brokenblinker Posted January 4, 2012 Report Share Posted January 4, 2012 I ordered a Speedmaster rep from Mary about 3 months ago. Upon receiving it, one of the pushers promptly broke off and she had me send back the watch head. Well I received my new one last night. I set it before going to bed, and it lost 5 minutes over night. I'm not familiar with how to regulate the ST-19 movement. Anyone have any tips or tricks on regulating it or have suggestions? I really don't want to pay to ship it back to China for a SECOND time. Link to comment Share on other sites More sharing options...
Jkay Posted January 4, 2012 Report Share Posted January 4, 2012 You don't have to ship a watch for being un-regulated .. besides, the rough treatment by the postal services can throw it out of regulation so there would be no point to do this. If you lost 5 minutes overnight, I assume it will lose 15 minutes a day, so the watch is probably out of beat and needs to be on a time-o-graph machine for proper alignment. Where are you in the World? Link to comment Share on other sites More sharing options...
brokenblinker Posted January 4, 2012 Author Report Share Posted January 4, 2012 (edited) I'm on the west coast. Bay area. I wouldn't mind trying to regulate it myself either, I'd just need help with regards to which lever is regulation and which is isosynchocy. Also, with which direction to nudge said lever. Edited January 4, 2012 by brokenblinker Link to comment Share on other sites More sharing options...
Jkay Posted January 4, 2012 Report Share Posted January 4, 2012 The lever with the large gold screw is the very very rough adjustment, and it will actually prevent the watch from running if moved too far in either direction. The lever with two gold pins is for fine adjustments. If you have an iphone or an ipad with a decent plug-in mic, you can purchase the App called "Kello" which is a Jr. time-o-graph Link to comment Share on other sites More sharing options...
brokenblinker Posted January 5, 2012 Author Report Share Posted January 5, 2012 Well, went to wind it for the second time and when I unscrewed the crown, the stem was snapped. Looks like this one is going back too. I'm starting to get quite frustrated. Link to comment Share on other sites More sharing options...
chum_2000_uk Posted January 5, 2012 Report Share Posted January 5, 2012 That sucks... rotten luck man. Hope Mary sorts it out promptly for you. Link to comment Share on other sites More sharing options...
brokenblinker Posted January 5, 2012 Author Report Share Posted January 5, 2012 Still waiting to hear back from her. Maybe she'll let me get a UPO or something next. I'm starting to sour on this Speedy that keeps breaking instantly when I get it. Also, I have 8 other watches. While I'm new to the rep scene, I'm not new to the watch game. I know I'm not doing anything to abuse/break them. Link to comment Share on other sites More sharing options...
dcam207 Posted January 5, 2012 Report Share Posted January 5, 2012 Well, went to wind it for the second time and when I unscrewed the crown, the stem was snapped. Looks like this one is going back too. I'm starting to get quite frustrated. It was snapped when you went to wind it for the SECOND time? A moonwatch style speedmaster with a screw down crown? is the rep that far off spec? Link to comment Share on other sites More sharing options...
Jkay Posted January 5, 2012 Report Share Posted January 5, 2012 Why don't you just send it to be repaired. The cost of tracked shipment to China TWO times?? Get it regulated and a new stem and forget about a 2nd trip to China. Link to comment Share on other sites More sharing options...
brokenblinker Posted January 5, 2012 Author Report Share Posted January 5, 2012 It was snapped when you went to wind it for the SECOND time? A moonwatch style speedmaster with a screw down crown? is the rep that far off spec? Yup! It was there the first time. When I unscrewed it to wind for the second time, it just fell out when I undid the threads. And yes, despite being the best moonie rep, they are that far off. Would definitely be willing to exchange for something else...getting fed up with this thing. Link to comment Share on other sites More sharing options...
maxman Posted January 5, 2012 Report Share Posted January 5, 2012 Man that sucks...do you know of a decent watch shop In your area that might take a look at It.? This could save you some furture headaches. But If you just want to send it back I understand. Good luck. Mike Link to comment Share on other sites More sharing options...
superlative Posted January 6, 2012 Report Share Posted January 6, 2012 Mary doesn't QA her watches. I hope you get the problem resolved. Link to comment Share on other sites More sharing options...
Jkay Posted January 6, 2012 Report Share Posted January 6, 2012 Mary doesn't QA her watches. I hope you get the problem resolved. Mary is one of the original "personal shopper" type dealers, who goes out and hand-picks watches for you from the watch bazaar. To call her a drop-shipper is the height of absurdity. She pioneered "QC photos" back when a cartel dealer would tell you to drop dead if you asked for a picture. Really now; come on. Link to comment Share on other sites More sharing options...
Ephry73 Posted January 6, 2012 Report Share Posted January 6, 2012 How much did you pay for the watch? The easiest and simples solution is to have the stem replaced by one of the local guys. The speedie looks good. Full size? Link to comment Share on other sites More sharing options...
superlative Posted January 6, 2012 Report Share Posted January 6, 2012 I never said she was a drop-shipper. Yes, she goes out and finds the watches, but she does little to test them out before shipping them. Mary is one of the original "personal shopper" type dealers, who goes out and hand-picks watches for you from the watch bazaar. To call her a drop-shipper is the height of absurdity. She pioneered "QC photos" back when a cartel dealer would tell you to drop dead if you asked for a picture. Really now; come on. Link to comment Share on other sites More sharing options...
Jkay Posted January 7, 2012 Report Share Posted January 7, 2012 She has posted images of her test bench, with commercial multi-hook winder for running a watch a couple days before shipment. She's also posted that she has a watchsmith on-premises. http://www.rwg.cc/to...h-international Im curious how you think any dealer could QC a watch so it does not physically break in the future. The most important thing here is that a trusted dealer will offer to take it back and repair it. Unfortunately it is customary to foot the shipment bill yourself. Oftentimes it is best to have the piece serviced in your own country and call it a day. Link to comment Share on other sites More sharing options...
mikellem Posted January 7, 2012 Report Share Posted January 7, 2012 i agree with Jkay, Mary did pioneer the photos and went way beyond what the cartel dealers did at the time. i am sure she looked at your watch before shipping. There is only so much time and effort anyone can put into a rep before shipping. Your problem happened after you received the watch from Mary. I would think she will let you change models, because that's just not how it works. i would agree with the rest of the guys that you should save the shipping and the downtime, and find or get a referral of a rep friendly watch repair. I feel bad for you..There is nothing like a 2 time problem,, and them the seller is overseas... Good Luck on which ever way you choose to go... I say fix it here. If you do that, she most likely will take money off your nest purchase. MM Link to comment Share on other sites More sharing options...
brokenblinker Posted January 7, 2012 Author Report Share Posted January 7, 2012 Well, I found someone in LA to look at it, I'm on the west coast near san jose. He charges 20, so I think I'll just ship it there. Might also have him take a look at making it non threaded crown. Link to comment Share on other sites More sharing options...
Ephry73 Posted January 7, 2012 Report Share Posted January 7, 2012 I would keep the crown threaded for added safety E Link to comment Share on other sites More sharing options...
brokenblinker Posted January 7, 2012 Author Report Share Posted January 7, 2012 The problem is that a rep with manual wind threaded crown means you're threading and unthreading that thing constantly. I think it will strip soon if the quality of the rest of it is any indication. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now