dutchguy2 Posted January 6, 2013 Report Share Posted January 6, 2013 Can't seem to find one. Sean does not sell parts, BK does not have them, no reply (yet) from TC. Link to comment Share on other sites More sharing options...
alligoat Posted January 6, 2013 Report Share Posted January 6, 2013 Usual suspects- Clark's and Wholesaleoutlet990. Also, you can keep an eye on ebay. You're buying aftermarket parts so the fit may not be perfect and may require a little massaging- i.e. filing! Link to comment Share on other sites More sharing options...
dutchguy2 Posted January 6, 2013 Author Report Share Posted January 6, 2013 Thanks. I know that WSO has them but would like to avoid them. Did not know Clark had them. Will check this out. Link to comment Share on other sites More sharing options...
Ephry73 Posted January 6, 2013 Report Share Posted January 6, 2013 The ST case comes with one Dutch Link to comment Share on other sites More sharing options...
dutchguy2 Posted January 6, 2013 Author Report Share Posted January 6, 2013 Thanks mate. But, I need an other one for my WM9 case. It has one but the bezel is not turning. I think it is due the thick retaining ring but it can also be the bezel. Link to comment Share on other sites More sharing options...
Ephry73 Posted January 6, 2013 Report Share Posted January 6, 2013 The culprit on these issues is always the thicker than gen retainer ring. You can try filing it on a drill or drill press and see if it helps. i think BK did a tutorial on it. Link to comment Share on other sites More sharing options...
dutchguy2 Posted January 6, 2013 Author Report Share Posted January 6, 2013 can some one point me to the clark retaining ring? Link to comment Share on other sites More sharing options...
alligoat Posted January 6, 2013 Report Share Posted January 6, 2013 I didn't see it in a quick run thru the store on ebay- might email gary and see if he has any more or expects to get them soon. Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted January 7, 2013 Report Share Posted January 7, 2013 forget WSO. dont waste your time there their assembly lets in moisture. whats your budget? Link to comment Share on other sites More sharing options...
oldtools Posted January 7, 2013 Report Share Posted January 7, 2013 The best way to go is to get the entire bezel assembly, that way you know all the pieces are compatible. Gary at nostalgia-2000 on ebay, has a nice bezel assembly. It looks like gen, but it does not use a friction washer like gen. It is reasonably priced at $40-$50. I checked and he currently doesn't have one on ebay. The TC crystal retainer does not fit a gen bezel, the outer diameter is too big. Link to comment Share on other sites More sharing options...
Ephry73 Posted January 7, 2013 Report Share Posted January 7, 2013 Dutch, PM me when you get a chance. E Link to comment Share on other sites More sharing options...
dutchguy2 Posted January 7, 2013 Author Report Share Posted January 7, 2013 forget WSO. dont waste your time there their assembly lets in moisture. whats your budget? I don't realy have a limit, as long it is still reasonable. Want to put the best parts togetter for an ultimate sub lv without a gen movement. Link to comment Share on other sites More sharing options...
Ephry73 Posted January 14, 2013 Report Share Posted January 14, 2013 Then get a complete ST and call it good Link to comment Share on other sites More sharing options...
dutchguy2 Posted January 14, 2013 Author Report Share Posted January 14, 2013 I did LOL. But.... as always change of plans. I ordered the 3135 case but I bought some gen parts for a 16800 build so I am in need of a 3035 case LOL. ST again I think. Link to comment Share on other sites More sharing options...
Ephry73 Posted January 14, 2013 Report Share Posted January 14, 2013 Hahaha. Could you take measurements of the side of your 3135 case? Link to comment Share on other sites More sharing options...
correctime Posted January 14, 2013 Report Share Posted January 14, 2013 A Clark bezel ring will not fit the WM9, TW, TC or ST retaining ring correctly Link to comment Share on other sites More sharing options...
correctime Posted January 14, 2013 Report Share Posted January 14, 2013 I have a WM9 v2 bezel assembly from BK with the retainer already filed to fit the gen insert. PM me if this will help your cause Brother Link to comment Share on other sites More sharing options...
dutchguy2 Posted January 14, 2013 Author Report Share Posted January 14, 2013 Thanks correctime. E, I will measure as soon it arrives. Link to comment Share on other sites More sharing options...
dutchguy2 Posted January 15, 2013 Author Report Share Posted January 15, 2013 Thanks to a great member, correctime, this is sorted for me. Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now