WM9 V2 SUB insert

[Cats]

I tried to help a friend of mine by sanding down his insert for the WM9 he bought from Presious TIme.

I think i sanded it down a little too much.

Now i'm looking for a new one but i don't feel shure which one to buy.

I measured the outside diameter of the insert ( by measuring the inside of the bezel ) and i need a 37,7mm insert.

All the suppliers don't give the measurements of the inserts so i don't want to buy one in the blind.

I read about wholesaleoutlet and jewelryoutlet but do they sell the right diameter ?

Which type does the insert for this sub have originally and which source do you guys advise.

If talked to him about a gen insert but he doesn't want to spent that much on a insert.

Thanks in advance

Carpe Diem

Cats

[tomhorn]

Contact BK. I'm sure he can hook you up with a replacement.

[alligoat]

WM9 inserts are the same dimensions as the gen- 37.6 OD and 30.6 ID. The BK formula is to buy the jewelryoutlet555 insert (Rolex Part # 315-16800) and put the watchmaterial.com pearl in there. Good insert for under $30. Other places also sell decent inserts- you can look on ebay.

[Cats]

Thanks guys

So the rolex part #315-168000 is the correct one.

Carpe Diem

Cats

[alligoat]

Yes, the bezel assembly for the 16800 and 16610 are the same. Since the movements are different (3035 vs 3135), the cases are different- rehaut on the 16800 is shallower than the 16610.