prdubis Posted June 5, 2011 Report Share Posted June 5, 2011 Hi mates, I need your help about a DSSD I own and barely wear...I think I bought it from Josh, but which version is it? Any better/updated version released since? Thank you for your help! Link to comment Share on other sites More sharing options...
Jkay Posted June 5, 2011 Report Share Posted June 5, 2011 This is a v3 noobfactory dssd produced during the "bad 10" era, two years ago. The bezel insert was replaced with a TrevorTime "correct 10" insert and sold from the dealer as new with the modified insert, to correct the factory's mistake. The Noobfactory has progressed 3 versions beyond this in two years. The newest has thinner more correct hour markers, and a nicer insert triangle and pearl. It really is a pretty watch. If I didn't have a The Zigmeister-fied eurotimez dssd, I would sell it on and get the newest iteration for myself. Link to comment Share on other sites More sharing options...
Jkay Posted June 5, 2011 Report Share Posted June 5, 2011 Was this watch re-lumed? The hours markers are quite good. Too good for a v3, but why else would here be a eurotimez/TrevorTime insert on a noobfactory case set? Hm! Link to comment Share on other sites More sharing options...
prdubis Posted June 5, 2011 Author Report Share Posted June 5, 2011 Thanks for your science! No, it hasnt been relumed, I got it like this directly from Perfect Clones/Josh. Do you think it would be a good idea to get the newest version? Is it a real enhancement? Thank you again! Sent from my GT-P1000 using Tapatalk Link to comment Share on other sites More sharing options...
ocram Posted June 5, 2011 Report Share Posted June 5, 2011 A very, very bad version I'd give it away for a few $$ to a member called etto09 Sent from my iPhone Link to comment Share on other sites More sharing options...
prdubis Posted June 5, 2011 Author Report Share Posted June 5, 2011 Haha :-) sorry for these questions, I haven't followed the evolution of this rep! Sent from my GT-P1000 using Tapatalk Link to comment Share on other sites More sharing options...
Jkay Posted June 5, 2011 Report Share Posted June 5, 2011 (edited) Thanks for your science! No, it hasnt been relumed, I got it like this directly from Perfect Clones/Josh. Do you think it would be a good idea to get the newest version? Is it a real enhancement? If you can find a current Noobfactory bezel insert, and have it fitted, then you will have a watch as good as the current model. Your dial markers look great, and it puzzles me why a noob case set has a TrevorTime insert and a really good looking dial. This should not exist. The only reason a factory Cartel dssd should have a Trevor bezel insert is if it is an older v3. This is to fix the "bad 10" problem from 18 month ago. BUT the v3 dial markers are terrible looking, and yours look very gen-like. And your case set is definitely cartel (noobfactory) ... So a mystery. Acquire a current cartel insert with dome pearl and you are good! Edited June 5, 2011 by Jkay Link to comment Share on other sites More sharing options...
JimmyGee Posted August 24, 2011 Report Share Posted August 24, 2011 If you can find a current Noobfactory bezel insert, and have it fitted, then you will have a watch as good as the current model. Your dial markers look great, and it puzzles me why a noob case set has a TrevorTime insert and a really good looking dial. This should not exist. The only reason a factory Cartel dssd should have a Trevor bezel insert is if it is an older v3. This is to fix the "bad 10" problem from 18 month ago. BUT the v3 dial markers are terrible looking, and yours look very gen-like. And your case set is definitely cartel (noobfactory) ... So a mystery. Acquire a current cartel insert with dome pearl and you are good! I have a $88 Replica Make (not being sold any more which is a pity.) best bracelet yet, but not being a Rolex man for long, the rest looks good to me, and I can't tell of any flaws, except for the ceramic bezel that has too thin markings. When you talk "insert" what is this, please? Also where can I buy a current cartel insert with dome pearl, please. Link to comment Share on other sites More sharing options...
pr0digy30 Posted August 25, 2011 Report Share Posted August 25, 2011 (edited) I don't think this was a V3. If it was the dial was also replaced..., as the V3 dial just sort of has a curved indent around the date window. This one is clearly bevelled (how well it's bevelled is left to opinion however). EDIT: I've been trying to source a replacement recent V? insert but without luck. Think it's the old "no parts, must buy watch" line. Edited August 25, 2011 by pr0digy30 Link to comment Share on other sites More sharing options...
Jkay Posted August 25, 2011 Report Share Posted August 25, 2011 yes exactly. This watch is a puzzle, as I mentioned. It has a noobfactory style case, a trevortime bezel insert and the best dial I have ever seen. This photo is of the best rep DSSD I have ever seen. All it needs is a slightly better pearl and a slightly more curved white triangle in the insert. if this watch had a modern noob bezel insert it would be awesome indeed. Link to comment Share on other sites More sharing options...
prdubis Posted August 25, 2011 Author Report Share Posted August 25, 2011 Hi mates I have gotten a noob insert last month, not yet installed... Will post pics of it soon for appreciation. The pearl is different. About the dial, do you think it would be interesting to send it to The Zigmeister for a relume? --- I am here: http://maps.google.com/maps?ll=43.382372,-1.654833 Link to comment Share on other sites More sharing options...
