tr4driver Posted October 25, 2009 Report Share Posted October 25, 2009 I think I may have taken them down a little too far. Link to comment Share on other sites More sharing options...
lanikai Posted October 25, 2009 Report Share Posted October 25, 2009 here's one that Ziggy did for me.. the CG's are out of fucus .. I was shooting the silver dw.. but you can make out the dimensions.. regardless .... you did it yourself..congrats.. AC Lanii Link to comment Share on other sites More sharing options...
tr4driver Posted October 25, 2009 Author Report Share Posted October 25, 2009 here's one that The Zigmeister did for me.. the CG's are out of fucus .. I was shooting the silver dw.. but you can make out the dimensions.. regardless .... you did it yourself..congrats.. Yep. Took about 10 minutes with a Dremel and small paper sanding disk. I didn't even remove the crown - just kept the paper side of the disk against the crown. I ended up taking them down more than I intended. Easy to do with the Dremel. I'll be more conservative next time. Link to comment Share on other sites More sharing options...
Guest HaloArchive Posted October 25, 2009 Report Share Posted October 25, 2009 If you make the crown lumpy, it will look just like old rolexe's did... all different Link to comment Share on other sites More sharing options...
ShawnBeever Posted October 25, 2009 Report Share Posted October 25, 2009 The outsides look ok. The insides look a bit rough though the horn should meet the body of the watch with a nice sharp corner and not a soft radius like you have. You can sort this out with a nice sharp triangular file. You will have to remove the crown though. Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted October 25, 2009 Report Share Posted October 25, 2009 Wrong angle, dont use a dremel as it removes material too quickly for this job. A file and some sand paper albeit tidious is a better arsenal Link to comment Share on other sites More sharing options...
kbh Posted October 25, 2009 Report Share Posted October 25, 2009 Here's a gen: Here's mine. Still need to square off the inside corners a bit but I think I got the outside thickness about right: Link to comment Share on other sites More sharing options...
tr4driver Posted October 25, 2009 Author Report Share Posted October 25, 2009 Yeah... I think I went too far with mine. I smoothed them up a little and will just leave them as is. Next time I go a little slower. Link to comment Share on other sites More sharing options...
freddy333 Posted October 25, 2009 Report Share Posted October 25, 2009 You should use hand tools to do the shaping & leave the Dremel for the polishing. Link to comment Share on other sites More sharing options...
Demsey Posted October 26, 2009 Report Share Posted October 26, 2009 Look at the bright side; there were people who paid a premium for 'serviced, water-proofed, and crown guard shaped by Swiss trained techs "perfect Submariners" that were hacked A LOT worse than that. They also leaked in the shower. Some of them. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now