cc33 Posted March 16, 2013 Report Share Posted March 16, 2013 Well, I thought I should update everyone on my Minh situation where he sent me the wrong dial 2 times.. I had the option of getting a refund (after sending the 2 dials back) or taking a chance on a 3rd dial that he promised would be correct. I took a chance on the third dial only because I really really wanted a good 3-6-9 6538 dial. The dial came today and I have to say I don't think it's worth what he's charging but it is ok. The lume is not great but I like the gilt and the red depth is now raised paint. I guess if you are patient enough and willing to deal with the road bumps, he's not all that bad, just a very frustrating experience all in all. At least the dial is ok and useable now. Link to comment Share on other sites More sharing options...
correctime Posted March 16, 2013 Report Share Posted March 16, 2013 That's a very cool looking start And I'm no expert but that case looks awesome !!! Link to comment Share on other sites More sharing options...
freddy333 Posted March 16, 2013 Report Share Posted March 16, 2013 The variable white printing would still bother me, but it a step in the right direction. Link to comment Share on other sites More sharing options...
cc33 Posted March 16, 2013 Author Report Share Posted March 16, 2013 It's bothering me lots! I will prob figure out a way to erase the white lettering completely and make it a red depth 2 line. Thanks correctime, it's a phong case. Link to comment Share on other sites More sharing options...
cc33 Posted March 16, 2013 Author Report Share Posted March 16, 2013 Ummm that was a little easier than it should have been! Wow. Link to comment Share on other sites More sharing options...
mjmj Posted March 16, 2013 Report Share Posted March 16, 2013 That's very nice looking cc Link to comment Share on other sites More sharing options...
freddy333 Posted March 16, 2013 Report Share Posted March 16, 2013 I think you got lucky. Looks much better now. You might consider spraying a light coat of matte varnish, which will give it a slight texture, patina & tone down some of the shine. Link to comment Share on other sites More sharing options...
cc33 Posted March 16, 2013 Author Report Share Posted March 16, 2013 Thank you ill give that a try. Link to comment Share on other sites More sharing options...
freddy333 Posted March 16, 2013 Report Share Posted March 16, 2013 Before spraying your new dial, you should do a test spray on a scrap dial 1st. Link to comment Share on other sites More sharing options...
cc33 Posted March 16, 2013 Author Report Share Posted March 16, 2013 I will definitely practice a bunch first, thanks. This is the look I'm going for.. Link to comment Share on other sites More sharing options...
panerai153 Posted March 16, 2013 Report Share Posted March 16, 2013 Mighty nice. I definitely like the 2 line better!! Link to comment Share on other sites More sharing options...
freddy333 Posted March 16, 2013 Report Share Posted March 16, 2013 Ditto. Link to comment Share on other sites More sharing options...
Ephry73 Posted March 16, 2013 Report Share Posted March 16, 2013 That is looking superbly nice CC. I like it a lot better now. Definitely inboard with Freddy in the matte. Fine mist, rather than speckled. You may even try heating the dial first before spraying. I'm super jealous now. Link to comment Share on other sites More sharing options...
mjmj Posted March 16, 2013 Report Share Posted March 16, 2013 Very nice cc Link to comment Share on other sites More sharing options...
cc33 Posted March 17, 2013 Author Report Share Posted March 17, 2013 Thanks mj and E. I tried toning down the shine it looks a bit better now. Ill keep playing around til I'm satisfied. Link to comment Share on other sites More sharing options...
Tonyyammine Posted March 17, 2013 Report Share Posted March 17, 2013 I wouldnt buy from him. I been reading this from the begining. If you dont have the knowledge like some of you guys do this guy will rip you off 9 out of 10 times. Link to comment Share on other sites More sharing options...
Ephry73 Posted March 17, 2013 Report Share Posted March 17, 2013 Looks awesome. Leave it as is. Now, the hands Gilt hands that are aged are the trick. baking them in the ven is a trial and error thing. I one day will start working on my gen spec big crown. Thanks for sharing CC E Link to comment Share on other sites More sharing options...
cc33 Posted March 17, 2013 Author Report Share Posted March 17, 2013 Thank you E, I will leave it as is. I actually had a set of MY hands that I aged last week.. I took a mock pic with them before I worked on the dial so excuse the shine of the dial Link to comment Share on other sites More sharing options...
Ephry73 Posted March 17, 2013 Report Share Posted March 17, 2013 White seconds hand, correct? As Maurica sys, " That's it" E Link to comment Share on other sites More sharing options...
cc33 Posted March 17, 2013 Author Report Share Posted March 17, 2013 No, it's not correct for an explorer dial, I think it's supposed to be a gilt seconds hand.. Oh well.. 1 Link to comment Share on other sites More sharing options...
cc33 Posted March 17, 2013 Author Report Share Posted March 17, 2013 I wouldnt buy from him. I been reading this from the begining. If you dont have the knowledge like some of you guys do this guy will rip you off 9 out of 10 times. Yes, I agree that having some knowledge will help dealing with Minh. He seems to put on a show of ignorance when it's convenient for him, and at other times he's very knowledgable himself. Toss up I guess as to which side of Minh people will have to deal with on any given day. Not for the faint of heart! Link to comment Share on other sites More sharing options...
Donerix 2.0 Posted March 17, 2013 Report Share Posted March 17, 2013 great work on the dial texture Link to comment Share on other sites More sharing options...
cc33 Posted March 17, 2013 Author Report Share Posted March 17, 2013 Thank you! I've always admired your aging techniques. I was actually inspired by your red depth explorer dial. Great job on yours! I was impatient in waiting to get to a store to find matt spray. I put the dial in a ziplock bag, closed it and made a hole for a straw. Then I lit a Cigarette and blew the smoke into the bag through the straw. It only took 3 tries til the bag was filled with smoke. I plugged the straw and waited until the smoke settled, then I took out the dial and was pleasantly surprised. The smoke settled evenly giving it a much less shiny appearance. Hopefully it won't come off when my watchmaker installs it into the case. On a side note the dial was slightly too large to fit in the phong case so I had to sand the outer edge. Link to comment Share on other sites More sharing options...
cc33 Posted March 19, 2013 Author Report Share Posted March 19, 2013 Kicked it up a notch.. Figured y not, a 60+ year old dial should have some age to it right Link to comment Share on other sites More sharing options...
mjmj Posted March 19, 2013 Report Share Posted March 19, 2013 CC, It looks fantastic. Your methods seem to working a treat. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now