rek001 Posted January 14, 2010 Report Share Posted January 14, 2010 Hi all, I just picked up a 2008 Cerachrome Sub from prowatch-polo. Absolutely gorgeous watch and some of the most careful packaging I've ever come across. I will do a full review of dealer and watch soon (am VERY impressed with Mr. Polo!) Anyway I have a 6.5" wrist so 3-4 links have to come out. One screw is stuck, frozen in the link, what can I do about it? I really need to get it out to remove link, or the bracelet will be too big. I doused it in Liquid Wrench, a penetrating oil, letting it sit right now. Is there any good technique for removing frozen screws or am I "screwed" so to speak? I truly appreciate any advice given. Link to comment Share on other sites More sharing options...
lanikai Posted January 14, 2010 Report Share Posted January 14, 2010 R.. if you can remove the link before this one.. I have plenty of spare sub links I can send.. sounds like the threads were forced in on that particular one.. just know that I have spares; if you need to completely replace one side I may have something to send you.. Link to comment Share on other sites More sharing options...
Demsey Posted January 14, 2010 Report Share Posted January 14, 2010 I think you're doing all you can do rek, the Liquid Wrench.............a trick mechanics use to unfreeze stubborn bolts is to *tap* the head of the screw/bolt to 'wake it up', that may give the penetrating oil a chance to, uh, penetrate deeper. Maybe put the link up on it's side, put your driver in the slot an give it a good tap, let the oil soak over night, and then give it a go. Even if you get it out, the screw head or the link may be stripped and not be able to be used. Good luck! Link to comment Share on other sites More sharing options...
deltatahoe Posted January 14, 2010 Report Share Posted January 14, 2010 occaisionally when i have a screw that is stuck if i can manage to use a toothpick (or something similar) to push from the bottom while unscrewing the screw from the top, that will help. good luck deltatahoe Link to comment Share on other sites More sharing options...
krpster Posted January 15, 2010 Report Share Posted January 15, 2010 Worst case you could always throw some heat at the link. Ideally expanding it ever so slightly to loosen up the screw. However, be cautious how you apply the heat especially since it has been soaking up some chemicals Link to comment Share on other sites More sharing options...
rek001 Posted January 15, 2010 Author Report Share Posted January 15, 2010 Thanks for replies, guys. I'm going to give the screw head a tap as Dems suggested, you know, show it who's boss and soak the links in Liquid Wrench overnight. And Lani, what can I say, you are one of the most generous people I've run across ever. I'll let you know is I need those links. Mahalo x100. Wish me luck guys, I wanna wear it this weekend and do my review too. Let you know how it goes. Link to comment Share on other sites More sharing options...
jmb Posted January 15, 2010 Report Share Posted January 15, 2010 +1 on the heat. Maybe use a soldering iron, torch would be kind of overkill! ;-) Link to comment Share on other sites More sharing options...
LeSentier Posted August 20, 2010 Report Share Posted August 20, 2010 (edited) Hi,what about your screw issue? Did it finaly work, and how? best, J Edited August 20, 2010 by joerg Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now