kinglazy Posted June 17, 2011 Report Share Posted June 17, 2011 Hi There! I just received my PAM359 few days ago from Puretime! I wound it initially about 30 times to get it going, everything was running fine, I was wearing it and it was keeping good time. ABout 1 and a half days later, it ran out of juice while I was wearing, as if the rotor is not winding it. SO I wound it up again, reset the time, and same thing happened again today while wearing. It seems to function more like a mechanical watch rather than an automatic! Anybody have this issue with this movement? (Asian 7750 automatic movement at 28800vph with pltinum plated rotor) Any Advice?? Please help!! Thanks Link to comment Share on other sites More sharing options...
bummerh12 Posted June 17, 2011 Report Share Posted June 17, 2011 I received my 359 from Puretime 3 days ago. Working perfectly. Perhaps u can email nikki about the issue. Link to comment Share on other sites More sharing options...
kinglazy Posted June 17, 2011 Author Report Share Posted June 17, 2011 Glad to know yours is working perfectly. Mine seems to be operating like a self winding rather than an automatic! Link to comment Share on other sites More sharing options...
richard lawton Posted June 17, 2011 Report Share Posted June 17, 2011 Hi, Please check the auto rotor bearing, I had a problem with mine it was very loose and the rotor was catching in the bridge and not winding. I contacted Pure time and sent a photo of the problem and they sent me a new bearing, which I installed and now everything is fine. Maybe yours has this problem. Regards Richard Link to comment Share on other sites More sharing options...
kinglazy Posted June 17, 2011 Author Report Share Posted June 17, 2011 Hi Richard, The rotor seems to be winding ok. I don't see any wobble, and it rotates very easily. Any other way for me to check? I can't and don't have any expertise or tools to open the caseback btw. How did you find out that yours was loose and not winding correctly? Thanks for sharing with pics. Regards Link to comment Share on other sites More sharing options...
richard lawton Posted June 17, 2011 Report Share Posted June 17, 2011 Hi, I had the same problem as you low power reserve. When I rotated the watch slowly I could hear the slight friction of the rotor, only slight, but enough to stop winding the watch sufficiently when being worn. If this is not your problem then you may need to get it serviced, or send it back for replacement. Regards Richard Link to comment Share on other sites More sharing options...
Rolexman Posted June 18, 2011 Report Share Posted June 18, 2011 Could be a defective reversing wheel. Let a watchmaker lookt at it. Probably a small fix. Link to comment Share on other sites More sharing options...
dutchguy2 Posted June 18, 2011 Report Share Posted June 18, 2011 Could be a defective reversing wheel. Let a watchmaker lookt at it. Probably a small fix. +1 I had the same with my gen 24B once. Link to comment Share on other sites More sharing options...
kinglazy Posted June 19, 2011 Author Report Share Posted June 19, 2011 Thanks all for the feedback! Here's the funny thing, today the watch died for the 3rd time. I shook the watch and moved the rotor, the seconds hand started moving, so it is winding the watch. SO I can't figure out why it stops after every 40 hours or so when I'm wearing it daily. Planning to send it back to Angus! Link to comment Share on other sites More sharing options...
Ddc Posted June 19, 2011 Report Share Posted June 19, 2011 Hi all, this is a great community and a great forum, and this is my first posti!! So here it is: I had the same problem and the fix is actually quite simple but requires a little skill. The rotor while it spins, "it Winds The watch" but it does it while it spins in one direction only. When the rotor spins in the other direction, the bearings allow it but the gear it winds is actually "parked" in place. The problem with MY watch was that the "parking break" was not engaging so when the rotor was winding in one direcion, it was unwinding the mechanism in the other. The solution is to bend the break a little to make it engage the gear properly. I did it and now i have a 2 day power reserve... When you remove the rotor you will clearly see the gear the rotor spins, and you will see a spy hole showing a tiny metal "needle" that is supposed to press against it. That needle is supposed to allow the gear to spin in only one direction. You'll get it when you see it. Bend it a little and it will be fixed.. I also added a little grease to the bearings of the rotor to add a little bit of drag which is good... Hope this helps... Link to comment Share on other sites More sharing options...
kingkaiser Posted June 19, 2011 Report Share Posted June 19, 2011 I have the exact same problem. I have to wind my 359 to get it running. unfortunately, I know nothing about watch mechanisms, so would be very hesitant to use Ddc's suggestion :S If it helps, mine is VERY reluctant to rotate clockwise (if the watchback is facing me), but rotates freely counterclockwise. Not sure if you have the same issue, or even if thats normal! Link to comment Share on other sites More sharing options...
Rolexman Posted June 19, 2011 Report Share Posted June 19, 2011 Thanks all for the feedback! Here's the funny thing, today the watch died for the 3rd time. I shook the watch and moved the rotor, the seconds hand started moving, so it is winding the watch. SO I can't figure out why it stops after every 40 hours or so when I'm wearing it daily. Planning to send it back to Angus! There's nothing to figure out. The answer has been given! You go ahead and send it back to China, less risky and a lot cheaper than letting your local watchmith look at it and fix it in 2 minutes The logic of some people... Link to comment Share on other sites More sharing options...
kinglazy Posted June 23, 2011 Author Report Share Posted June 23, 2011 Thanks all for the feedback! Watch is on it's way back to Angus! There's quite a number of members having problems with this 359 movement! Hopefully it will be a permanent fix this time and no more surprises! Will keep you all posted if anything! Cheers! Link to comment Share on other sites More sharing options...
kinglazy Posted July 9, 2011 Author Report Share Posted July 9, 2011 Just wanted to update, watch is back from Angus. Pretty fast in my opinion. Thanks Angus!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now