Gorilladame Posted June 18, 2010 Report Share Posted June 18, 2010 Hi! Fooling around with my yuki Today, I tried to fit a spacer in (again) but with fitted spacer the thingi in the middle which holds the hour hand is too Short :-(( and so I have to unmount the spacer. Does anyone know which middle thingi ( hourwheel I guess) I need to have it long enough, and where to get it? I guess at Ofrei, but I can not find anything in this shop, it is very confusing... Quote Link to comment Share on other sites More sharing options...
omgiv Posted June 19, 2010 Report Share Posted June 19, 2010 If you replace the hour wheel, you may also run into problems wen fitting the minute and second hand. Jules Borel lists 6 different heights for the hour wheel (1.01, 1.26, 1.51, 1.76, 2.00, 2.26), 2 for the cannon pinion (1.95, 2.20), and 6 for the fourth wheel (4.15, 5.05, 5.30, 5.55, 5.80, 6.05). If you can measure the height of the hour wheel, we may be able to tell you what you need. Quote Link to comment Share on other sites More sharing options...
stilty Posted June 19, 2010 Report Share Posted June 19, 2010 You'll need a set of H.4. HW 1.76 CP 2.70 4w 5.57 I'm assuming the 2824-2 is going into a 1680 case? Quote Link to comment Share on other sites More sharing options...
mjmj Posted June 19, 2010 Report Share Posted June 19, 2010 Are Yuki not selling the ETA adaptors with a Hand adaptor? When they first listed these adaptors they have the hand adaptors too. Does anyone know anything about these? Thanks Quote Link to comment Share on other sites More sharing options...
Gorilladame Posted June 19, 2010 Author Report Share Posted June 19, 2010 You'll need a set of H.4. HW 1.76 CP 2.70 4w 5.57 I'm assuming the 2824-2 is going into a 1680 case? Right it is for the 1680, still not using your spacer because of that, it is a shame :-( So do you Know where to get a H.4.? Thanks to all!! Quote Link to comment Share on other sites More sharing options...
Ephry73 Posted January 6, 2014 Report Share Posted January 6, 2014 Bump for those looking for parts E Quote Link to comment Share on other sites More sharing options...
mymanmatt Posted January 6, 2014 Report Share Posted January 6, 2014 I don't know which hands you are using, sub, dj,etc. If you are using datejust I have long post hands that will solve your problem Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.