not just the years of UV exposure that gives that 1665 that effect, it was specific to those Mk.II dials, the type of paint that was used and how it aged generally (same deal with the rare cream dial Explorer II), hence why it is now known as a "chocolate" dial.

That's some really interesting feedback, thanks :) You're absolutely right about the lettering as well, I think this might be an impossible idea... I have to admit, I've never tried heating blutac, I'd wondered if it might have baked hard, but thinking about it, you're probably right about it liquifying over the dial, and that's not really the result I had in mind :D That's interesting to know that it was specific paint involved in the process as well :)

Link to comment
Share on other sites

Only way I know of is to put the thing in a UV tester. We have one at work and I played around with a dial. It shoots concentrated UV at an object so that it simulates years of use but in a matter of days. Leave it in for 7 days and you have the same effect of IIRC, 25 years. Turned out ok. I'll try and do another one and show the results.

Link to comment
Share on other sites

Only way I know of is to put the thing in a UV tester. We have one at work and I played around with a dial. It shoots concentrated UV at an object so that it simulates years of use but in a matter of days. Leave it in for 7 days and you have the same effect of IIRC, 25 years. Turned out ok. I'll try and do another one and show the results.

Now that's a good idea :) Only problem is getting access to one :D

Link to comment
Share on other sites

"I think it might work, but, would the emissions of a UV lamp be concentrated enough? I don't want to have to leave it running for 20 years to get the look :lol:"

Not so, you'd have the inverse square law working for you.

Try JC Whitney.

http://www.jcwhitney.com/autoparts/Search?catalogId=10101&storeId=10101&sku=ZX473463&zmam=73771597&zmas=4&zmac=78&zmap=ZX473463

Link to comment
Share on other sites

"I think it might work, but, would the emissions of a UV lamp be concentrated enough? I don't want to have to leave it running for 20 years to get the look :lol:"

Not so, you'd have the inverse square law working for you.

Try JC Whitney.

http://www.jcwhitney.com/autoparts/Search?catalogId=10101&storeId=10101&sku=ZX473463&zmam=73771597&zmas=4&zmac=78&zmap=ZX473463

Fantastic, thanks for the link :good:

Link to comment
Share on other sites

Here is my attempt at the aged look.

DSC01429.jpg

very easy to do, in fact so stupidly easy.

I used a washable Crayola childrens dark brown felt marker and just coloured in the markers.

Used a Q-tip to smooth it out to the right patina-like hue. Best of all, it is washable in case you don't like the first try.

Interesting :) Out of curiosity, has that had any impact on the visibility of the lume?

Link to comment
Share on other sites

Well, the stock lume on it was pretty bad to begin with. Just half an hour ago I put the watch under a flourescent light for about 20 seconds and shut out the light and in a darkened room, the lume glowed just as bright. The half life of the stock lume is probably around 10 mins. or so. I wasn't expecting huge lume on this model anyways.

I figure it the stock lume on a watch is pretty good to begin with, the crayola felt marker wouldn't make any appreciable difference.

The only thing with this method is that you can't really do the dial. I tried using the felt marker over the dial as well; it just have it a shiny glossy wet look. So I just washed it off and did the lume markers and the minute markers and the lettering as well. Oh yeah, the hands too.

Link to comment
Share on other sites

Well, the stock lume on it was pretty bad to begin with. Just half an hour ago I put the watch under a flourescent light for about 20 seconds and shut out the light and in a darkened room, the lume glowed just as bright. The half life of the stock lume is probably around 10 mins. or so. I wasn't expecting huge lume on this model anyways.

I figure it the stock lume on a watch is pretty good to begin with, the crayola felt marker wouldn't make any appreciable difference.

The only thing with this method is that you can't really do the dial. I tried using the felt marker over the dial as well; it just have it a shiny glossy wet look. So I just washed it off and did the lume markers and the minute markers and the lettering as well. Oh yeah, the hands too.

That's cool that it doesn't affect the lume :) I just had the crazy idea of using a butane lighter to selectively heat certain areas of the dial (avoiding the text and indices) to try and get the brown look :) I'll have to wait till I get more parts to try it, but given that it's heat (as was the case with the baking under the grill) I'm wondering if it might work :)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up