Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

How To Remove Links On An Iwc Gst


Pugwash

Recommended Posts

Seeing as this watch seems to be getting a resurgence in popularity, I decided to prepare this for all the new owners. This article can also be found at http://pugwash.cat5.org/articles/gst/

You will need specialist tools for this task! Yes, that's right, you need two toothpicks or similar. I'll wait while you go get them.

:Jumpy:

Look at the inside of that superbly designed bracelet. Best in the watch game, in my opinion.

106762-24836.jpg

Press a toothpick into one of the dimples, forcing the spring down.

106762-24837.jpg

Push the second toothpick into one of the side holes ...

106762-24838.jpg

... which forces the pin out.

106762-24839.jpg

You should be able to pull it out by hand, but if not, toilet paper wrapped round the pin and gripped with pliers does the job without scarring the pin.

106762-24840.jpg

Pin removed.

106762-24841.jpg

Repeat this on an adjacent link and remove it.

106762-24842.jpg

To put the strap back together, push the button in and slide the pin into place.

106762-24843.jpg

This is now complete. You've removed a link.

106762-24844.jpg

One of the links is one-and-a-half links long, for fine-tuning the size to your wrist. Remember to check the fitting throughout the day as your wrist can expand as the day goes on, so don't have it very, very tight in the morning.

You may notice that my watch is weathered; This can be buffed out very easily, but I prefer the character, to be honest. Titanium is gorgeous.

Link to comment
Share on other sites

An excellent tutorial Pugs.

"Explanations should be as simple as possible, but no simpler." - Albert Einstein

Thanks for that, I appreciate it.

I'm waiting for the first person to post "Oh, that's how you do it. I've been using a hammer and pin ..."

Link to comment
Share on other sites

Thanks for that, I appreciate it.

I'm waiting for the first person to post "Oh, that's how you do it. I've been using a hammer and pin ..."

hi pugwash

i'm just about to pull the trigger on one of these bad boys :Jumpy:

just a quick few q's.

how wide is the strap?

do you have a wristshot photo as i don't want the 40mm to look too small?

cheers dude.

Link to comment
Share on other sites

Excellent tutorial... and definitely needed as this watch seems to have exceptional resizing method.

I'm not a huge fan of titanium but the GST Ti is a great looker. Still... the white one with gold hands is my favourite GST. Maybe I'll get one eventually (if a good deal comes up).

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...
Please Sign In or Sign Up