dan_189 Posted January 22, 2013 Report Share Posted January 22, 2013 Hey guys, My 16610 Sub is all done Parts list: - Sean 16610 case - Genuine MK3 "Swiss made" Z Serial dial - Genuine hands - Genuine Rolex 3135 - Genuine crown - Genuine AR crystal - Genuine bezel - Genuine bezel insert - Genuine 93250 bracelet - Genuine spring bars - Genuine 93250 clasp Lessons learnt: - Always try to buy a genuine bezel assembly as a SET! I went through 2 bezels until I got a setup that worked - I tried to use a genuine tube and failed, it doesnt fit without work. I needed to tap the case... Even after that the case needed to be countersunk its difficult and time consuming. The tube the Sean comes with fits a genuine crown, save your time! Other than that its been... well fun to a point then it got annoying, now im happy with it. Thanks to all who helped out and gave advice, you know who you are Pics!! Thats not my wrist BTW! haha Cheers!! Link to comment Share on other sites More sharing options...
Guest zeleni kukuruz Posted January 22, 2013 Report Share Posted January 22, 2013 Congrates on work well done!!! You most be proud Link to comment Share on other sites More sharing options...
dan_189 Posted January 22, 2013 Author Report Share Posted January 22, 2013 Thanks Yeah was a journey! Awesome to have the ability to know how it all goes together and that I sourced everything myself Link to comment Share on other sites More sharing options...
ck5533 Posted January 22, 2013 Report Share Posted January 22, 2013 phew................finally you've done it. wear it in good health! Link to comment Share on other sites More sharing options...
dan_189 Posted January 22, 2013 Author Report Share Posted January 22, 2013 I know was a lonnnnnng time coming! Hows your project going? Link to comment Share on other sites More sharing options...
krpster Posted January 22, 2013 Report Share Posted January 22, 2013 Looks fantastic. Congrats on a great build Link to comment Share on other sites More sharing options...
ck5533 Posted January 22, 2013 Report Share Posted January 22, 2013 I know was a lonnnnnng time coming! Hows your project going? mine was done long time ago. enjoy every second of it. Link to comment Share on other sites More sharing options...
Ephry73 Posted January 22, 2013 Report Share Posted January 22, 2013 Very nice indeed brother. I'm going a similar route for my wife's birthday gift. Congrats! Link to comment Share on other sites More sharing options...
panerai153 Posted January 22, 2013 Report Share Posted January 22, 2013 Did you keep up with the prices of all the parts? It would be nice to see what one could expect to shell out for a project like this? Just wondering how close all your parts were to the price of a genuine 16610? it is a a beautiful job, and I'm sure will be a source of pride for you. Link to comment Share on other sites More sharing options...
irolexu Posted January 22, 2013 Report Share Posted January 22, 2013 I am wearing this exact set up spec for spec Link to comment Share on other sites More sharing options...
correctime Posted January 22, 2013 Report Share Posted January 22, 2013 GREAT job Brother!! I know you're proud. Wear it proudly and in good health.,,,itsa Beauty!!!! As for cost.... I'd venture to say within 1.2k of a nice preowned gen is likely a good guess. But with a build like this I'm certain it wasn't an issue of cost....it's all about the self accomplishment and pride. Millions can say they own a gen 16610 but how many can honestly say "hey, I built this one myself" ?? Link to comment Share on other sites More sharing options...
