dbutlerman Posted July 24, 2013 Report Share Posted July 24, 2013 Does anybody know how the crystal on a Gen Rolex 16800 attaches to the case? Does it press in from the back side, or press in from the front? Is there a gasket like on an Omega? I assume it doesn't attach with a tension ring like a 1680 Pics would be great. Not planning on doing anything with mine, just curious as to how to goes together... Link to comment Share on other sites More sharing options...
vlydog Posted July 24, 2013 Report Share Posted July 24, 2013 16800 should have retaining ring and friction washer under the bezel. Link to comment Share on other sites More sharing options...
Ephry73 Posted July 24, 2013 Report Share Posted July 24, 2013 Order of installation:CaseCrystal to gasketPress the crystal/nylon gasket combo onto case by hand. Should feel it click at leastPress retainer ring around nylon gasket against the case with a crystal press (use M die for this)Add click spring, then spring washerPress bezel onto retaining ring assemblyPress insert an ensure it is aligned to markers correctly. Enjoy! Link to comment Share on other sites More sharing options...
alligoat Posted July 24, 2013 Report Share Posted July 24, 2013 16800, 168000 and 16610 all have the exact same assembly and parts are interchangeable Link to comment Share on other sites More sharing options...
gavidoc Posted July 25, 2013 Report Share Posted July 25, 2013 As others have said it uses a retainer ring. Only difference between a 1680 and a 16800 is that they removed the wall from the acrylic crystal and turned it into a gasket for the 16800. When installing the gasket make sure that the lip fits into the groove in the sidewall of the crystal. Otherwise installation will be tricky. Key for making sure the "teeth" alignment for the bezel is correct to the 12 marker is to make sure the hole for the click spring on the retaining ring is at the 6 minute marker. Link to comment Share on other sites More sharing options...
dbutlerman Posted July 31, 2013 Author Report Share Posted July 31, 2013 Got it! Thanks guys! The 1680 to 16800 comparison helps! Link to comment Share on other sites More sharing options...
dbutlerman Posted July 31, 2013 Author Report Share Posted July 31, 2013 ...and just to make sure I understand, you can remove the crystal from the outside of the case, just like a 1680? Remove Bezel Assembly, Retainer ring, and then the gasket and crystal will pop out? Link to comment Share on other sites More sharing options...
Ephry73 Posted July 31, 2013 Report Share Posted July 31, 2013 Yes. That is correct. Make sure you remove the crystal retainer first. Link to comment Share on other sites More sharing options...
gavidoc Posted August 1, 2013 Report Share Posted August 1, 2013 ...and just to make sure I understand, you can remove the crystal from the outside of the case, just like a 1680? Remove Bezel Assembly, Retainer ring, and then the gasket and crystal will pop out? Typically the crystal and gasket will come off with the retainer. To remove the crystal you need to use a plug with a hole for the cyclops. Push the crystal and it will release. Typically a crystal press or a drill press with a plastic insert is needed (this is what I use). Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now