misiekped Posted February 3, 2014 Report Posted February 3, 2014 After service yes Before service yes, not sure for how long
benjji Posted February 3, 2014 Report Posted February 3, 2014 (edited) ok perfect... and i believe that you're the only one who can service it Edited February 3, 2014 by benjji
misiekped Posted February 3, 2014 Report Posted February 3, 2014 This I don't know I guess I'm not the only one They basically R3135
EEngels Posted February 3, 2014 Report Posted February 3, 2014 The winding bridge fits and work perfectly That's very nice. Very, very nice. Sent from my mobile device
misiekped Posted February 9, 2014 Report Posted February 9, 2014 Yuki with auto winding assembly rotor and winding bridge Also canon/minute pinion, hour wheel, date jumper and few other gen parts Looks like yuki is really gen spec
Ephry73 Posted February 9, 2014 Report Posted February 9, 2014 Yuki with auto winding assembly rotor and winding bridge Also canon/minute pinion, hour wheel, date jumper and few other gen parts Looks like yuki is really gen spec Been saying it all along. Now I see the prices went up on the site but still shows unavailable.
benjji Posted February 9, 2014 Report Posted February 9, 2014 just a question.. does Yuki guarantee repair / exchange if the movemnet fails ?
misiekped Posted February 17, 2014 Report Posted February 17, 2014 just a question.. does Yuki guarantee repair / exchange if the movemnet fails ? Who does that?
garyb Posted February 17, 2014 Report Posted February 17, 2014 Yuki GMT Correct hands stock Will that fit in most rep cases?
misiekped Posted February 17, 2014 Report Posted February 17, 2014 Don't have a BP case to test it But will love to check
AKTime Posted February 17, 2014 Report Posted February 17, 2014 I can not wait to have my hands on one of these!
ceocorona Posted February 18, 2014 Report Posted February 18, 2014 Don't have a BP case to test it But will love to check This would have been a nice experiment when you had my BP. Keep us posted. This would be a perfect mod for any franken GMTc.
misiekped Posted February 18, 2014 Report Posted February 18, 2014 This would have been a nice experiment when you had my BP. Keep us posted. This would be a perfect mod for any franken GMTc. Yeah I received the parts two days to late
misiekped Posted February 18, 2014 Report Posted February 18, 2014 I can not wait to have my hands on one of these! This is only based on Yuki 3135 But need a lot of gen parts to convert
AKTime Posted February 18, 2014 Report Posted February 18, 2014 This is only based on Yuki 3135 But need a lot of gen parts to convert As long as the base movement has been confirmed as accepting gen parts I am fine with putting the money into gen upgrades for it. Thanks for doing all of this testing. How does the movement run with the gen parts?
misiekped Posted February 18, 2014 Report Posted February 18, 2014 The parts for gmt was installed on a serviced yuki , and did not change any performance
Ephry73 Posted February 18, 2014 Report Posted February 18, 2014 I know for a fact the y3135 fits in a BP Seadweller 16600 case set
misiekped Posted February 18, 2014 Report Posted February 18, 2014 I know for a fact the y3135 fits in a BP Seadweller 16600 case set Ephry After new gen parts went in the movement gain in hight about 0.7mm, and did not fit on ST case To deep and the movement screws don't fit anymore under the holding slot Do you have any case to borrow?
Ephry73 Posted February 18, 2014 Report Posted February 18, 2014 Ephry After new gen parts went in the movement gain in hight about 0.7mm, and did not fit on ST case To deep and the movement screws don't fit anymore under the holding slot Do you have any case to borrow? M, The ST case you were using is not correct for the 3135 movement. You were using a case designed for a 3035 movement. This is why you had issues to begin with. With the correct case the figment should be fine. My 16610 with y3135 watches have been a perfect fit in every aspect using gen set screws.
misiekped Posted February 18, 2014 Report Posted February 18, 2014 E I'm not talking about that issue I know the y3135 doesn't fit in st3035 case I have two st3135 cases and yuki fit perfect in them The Franken movement which I did is taller then stock yuki I need a BP gmt-c case to test it
Ephry73 Posted February 18, 2014 Report Posted February 18, 2014 Gotcha. Well, I am sure one of those cases will pop up. E
misiekped Posted February 22, 2014 Report Posted February 22, 2014 I can proudly announce I can get any spare parts for the movement
misiekped Posted February 22, 2014 Report Posted February 22, 2014 A lot of work and research Can do any Franken from your yuki 3135 Anything which you can think off
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now