ubiquitous Posted March 14, 2006 Report Share Posted March 14, 2006 Had some free time today, so I spent a few minutes putting my DateJust frankenstein together. Still ironing out some issues with the watch; the movement needs to be serviced, and I need a new stem for it as well. But for now, here's what I've got: *Genuine 16234 DateJust case *Genuine dial *Genuine WG fluted bezel *Genuine crystal *Genuine tube *Genuine 6mm crown (needs to be replaced) *ETA 2836-2 *Datewheel overlay *Tudor Oyster Prince hands *Aftermarket Jubilee bracelet/endlinks *Replica clasp :comp2: Here's what I started with- $400 worth of parts: Add a run of the mill 2836: And you get this: Cheers, Randy Quote Link to comment Share on other sites More sharing options...
Watchmeister Posted March 17, 2006 Report Share Posted March 17, 2006 Nice to be here. Quote Link to comment Share on other sites More sharing options...
marrickvilleboy Posted March 17, 2006 Report Share Posted March 17, 2006 heyy nice work!! Quote Link to comment Share on other sites More sharing options...
rolexlover Posted March 17, 2006 Report Share Posted March 17, 2006 Very nice work and pictures. Does the genuine dial feet fit the 2836? I guess you have to cut them and glue the dial ??? Quote Link to comment Share on other sites More sharing options...
ubiquitous Posted March 18, 2006 Author Report Share Posted March 18, 2006 W, and Ruo- Thanks much Very nice work and pictures. Does the genuine dial feet fit the 2836? I guess you have to cut them and glue the dial ??? Thank you, thank you! With regards to fitting the genuine dial- The dial feet do need to be trimmed off, and the dial itself is then fixed to the movement ring (I use a very small amount of adhesive to do this). As of late, I've encountered some issues with this watch- I'm going to need to pull it apart to try to figure out what's going on Quote Link to comment Share on other sites More sharing options...
ehtolcad Posted March 18, 2006 Report Share Posted March 18, 2006 said it before at the old place, but i'm really glad to see the pics up again Quote Link to comment Share on other sites More sharing options...
Hattori Honzo Posted March 20, 2006 Report Share Posted March 20, 2006 by looking at the thumb in the pics...is ubi rbj's lost twin? Quote Link to comment Share on other sites More sharing options...
ubiquitous Posted March 20, 2006 Author Report Share Posted March 20, 2006 Hey now, my thumb my be torn up, but it's not that jacked! Quote Link to comment Share on other sites More sharing options...
the collector Posted March 20, 2006 Report Share Posted March 20, 2006 smoking Quote Link to comment Share on other sites More sharing options...
t Posted March 21, 2006 Report Share Posted March 21, 2006 where you find date wheel??? standard eta datewheels not fit Quote Link to comment Share on other sites More sharing options...
tallguy83 Posted March 21, 2006 Report Share Posted March 21, 2006 Very nice. The parts only ran you $400? Quote Link to comment Share on other sites More sharing options...
ubiquitous Posted March 21, 2006 Author Report Share Posted March 21, 2006 Tallguy- The case, bezel, tube, crown, crystal and dial were $400. The movement, bracelet, hands and other misc. parts were in addition to that cost. Quote Link to comment Share on other sites More sharing options...
vmena Posted August 30, 2007 Report Share Posted August 30, 2007 Ubi... you said you used an ETA 2824 in this post: ETA2824 Are these different watches? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.