Jkay Posted August 25, 2011 Report Share Posted August 25, 2011 If you are sure you like the size and look of the DeepSea then send it to him with the extra insert and have him lume it and install the insert while it's there. You'll have one hell of a watch. If he re-lumes the insert pearl to match, ask him to replicate the clear pearl dome as well when he's finished. Link to comment Share on other sites More sharing options...
prdubis Posted December 4, 2011 Author Report Share Posted December 4, 2011 Hi mates, I finally shot some pics of the new insert, it is supposed to come from Noob factory... I am about to send these to The Zigmeister for relume, which one is the best? Do I keep the one on my watch, or have it replaced? Thanks for your help! Link to comment Share on other sites More sharing options...
irolexu Posted December 4, 2011 Report Share Posted December 4, 2011 The pearl seems a little better and the numbers look a bit whiter i would install the insert you have there Link to comment Share on other sites More sharing options...
chiman12 Posted December 4, 2011 Report Share Posted December 4, 2011 (edited) If you take a look at a gen bezel insert in real life, the insert fonts are white-ash (slight hint of grey/silver) colour and very thick and bold as compared to the cartel offerings... I've probably bought 5 (maybe more!) different versions of th DSSD from V2 onwards and all cartel bezel inserts are incorrect as the fonts and the markers are not thick enough. IMO...the first bezel insert looks like it has stronger markers and fonts (engraving is deeper), but the "4" in the 40 is slightly incorrect. I would personally keep the current one and do a paint mod on it. Edited December 4, 2011 by ChiMan12 Link to comment Share on other sites More sharing options...
prdubis Posted December 4, 2011 Author Report Share Posted December 4, 2011 Wow that's not easy to choose! Link to comment Share on other sites More sharing options...
prdubis Posted December 4, 2011 Author Report Share Posted December 4, 2011 You're right, the first bezel has deeper engravings but fonts are bolder on the second. I will ask The Zigmeister to relume the pearl too. The second bezel is totally clear, and has a fatter metal surround. I really don't know which one is better :-( Link to comment Share on other sites More sharing options...
Jkay Posted December 6, 2011 Report Share Posted December 6, 2011 Both of the inserts you are showing are TrevorTime inserts. Neither one is from the Noobfactory. If you look at any Noobfactory DSSD, you will see that the top of the insert triangle is very curved. You were sent the wrong piece. Your triangle is perfectly straight. Link to comment Share on other sites More sharing options...
prdubis Posted December 6, 2011 Author Report Share Posted December 6, 2011 :-( Thank you mate for your help! So I will keep looking for a Noobfactory insert!And what about the aftermarket insert sold on eBay? Link to comment Share on other sites More sharing options...
TeeJay Posted December 6, 2011 Report Share Posted December 6, 2011 Thanks for your science! No, it hasnt been relumed, I got it like this directly from Perfect Clones/Josh. Do you think it would be a good idea to get the newest version? Is it a real enhancement? Thank you again! Sent from my GT-P1000 using Tapatalk IMHO, I would say 'No'... Regardless of the changes made to more recent generations, if you don't wear your current DSSD much, I doubt that you would wear another one much either, regardless of variations in the generations May not have been the answer you wanted to hear, but just my .2c Link to comment Share on other sites More sharing options...
prdubis Posted December 6, 2011 Author Report Share Posted December 6, 2011 Thank you for your point of view TJ! Actually I don't wear it often as I have plenty of watches, both gen and rep, but I do like it! :-) I am not aware of updates made to this watch by rep factories, but it seems mine is not so bad! :-) Link to comment Share on other sites More sharing options...
TeeJay Posted December 6, 2011 Report Share Posted December 6, 2011 Thank you for your point of view TJ! Actually I don't wear it often as I have plenty of watches, both gen and rep, but I do like it! :-) I am not aware of updates made to this watch by rep factories, but it seems mine is not so bad! :-) No worries, just trying to save your wallet the 'upgrade price', which I suspect would still not be often worn, so very quickly become a buyer's remorse, as it would 'still be' a DSSD... It sounds like it is the model of watch which is not earning wrist time, rather than actually having something 'wrong' with it with regards the details/flaws ratio... I would suggest taking the money you'd allocated to spend on an upgraded DSSD, and treat yourself to a different watch with said cash instead [Edit to add] It's a bit like I am often tempted by the fantasy Deep GMT, but, I know that I don't like how the case looks on my wrist anyway, as it is the same as the DSSD, and my beef with it is not the name on the dial or the function, but the 20mm bracelet, on a case which really needs a 22mm bracelet, such as the Tudor Heritage has Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now