klocklind1 Posted March 11, 2012 Report Share Posted March 11, 2012 I just got a brand new MBW 1680 from a member and it is not fitted with a "bezel Flat Friction Washer" that I thought should be under the bezel !!!?? My MBW 1680 case does NOT have this "bezel Flat Friction Washer" but it feels OK to turn the bezel ! Is a washer normally fitted on the MBW 1680 case and is it needed? And if so, can it fit under the bezel if it has not been fitted with one from the beginning? Quote Link to comment Share on other sites More sharing options...
Justasgood Posted March 11, 2012 Report Share Posted March 11, 2012 remove the bezel and look behind the insert.... Quote Link to comment Share on other sites More sharing options...
klocklind1 Posted March 11, 2012 Author Report Share Posted March 11, 2012 remove the bezel and look behind the insert.... I have checked but there is no washer there My question is IF there normally IS a washer on the MBW 1680 case ? Quote Link to comment Share on other sites More sharing options...
FxrAndy Posted March 11, 2012 Report Share Posted March 11, 2012 yes there is Quote Link to comment Share on other sites More sharing options...
vlydog Posted March 11, 2012 Report Share Posted March 11, 2012 yes, it should have one Quote Link to comment Share on other sites More sharing options...
klocklind1 Posted March 11, 2012 Author Report Share Posted March 11, 2012 OK thanks Then I will buy one from Clarks Will that fit the MBW 1680 case? Quote Link to comment Share on other sites More sharing options...
jmb Posted March 12, 2012 Report Share Posted March 12, 2012 Why do you want to add one when you say it turns properly... Quote Link to comment Share on other sites More sharing options...
klocklind1 Posted March 12, 2012 Author Report Share Posted March 12, 2012 Why do you want to add one when you say it turns properly... You are right Perhaps it is not nessecery if it turens easy as well, but I was thinking it will turen a little bit more easy if I I ad one. THAT IF there is space for it ? Quote Link to comment Share on other sites More sharing options...
Robaer Posted March 12, 2012 Report Share Posted March 12, 2012 The washer will not make the bezel easier to turn, it's meant to lock the bezel in place when you're not turning it. With the washer installed it acts like a spring and you have to press down the bezel ring to turn it. Quote Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted March 12, 2012 Report Share Posted March 12, 2012 You are right Perhaps it is not nessecery if it turens easy as well, but I was thinking it will turen a little bit more easy if I I ad one. THAT IF there is space for it ? the point of the washer is to occupy space and add resistance to the bezel, you dont want a bezel that can turn with out you first pushing down on it and turning. its a safety feature for divers. you should bend the washer slightly so it doesnt sit flat, then it will push against the compression ring and the bezel ring when installed and you wont be able to turn it easily (which is a good thing) with out first pushing down on the bezel ring compressing the bend and allowing for space to turn the ring. releasing the bezel ring will allow the friction washer to release the energy and apply resistance against the two pieces locking it in place and it should be harder to turn by accident when diving. its called a "friction" washer or "tension spring" for a reason, and even in the rolex owners literature they make reference on using it in this exact manner. the rolex "auto lock" revolving bezel Quote Link to comment Share on other sites More sharing options...
klocklind1 Posted March 12, 2012 Author Report Share Posted March 12, 2012 Thanks a lot for that info highoeyazmuhudee My bezel IS easy to turn when I press it down and not so easy to turn when I do not press it down But I think I will order one of those washers from Clarks as they do not cost more than 6 $ Quote Link to comment Share on other sites More sharing options...
FxrAndy Posted March 12, 2012 Report Share Posted March 12, 2012 Are you sure that there is not a washer in there????? With out one it would make no difference I there was One or not it would just spin Quote Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted March 14, 2012 Report Share Posted March 14, 2012 Thanks a lot for that info highoeyazmuhudee My bezel IS easy to turn when I press it down and not so easy to turn when I do not press it down But I think I will order one of those washers from Clarks as they do not cost more than 6 $ you definitely should. it also acts as a point of wear instead of rotating on the bare mid case metal Quote Link to comment Share on other sites More sharing options...
klocklind1 Posted March 14, 2012 Author Report Share Posted March 14, 2012 you definitely should. it also acts as a point of wear instead of rotating on the bare mid case metal There WAS a washer , I did not noteced it at the first as it was sitting in the bezel under the insert, not loose as on the 16610 Quote Link to comment Share on other sites More sharing options...
Robaer Posted March 14, 2012 Report Share Posted March 14, 2012 I KNEW it! Exactly what justasgood was saying. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.