gmtlover Posted January 31, 2012 Report Share Posted January 31, 2012 Hi guys, I know that there are a few great modders on this forum, and I've seen some great mods I am especially interested in learning to lume. Does one of you know were I can find a great DIY lume tutorial. With tips and tricks on how to get those sharp edges for instance, or what the best way is to remove old lume. How to get the right color. etc etc. I know it takes a lot of practice patience and probably up to a great to be able to do a good lume job on a watch, but that does not scare me off. So all experienced lumers please chime in and share your knowledge. Thanks! Link to comment Share on other sites More sharing options...
ttony0992 Posted January 31, 2012 Report Share Posted January 31, 2012 I was reading on other forum about how someone was using toothpick quite successful. Link to comment Share on other sites More sharing options...
gmtlover Posted January 31, 2012 Author Report Share Posted January 31, 2012 I read that here too, but you can't tell me that's very accurate. Just hope someone like The Zigmeister for instance can give advice, warn for mistakes of made by noobs etc and how to avoid them of course Link to comment Share on other sites More sharing options...
Vandal Posted January 31, 2012 Report Share Posted January 31, 2012 I'd like to try it too. Link to comment Share on other sites More sharing options...
fijikid Posted January 31, 2012 Report Share Posted January 31, 2012 I believe a good method, though tedious, is an oiler and a high power loupe. Lots of little dots equals high dpi and good look - that's for dials. Hands require a hardish small tube to slide along underside of hand. Consistency of lume is critical here. Practice makes...ok. Good genes/steady hands makes perfect. Link to comment Share on other sites More sharing options...
gmtlover Posted January 31, 2012 Author Report Share Posted January 31, 2012 maybe the zigmeister can post a little vid to show us how he does some of his magic.. Or is that the same as asking an illusionist how he performs his tricks? Link to comment Share on other sites More sharing options...
TeeJay Posted January 31, 2012 Report Share Posted January 31, 2012 The best tip the Zigmeister gave me for luming, is to practice on magazine covers to get used to curves, corners and angles As for tools, I got one of the nylon 'ties' used to fix tags to clothing, cut it to a 2" length, and taped it to the blunt end of a pencil so it had about an inch hanging over the end of the pencil Link to comment Share on other sites More sharing options...
gmtlover Posted January 31, 2012 Author Report Share Posted January 31, 2012 The best tip the Zigmeister gave me for luming, is to practice on magazine covers to get used to curves, corners and angles As for tools, I got one of the nylon 'ties' used to fix tags to clothing, cut it to a 2" length, and taped it to the blunt end of a pencil so it had about an inch hanging over the end of the pencil Interesting, but how do you fill up the hands? with straight lines, not spilling A tie is way to big for that not? Link to comment Share on other sites More sharing options...
mikellem Posted January 31, 2012 Report Share Posted January 31, 2012 I read that here too, but you can't tell me that's very accurate. Just hope someone like The Zigmeister for instance can give advice, warn for mistakes of made by noobs etc and how to avoid them of course I would not expect The Zigmeister to show his secrets especially since he is the king of lump... MM Link to comment Share on other sites More sharing options...
gmtlover Posted January 31, 2012 Author Report Share Posted January 31, 2012 I would not expect The Zigmeister to show his secrets especially since he is the king of lump... MM I know he probably won't but maybe he wants to give a few tips, and especially what tools to use? or which superluminova do I have to use to get the blue lume on my DSSD? I know chroma light is used by rolex, but is this available for noobs like me? Or are there perhaps other options? unfortunately there isn't a topic yet here with a good tut.. funny because almost everything else is discussed here, that's what is great about this forum. No guides yet unfortunately on this. Link to comment Share on other sites More sharing options...
TeeJay Posted January 31, 2012 Report Share Posted January 31, 2012 Interesting, but how do you fill up the hands? with straight lines, not spilling A tie is way to big for that not? When I say 'tie' I can't think of what you'd actually call the bit, but they're only about a millimeter thick, if that Hands're easiest of all First, use something like nail varnish remover to remove the existing lume, then just load the tip of your luming tool with a small bead of your lume material (in the past I've used Revell Night Color) and run the bead of paint along the back surface of the hand, and it'll settle perfectly Link to comment Share on other sites More sharing options...
gmtlover Posted January 31, 2012 Author Report Share Posted January 31, 2012 When I say 'tie' I can't think of what you'd actually call the bit, but they're only about a millimeter thick, if that Hands're easiest of all First, use something like nail varnish remover to remove the existing lume, then just load the tip of your luming tool with a small bead of your lume material (in the past I've used Revell Night Color) and run the bead of paint along the back surface of the hand, and it'll settle perfectly Thnx for the advice, will give it a try! on the site of tritec I found a lume application tool called zeller stylograph, is a tool like that available somewhere? Would like to try that too.. And what lume do I need for a DSSD. Don't mind paying some money for it.. I will practice on magazines first like the Zigmeister said. How can I remove the lume from the hands? some say just throw them in nail polish remover for a while. Link to comment Share on other sites More sharing options...
