artoero Posted March 20, 2006 Report Share Posted March 20, 2006 (edited) Hello guys (and girls?) I have only rep.panerais with swiss movements, now I like the new 024 but its only available with a asian automatic movement. What I want to know is the liability of the movement, and if it is worth to buy it? Who can give me a proper advice? greetz Artoero Edited March 20, 2006 by artoero Link to comment Share on other sites More sharing options...
new & improved osteopath Posted March 20, 2006 Report Share Posted March 20, 2006 When the Asian 7750 movement was reviewed, quite extensively by The Zigmeister, he found that the chronograph portion of the movement was the unreliable part, and that the regular timekeeping portion of the watch was fine and would remain reliable if the chronos were not utilized. If we assume that this is the case, the watches that use this movement without implementing the chrono functions should, in theory at least, be fine. I will be ordering a sub in the next few weeks- have not decided which yet. -O Link to comment Share on other sites More sharing options...
artoero Posted March 20, 2006 Author Report Share Posted March 20, 2006 When the Asian 7750 movement was reviewed, quite extensively by The Zigmeister, he found that the chronograph portion of the movement was the unreliable part, and that the regular timekeeping portion of the watch was fine and would remain reliable if the chronos were not utilized. If we assume that this is the case, the watches that use this movement without implementing the chrono functions should, in theory at least, be fine. I will be ordering a sub in the next few weeks- have not decided which yet. -O I just ordered the new pam 24, EL as dealer(first time) I'll show foto's when it is in ok? greetz artoero Link to comment Share on other sites More sharing options...
Richard Tracy Posted March 20, 2006 Report Share Posted March 20, 2006 It was my memory that The Zigmeister, who owns and uses his 7750 chrono several times per day in his work, said that the chronos were not the issue, but that some of these early pieces were dirty, un-lubricated, and just not well put together, while some, like his worked fine, besides a hand, he had to glue into place. However now that the new 7750b1 were out, as long as your small seconds subdial is at 9 then your only concern, is lubrication. Link to comment Share on other sites More sharing options...
new & improved osteopath Posted March 20, 2006 Report Share Posted March 20, 2006 My concerns about the 7750's chronos referred specifically to the initial batch (which wound up in 196s etc...) and if I understand correctly, it is this 1st gen movement which found its way into the pam50 reps. Without the chronos, they should pose no problems. -O Link to comment Share on other sites More sharing options...
Richard Tracy Posted March 20, 2006 Report Share Posted March 20, 2006 It's also the first generation that I was referring to, which The Zigmeister owns and uses daily. The chronos are not the potential problem, but the movement itself. You can find all this info at TRC in the The Zigmeister libraries... Link to comment Share on other sites More sharing options...
new & improved osteopath Posted March 20, 2006 Report Share Posted March 20, 2006 The reset mechanism on the chronos notoriously was unable to find zero, and the hand was frequently loose on the pinion which made matters worse. The chrono engagement is a lever type, not a column wheel, and the lever frequently got hung up, making it impossible to stop the chronos at times. The Zigmeister and I had a back and forth about this when the 196 first came out. The new ones appear to be mostly bulletproof as the Swiss. -O Link to comment Share on other sites More sharing options...
artoero Posted March 21, 2006 Author Report Share Posted March 21, 2006 The reset mechanism on the chronos notoriously was unable to find zero, and the hand was frequently loose on the pinion which made matters worse. The chrono engagement is a lever type, not a column wheel, and the lever frequently got hung up, making it impossible to stop the chronos at times. The Zigmeister and I had a back and forth about this when the 196 first came out. The new ones appear to be mostly bulletproof as the Swiss. -O Thanks friends, I am a newbe, some things I do not understand jet, but is it right that in the new 24, it is a fine movement to use? thanks for patience Link to comment Share on other sites More sharing options...
dadog13 Posted March 21, 2006 Report Share Posted March 21, 2006 i also think that the movement is pretty reliable...i have a 196 for a couple of months and it works great... so, no fear...your new watch should have a just fine movement.. Link to comment Share on other sites More sharing options...
artoero Posted March 21, 2006 Author Report Share Posted March 21, 2006 i also think that the movement is pretty reliable...i have a 196 for a couple of months and it works great... so, no fear...your new watch should have a just fine movement.. Thank, I will let you know my experience artoero Link to comment Share on other sites More sharing options...
