omgiv Posted March 7, 2011 Report Share Posted March 7, 2011 Hi Guys, I got this dial a few months a ago from David and it was supposed to fit a V72, but the dial feet were in the wrong place. David just said to keep the dial. I was thinking about trying it out since I like the dial but don't know what it fits. The dial feet look to be at 5 and 35. I tried in on an Alpha movement that I believe is a Sea-Gull ST19 and it didn't fit. I have an Asian 7750 but remember what it came out of. I am thinking it came out of a Panerai Daylight with the tri compax layout. It wouldn't fit on that movement either. Does anyone have any ideas? Thanks!!!! Link to comment Share on other sites More sharing options...
Ronin Posted March 7, 2011 Report Share Posted March 7, 2011 I wouldn't get to hung up on the dial feet. If the subdial spacing fits V72, then just cut them off and use dial dots. Otherwise, we need more information. Dial diameter, measurement from center to subdial positions, etc. The only other movement that springs to mind, (and the diameter/feet might tell) is this is for Lemania Handwind. Link to comment Share on other sites More sharing options...
Justasgood Posted March 7, 2011 Report Share Posted March 7, 2011 Check out the big brain on Ronin Link to comment Share on other sites More sharing options...
omgiv Posted March 7, 2011 Author Report Share Posted March 7, 2011 Thanks guys. I am not sure that the subdials line up with the V72. I would probably want this one to be a budget version anyway. I took some measurements of the dial and the diameter is about 29.09mm and the subdials about about 7.5mm from the center. Thanks again!!!! Link to comment Share on other sites More sharing options...
Ephry73 Posted September 18, 2011 Report Share Posted September 18, 2011 Did the subdials fit the ST19 movement? I need a dial for a Daytona project(have two currently and this dial looks interesting. E Link to comment Share on other sites More sharing options...
lhooq Posted September 18, 2011 Report Share Posted September 18, 2011 omgiv: Just eyeballing it, but I'm pretty sure it's spaced for a V23 or V72. I think someone just screwed up with the feet placement during the production of the dial. Link to comment Share on other sites More sharing options...
Akira Posted September 18, 2011 Report Share Posted September 18, 2011 +1 on LHOOQ Subdial layout says V23 or V72 And since DW sells mostly factory rejected parts it wouldn't surprise me if this was just a miss-production Anyways it looks pretty good and I would just cut off the feet. Link to comment Share on other sites More sharing options...
Ephry73 Posted September 18, 2011 Report Share Posted September 18, 2011 Feet can always be dealt with E Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now