dieselpower Posted May 17, 2013 Report Share Posted May 17, 2013 I've got a friends V72 powered silver 6263 with my watchsmith and he's had to break the large centre chrono seconds hand to remove the movement for servicing. He is adamant it wasn't his fault and says the watchmaker who assembled the piece was a 'butcher' - but that's another story. Anyway, I need to replace that broken seconds hand and get it to my watchsmith toute suite! Anybody able to sell me one quickly? Odd request I know but if you don't ask - you don't get. Cheers all. Link to comment Share on other sites More sharing options...
dieselpower Posted May 17, 2013 Author Report Share Posted May 17, 2013 He said the previous watchmaker had 'forced it on' somehow and it wouldn't come off without breaking it. He was very scathing about his work. To be honest I don't know what to believe. Link to comment Share on other sites More sharing options...
tomhorn Posted May 17, 2013 Report Share Posted May 17, 2013 Thinking I remember seeing something about Clarks selling them. I haven't been down this franken path yet, so I can't give you any insight as to how good they are. Link to comment Share on other sites More sharing options...
cc33 Posted May 17, 2013 Report Share Posted May 17, 2013 They have to be crimped on or epoxy'd/glued on sometimes. Phong will have the hand, will cost you more than dw but who know where he is right now.. Ill check when I get home, I might have one, if I do you can have it just pay the shipping Link to comment Share on other sites More sharing options...
freddy333 Posted May 17, 2013 Report Share Posted May 17, 2013 Yuki & Phong have them in sets or, if you are willing to throw the dice, Mr. Slimeball always has 62xx handsets. In either case, I would strongly recommend that you have your watchmaker apply some epoxy to the the hand tube/wand intersection. Otherwise, you will be posting back with 'When I reset, the hand stops at a different place every time' Link to comment Share on other sites More sharing options...
cc33 Posted May 17, 2013 Report Share Posted May 17, 2013 If either of these are the right color you can have em Link to comment Share on other sites More sharing options...
Rolexman Posted May 17, 2013 Report Share Posted May 17, 2013 The hand is not glued. It is the tube that is pressure fitted into the hand that is glued. The tube than needs to be pinched.... Oh man no one will ever understand what I just wrote Link to comment Share on other sites More sharing options...
buffedupboy Posted May 18, 2013 Report Share Posted May 18, 2013 um.... hope you guys are kidding about the epoxy...... if you get slimeball hands, you'll need to crimp the tube. I don't recommend you do this if you aren't a watchsmith. It requires alot of crimping because the tube is just too large. Link to comment Share on other sites More sharing options...
dieselpower Posted May 18, 2013 Author Report Share Posted May 18, 2013 Thanks for help and advices chaps, I've PM'd cc33 to take him up on his kind offer and I'll send the hand to my watchsmith and let him deal with it. He's very experienced and I'm sure he'll fathom it out. Will let you know how it turns out. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now