Dreamer Posted March 1, 2014 Report Posted March 1, 2014 First of all the watches are very similar...BUT the one big difference that you can tell right away is the AR on the 5.1 is much better. Watch looks amazing. I do however have an issue with the V5.1...it looks like a particle of dust or something else got under the crystal when it was being assembled. If I have it disassembled and cleaned then assembled will it still be waterproofed? I received a slip saying it was tested and it passed. Pay attention between the "17" and "18". I didnt notice it in the QC photos I supposed. V5 on left
panerai153 Posted March 1, 2014 Report Posted March 1, 2014 Definitely something there. hard to tell what it is, but it's not supposed to be there. AFA the Water resistance, if it's all put back correctly, it should be but no guarantee unless it's pressure tested again. should only have to take the back off and uncase the movement to get to the dial, so crystal shouldn't be disturbed, but you have to take the stem out and put it back, plus seal up the back, so I would not assume it still is water resistant. And to be honest with you, I would not believe a TD that it was tested and passed. If they leave crap inside on the dial, who knows how skillful they were in closing up the watch.
Guest Posted March 1, 2014 Report Posted March 1, 2014 The testing done by the TD is not professional work. I imagine a glass of water at the end of an assembly line. 10% of the watches go into the water. The ones that don't fog up get shipped as water proof. If theres one that fails the chinese kid that assembled it gets a beating.
Mike on a bike Posted March 1, 2014 Report Posted March 1, 2014 "I would not believe a TD that it was tested and passed" bet my life on that one.................. "The testing done by the TD is not professional work. I imagine a glass of water at the end of an assembly line. 10% of the watches go into the water. The ones that don't fog up get shipped as water proof. If theres one that fails the chinese kid that assembled it gets a beating." LOL
billyfras Posted March 2, 2014 Report Posted March 2, 2014 (edited) Sweet, sweet looking pieces. .. So which one you gonna sell? Edited March 2, 2014 by billyfras
edgematic1 Posted March 2, 2014 Report Posted March 2, 2014 Lovely! is the datewheel on the V5 updated or am I just seeing it wrong?
bahamuthx Posted March 11, 2014 Report Posted March 11, 2014 Is the brush finish on V5 looks more finer compare to v5.1 in person?
m5smg2 Posted March 13, 2014 Report Posted March 13, 2014 I was gonna ask about the finish too. I've read that the V5 has a smoother or more gen like finish compared to the noob 3.5/4.1. How is the case and bezel finishing on V5 comapred to the new 5.1? Thanks!
Dreamer Posted March 14, 2014 Author Report Posted March 14, 2014 Finish is a little better yes. It's the crystal that to me looks very different.
Nightwatch Posted March 15, 2014 Report Posted March 15, 2014 Nice comparison pics, thx for sharing. The bezel numbers on the V5.1 are smaller, how noticeable is it on the wrist? Any more differences apart from the crystal ar? As You have both for now this is most interesting:)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now