catboy Posted May 9, 2011 Report Share Posted May 9, 2011 As above really.. always fancied a 6263 or similar daytona, but never quite saved enough for one of spins fabulous creations. received an email from trustytime this weekend with details of their new 6263 rep which now has correct asymetric pushers, 1:1 case, interchangeable with gen components, etc., etc.. Do any of the resident experts have any views or info on these pieces vs. gen? i prefer the second and third (white/black, or black respectively) versions at the following link.. trusty time 6263 daytonas look forward to your insights! Link to comment Share on other sites More sharing options...
cousin_hub Posted May 9, 2011 Report Share Posted May 9, 2011 And have you seen the new 6238 of Josh ? 6238 choices Link to comment Share on other sites More sharing options...
lhooq Posted May 9, 2011 Report Share Posted May 9, 2011 There was a discussion on Josh's new 6263s in this thread. As for the 6238s: Josh really doesn't do himself any favors with his terrible photos! The silver dial looks like a greenish-tinged white. If it's anything like the earlier version, it should be a rather nice silver sunburst and one of the better 6238 dials available anywhere (including Phong). It's curious, though, that the dial is indistinguishable from the earlier 7750 version. The subdials are still too big, and pushed all the way out to the minute track. However, the biggest negatives for me are the fat subdial hands, which look utterly out-of-place with the rest of the watch. Also, I would try to change the bezel, and swap in a lower crystal. If it really is gen-sized, that should be an easy task. Beyond that, the case is a bit pointier and more square-shouldered than a 6238 should be, but that's obviously because it's carried over from the 6263s. Ditto for the big counterbores* around the pushers. Despite all that, I think the silver chronograph is pretty nice, and undoubtedly looks better in the metal than in Josh's listing. Check out this old 7750 6238 that was modded by pbdad last year. *I didn't know what a counterbore was until I learned it from jmb last week! Link to comment Share on other sites More sharing options...
cousin_hub Posted May 12, 2011 Report Share Posted May 12, 2011 Ok thanks for you response. When you look this gen the black version doesn't look so bad : Black 6238 Link to comment Share on other sites More sharing options...
Shadow_ Posted May 22, 2011 Report Share Posted May 22, 2011 As for the 6238s: Josh really doesn't do himself any favors with his terrible photos! The silver dial looks like a greenish-tinged white. so is this a silver dial one? i was searchin for a seagull engined 6238 with silver dial but i just couldn't found it... if not i am about to pull the trigger on the blue tachi one... Link to comment Share on other sites More sharing options...
lhooq Posted May 22, 2011 Report Share Posted May 22, 2011 so is this a silver dial one? This one. The description says white, but if it's like the old model, then the dial should be a silver sunburst. Link to comment Share on other sites More sharing options...
Shadow_ Posted May 23, 2011 Report Share Posted May 23, 2011 Thanks! I'll probably enquire josh about it.... a question about josh' st-19, the site says that the needle @ 6 (chrono hour hand) is fixed permanently but a watchmaker, that has seen this movement many times, told me that is not fixed but is it in synchrony with the main hour hand and it runs. i hope it isn't so. Link to comment Share on other sites More sharing options...
prdubis Posted May 23, 2011 Report Share Posted May 23, 2011 On the Daytona, it is frozen. But on the Speedmaster, it runs with the hour hand... Sent from my GT-P1000 using Tapatalk Link to comment Share on other sites More sharing options...
Shadow_ Posted May 24, 2011 Report Share Posted May 24, 2011 This one. The description says white, but if it's like the old model, then the dial should be a silver sunburst. i have enquired josh about it and he told me that it is absolutely a white dial one daaamn i'll never find a silver dial seagull pretona Link to comment Share on other sites More sharing options...
lhooq Posted May 24, 2011 Report Share Posted May 24, 2011 Well, that's unfortunate. Especially since there weren't any all-white 6238s. Link to comment Share on other sites More sharing options...
Shadow_ Posted May 24, 2011 Report Share Posted May 24, 2011 yep i have compared many and many gen dials with their seagull reps and the best choice for a seagull "pre" remains http://www.1-pc8838.com/0rldv00111-6238-ssss-whiteblue-asian-venus-p-10050.html but from that crappy pics i can't see if it has a good rehaut or a conical one... The black one isn't bad also, but it is a 100k+ $ watch... Link to comment Share on other sites More sharing options...
lhooq Posted May 24, 2011 Report Share Posted May 24, 2011 There was a black 6238 dial on eBay a few months ago that was practically NOS. $30,000 dial for a $268 rep? Rehaut looks OK to me in those pictures, and in the shots I've seen in buyer reviews. (ugoderosa wrote about his 6263 PN on RG.) I would try to source skinnier subdial hands, though. Link to comment Share on other sites More sharing options...
Shadow_ Posted May 24, 2011 Report Share Posted May 24, 2011 yep i searched subdial hands too but i found nothing... maybe there is something from dw but i don't know if they are good for a seagull... i asked a watchmaker too but it doesn't even know how to source them... :| btw is there any source dealing the silver dial with the manual 7750 slim case? does spinmaster do? or yuki? i didn't remember... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now