what2 Posted December 12, 2010 Report Share Posted December 12, 2010 I"m thinking the answer might be no, if so is there another easier to find family of eta movements that use the same hand size? Yukiwath for instance sells a dial and hand set for 2784, dial I am not worried about with glue... hands though might be a problem. Link to comment Share on other sites More sharing options...
FxrAndy Posted December 12, 2010 Report Share Posted December 12, 2010 yes they will fit Link to comment Share on other sites More sharing options...
marc jacobs Posted December 13, 2010 Report Share Posted December 13, 2010 2784 and 2824 hand set is same Link to comment Share on other sites More sharing options...
Mapman57 Posted December 13, 2010 Report Share Posted December 13, 2010 Slightly off piste but.... Will eta 2893-2 GMT hand set fit a eta 2836-2 GMT movement? Link to comment Share on other sites More sharing options...
FxrAndy Posted December 13, 2010 Report Share Posted December 13, 2010 I dont think the GMT hand will, i think off the top of my head the GMT on a 2893-2 is 1.80mm and the GMT hands we find on our 2836s are 2.00mm Link to comment Share on other sites More sharing options...
JoeyB Posted December 13, 2010 Report Share Posted December 13, 2010 Slightly off piste but.... Will eta 2893-2 GMT hand set fit a eta 2836-2 GMT movement? The hour, minute and second hand will fit. The GMT/4th hand might fit, but usually does not fit. The ETA and Asian 2836-2 GMT movements are modified by our Chinese friends and usually use a larger cannon pinion, but they have varied by the factory. The ETA 2893-2 GMT/4th hand measures 1.80. Measure your 2836-2, it is likely 2.0. I only know of one person who was able to successfully turn down the pinion to make it fit. I haven't tried yet. Link to comment Share on other sites More sharing options...
Mapman57 Posted December 13, 2010 Report Share Posted December 13, 2010 Thanks guys, I certainly will not be trying to do that! When its stripped down I will try to measure and advise. Anyone know of a supply of a 4 set of eta 2836-2 GMT hands for a 1675 or 16750 build? Link to comment Share on other sites More sharing options...
btocamelo Posted December 13, 2010 Report Share Posted December 13, 2010 someone with a good staking tool set, patience and knowledge could probably do it....I have seen it done on PAM 29 they have swapped the 2836-2 for a 2893-2 movement....so it is possible but it has to be someone that is precise and clean.....so not to mangle the GMT hand The hour, minute and second hand will fit. The GMT/4th hand might fit, but usually does not fit. The ETA and Asian 2836-2 GMT movements are modified by our Chinese friends and usually use a larger cannon pinion, but they have varied by the factory. The ETA 2893-2 GMT/4th hand measures 1.80. Measure your 2836-2, it is likely 2.0. I only know of one person who was able to successfully turn down the pinion to make it fit. I haven't tried yet. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now