panerai153 Posted January 22, 2013 Report Share Posted January 22, 2013 GREAT job Brother!! I know you're proud. Wear it proudly and in good health.,,,itsa Beauty!!!! As for cost.... I'd venture to say within 1.2k of a nice preowned gen is likely a good guess. But with a build like this I'm certain it wasn't an issue of cost....it's all about the self accomplishment and pride. Millions can say they own a gen 16610 but how many can honestly say "hey, I built this one myself" ?? I only brought this up to get and idea as to what it 's costing. I would have guessed that it would be pretty close to the price of a good used 16610. And don't get me wrong, I appreciate the challenge of gathering parts and coming up with something better. I only have one rep that hasn't undergone extensive mods, and that's a UN Black Surf that I rarely wear.Everything else is modded., several of them are really "Superfrankens" I do know from experience selling modded watches, you seldom ever get even close to what you have invested. There have been some beautiful super modded watches on the sales forum here, over the years,and a fair number of them either sold at a deep discount, or were parted out to recoup as much of the cost as possible. the big problem is we love the ones we got, until we fall in love with the one we ain't got. That's why most of the guys on this and every watch forum are serial "flippers". Because of this terrible disease, we generally have to sell one to buy one, unless you are lucky enough to have deep,deep pockets, then you can just store away the old ones and get new ones. If it were me, and I'm only speaking for myself, because I have zero modding skills, I would have saved a few more pennies and bought a genuine. Maybe because my role in modding is a minor one, I am a parts gatherer and a check writer, not the guy who is actually putting the watch together, my take on this is different. Even though I fall in love with watches, i fall out of love with some of them just as fast, so I sort of look at the end game when the watch needs to be sold. How much is it going to bring, and how much money am I going to lose in the proscess. Link to comment Share on other sites More sharing options...
danielv2000 Posted January 22, 2013 Report Share Posted January 22, 2013 Nice build! I agree with Panerai153, at a certain threshold, just go gen. However, I am no modder so I also have to factor labor costs! Congrats. Link to comment Share on other sites More sharing options...
Tonyyammine Posted January 22, 2013 Report Share Posted January 22, 2013 Great job Link to comment Share on other sites More sharing options...
dan_189 Posted January 23, 2013 Author Report Share Posted January 23, 2013 Thanks guys! The total cost is aprox 3.5k or so and yes near a second hand gen price in the US. Its very different being in Australia though, typical ebay price (within Aus) is around 5.5k and from a second hand store I got quoted 6.5k for a 1992 without papers! Its insane here! So it was all about the challenge, there were times I wanted to give up and throw in the towel but I made it through! Link to comment Share on other sites More sharing options...
irolexu Posted January 23, 2013 Report Share Posted January 23, 2013 Dan189 if you ever do another gen 3135 make sure to never ever buy the movement alone! Always buy a TT DJ and scrap the movement and sell off the parts it will break down the cost to a minimum. I paid 2,000 for a DJ sold off all the parts and only ended paying 900.00 for a fresh serviced 3135 great watch btw! Link to comment Share on other sites More sharing options...
mjmj Posted January 23, 2013 Report Share Posted January 23, 2013 Wow! Congratulations on finishing this beauty. Wear it well. Looks very nice. Link to comment Share on other sites More sharing options...
dan_189 Posted January 23, 2013 Author Report Share Posted January 23, 2013 (edited) Dan189 if you ever do another gen 3135 make sure to never ever buy the movement alone! Always buy a TT DJ and scrap the movement and sell off the parts it will break down the cost to a minimum. I paid 2,000 for a DJ sold off all the parts and only ended paying 900.00 for a fresh serviced 3135 great watch btw! Thanks was thinking of doing that but couldnt find one lol but that is a good way to go If I do another it will be a vintage sub with plexi glass or something along those lines Edited January 23, 2013 by dan_189 Link to comment Share on other sites More sharing options...
Pussintheboot Posted January 23, 2013 Report Share Posted January 23, 2013 wow thats a gen there Link to comment Share on other sites More sharing options...
bwhitesox Posted January 23, 2013 Report Share Posted January 23, 2013 Thanks guys! The total cost is aprox 3.5k or so and yes near a second hand gen price in the US. Its very different being in Australia though, typical ebay price (within Aus) is around 5.5k and from a second hand store I got quoted 6.5k for a 1992 without papers! Its insane here! So it was all about the challenge, there were times I wanted to give up and throw in the towel but I made it through! What you talking about Willis...Plenty of gen Rollies around for 4k both Subs and seadwellers. Link to comment Share on other sites More sharing options...
dan_189 Posted January 23, 2013 Author Report Share Posted January 23, 2013 I couldnt find any not that I looked very hard! Its done now anyway when I looked subs were around 5-5.5k Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now