TeeJay Posted January 31, 2012 Report Share Posted January 31, 2012 Thnx for the advice, will give it a try! on the site of tritec I found a lume application tool called zeller stylograph, is a tool like that available somewhere? Would like to try that too.. And what lume do I need for a DSSD. Don't mind paying some money for it.. I will practice on magazines first like the Zigmeister said. How can I remove the lume from the hands? some say just throw them in nail polish remover for a while. No worries, glad to be of help Not sure where you might get a stylograph, maybe eBay? As for the lume forthe DSSD, I believe it's SuperLuminova, but I'm not 100% sure... As above, just put the hands in nail polish remover and let the solvent work it's magic Best to do that in a ventilated area if you want a steady hand for the reluming Link to comment Share on other sites More sharing options...
mikellem Posted February 1, 2012 Report Share Posted February 1, 2012 I know he probably won't but maybe he wants to give a few tips, and especially what tools to use? or which superluminova do I have to use to get the blue lume on my DSSD? I know chroma light is used by rolex, but is this available for noobs like me? Or are there perhaps other options? unfortunately there isn't a topic yet here with a good tut.. funny because almost everything else is discussed here, that's what is great about this forum. No guides yet unfortunately on this. I agree, that would be nice.. MM Link to comment Share on other sites More sharing options...
gmtlover Posted February 1, 2012 Author Report Share Posted February 1, 2012 So far no reactions from the established lumers, Zig? PBdad? Domi? Who else does it on a regular base? Link to comment Share on other sites More sharing options...
duke1973 Posted February 1, 2012 Report Share Posted February 1, 2012 I think the blue lume is Superluminova BGW9....It's white in daylight and glows blue at night. Link to comment Share on other sites More sharing options...
maxman Posted February 1, 2012 Report Share Posted February 1, 2012 The best tip the Zigmeister gave me for luming, is to practice on magazine covers to get used to curves, corners and angles As for tools, I got one of the nylon 'ties' used to fix tags to clothing, cut it to a 2" length, and taped it to the blunt end of a pencil so it had about an inch hanging over the end of the pencil Sounds like some good advice bro...Im going to have to try that...thanks. mike Link to comment Share on other sites More sharing options...
gmtlover Posted February 1, 2012 Author Report Share Posted February 1, 2012 I think the blue lume is Superluminova BGW9....It's white in daylight and glows blue at night. thnx! Can more people confirm this? And do you know where to source this? Link to comment Share on other sites More sharing options...
FxrAndy Posted February 1, 2012 Report Share Posted February 1, 2012 That is the correct lume and it is sourced from Tritec, generaly you need to be registered as a bussiness to buy from them and it is not cheep, The reason why there is not a lume tutorial is that it is not something that you could gain alot from a tutorial, it requires different mixes for different textures, dial designs ect, Buy a bergion lume set or somthing like that and try with that first before you spend €70 plus on some tritec if you realy want some BGw9 pm me 1 Link to comment Share on other sites More sharing options...
gmtlover Posted February 3, 2012 Author Report Share Posted February 3, 2012 And some advice from The Zigmeister? Link to comment Share on other sites More sharing options...
devus Posted February 10, 2013 Report Share Posted February 10, 2013 zeller stylograph might do the trick and take you all out of the dark ages. Lol Link to comment Share on other sites More sharing options...
SSTEEL Posted February 10, 2013 Report Share Posted February 10, 2013 Check out Kenny's Lume guide, and be prepared to dribble. Amazing work Kenny has done. Link to comment Share on other sites More sharing options...
gmtlover Posted February 10, 2013 Author Report Share Posted February 10, 2013 Kenny's lume guide? Link to comment Share on other sites More sharing options...
SSTEEL Posted February 10, 2013 Report Share Posted February 10, 2013 [TUTORIAL] ULTIMATE RELUME of Omega Ploprof to look like GEN Link to comment Share on other sites More sharing options...
SSTEEL Posted February 10, 2013 Report Share Posted February 10, 2013 Oh right, I would be interested in finding out more on the process too. It's an area of watches which fascinates me, and has since I was a kid. Is it true that in old watches this lume was/is radio active? Or is this a myth I was told many moons ago? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now