Rolexman Posted March 21, 2006 Report Share Posted March 21, 2006 If you are used to the Swiss ETA movements you will be disappointed by the Asian ones. Fact. But it doesn't matter because you can easily sell it with a couple of bucks profit @ marktplaats ....... My signature says it all! Link to comment Share on other sites More sharing options...
ravishingrick Posted March 21, 2006 Report Share Posted March 21, 2006 Donot know about the reliabilty but I have read that the movement comes unoiled... Do not know how long an unoiled movement shall last... Link to comment Share on other sites More sharing options...
Finepics Posted March 21, 2006 Report Share Posted March 21, 2006 And of course you could always upgrade it to a Swiss 7750 Link to comment Share on other sites More sharing options...
Rolexman Posted March 21, 2006 Report Share Posted March 21, 2006 (edited) And of course you could always upgrade it to a Swiss 7750 Sure... pay a couple of hundred bucks for a Swiss ETA and only use the second hand chrono @ 9 Investment of the year... Edited March 21, 2006 by Rolexman Link to comment Share on other sites More sharing options...
subzero1 Posted March 21, 2006 Report Share Posted March 21, 2006 From the way I read The Zigmeister's review, I think the chrono's are fine. The problems he alluded to were in the context of the Rolex Daytona and all the extra gears that were needed on this specific model to move the running seconds from 9 o'clock postion to the 6 o'clock position. If this is not done (ie, you are getting something other than a Daytona), then the chrono's work great and are not a problem. Link to comment Share on other sites More sharing options...
Richard Tracy Posted March 21, 2006 Report Share Posted March 21, 2006 Donot know about the reliabilty but I have read that the movement comes unoiled... Do not know how long an unoiled movement shall last... That's why you get it lubricated, then you come out way ahead of the cost of ETA, which in my opinion is way over-rated when compared to today's top Asian movements. Rolexman... The swiss have been using China to assemble their watches for years.. do you think that the Chinese have yet to figure out how to put together a decent watch on their own ? They even build Tourbillions now in reps.. EL has one.. Do you know how Amazing that is ? ! Tourbillions are on the most expensive watches in the world ! Though I do prefer ETA in some instances.. I don't feel locked in to always spring for ETA in every circumstance. After all, these are still reps we are speaking of here, not to mention that variety, is the spice of this game, which spending less per watch = more watches. Link to comment Share on other sites More sharing options...
Rolexman Posted March 21, 2006 Report Share Posted March 21, 2006 (edited) do you think that the Chinese have yet to figure out how to put together a decent watch on their own ? Yep, great quality from China! That's why my Nikes are so durable... I can wear them for years Edited March 21, 2006 by Rolexman Link to comment Share on other sites More sharing options...
swdivad Posted March 21, 2006 Report Share Posted March 21, 2006 I've got an IWC GST chrono with the new asian 7750, and from the outside, ie watching the chrono hand move around the dial and listening to the movement, it is superb. Running @ +3 seconds/day right now and have the chrono running all the time. The only thing I've noticed is that the minute counter (12:00) jumps forward at about the 58 second mark instead of at 0 Link to comment Share on other sites More sharing options...
Richard Tracy Posted March 21, 2006 Report Share Posted March 21, 2006 Yep, great quality from China! That's why my Nikes are so durable... I can wear them for years That's what they used to say about "Made in Japan"... Which brings up another point,..Asian movements also include Japanese in some of our reps... Keep spending more my friend,.. I would love to see that Kodak moment when you discover that your cherished piece turns out to contain what you were running from all this time.. or worse yet it fails regardless.. Priceless... Link to comment Share on other sites More sharing options...
Rolexman Posted March 22, 2006 Report Share Posted March 22, 2006 (edited) Don't worry... I was wearing reps when you were still sucking on yo mommas titty. Edited March 22, 2006 by Rolexman Link to comment Share on other sites More sharing options...
Richard Tracy Posted March 22, 2006 Report Share Posted March 22, 2006 Don't worry... I was wearing reps when you were still sucking on yo mommas titty. You mean your momma's ! There you go,... off on another ass-uming trip again... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now